CNC valdymas koordinačių matavimo mašinai

Wenzel WPC2000

Sąlyga: geras (naudotas), Gamybos metai: 2004, Clamping knife head type (max.): 460 mm Knife head weight (max.): 150 kg Mounting plate diameter for knife heads (Ø): 360 mm Mounting taper for knife heads, nominal diameter Ø: 58.227 mm Travel distance - Z axis: 200 mm Chart recording magnification: ±10 - ±500 µm Machine weight approx.: 2.3 t Space requirement approx.: 2 x 1.5 x 2.03 m In the manufacturing process for spiral bevel gears, the quality of the gear cutting tools used is critical. Especially in dry cutting, achieving high gear quality and long tool life is only possible with precisely adjusted cutter heads. The Oerlikon Cutter Head Setting and Testing Device CS 200 enables quick and easy adjustment of individual cutters, checks their position, and documents the measurement results. The measuring process on the CNC-controlled testing device is semi-automated: Each step in the procedure is displayed on the screen via operator guidance. The positioning of individual cutters in the cutter head and the height of the cutter tips are managed by a special process that is largely automatic and simultaneously documented in a runout diagram. A subsequent measuring run checks the radial position of the inner and outer cutting edges of all the knives in the cutter head. If individual test parameters on the knives do not meet the specified tolerances, they can be individually readjusted. Combining a semi-automated setting sequence, operator-guided setup actions, and automated measurement procedures, cutter heads can be adjusted conveniently, quickly, and with high precision. Operator-guided setting and testing sequence: - Graphical display of the cutter head configuration and measurement results with tolerance monitoring - Step-by-step operator instructions in plain text (without coded information) - Simple assignment of measurement results to individual cutters - Documentation of adjustment and measurement results via printer - Setting and testing sequence suitable for stick blade cutter heads of the types ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® Ncjdpfx Aoul Efmsf Isl - Interface for neutral data

Sąlyga: geras (naudotas), Gamybos metai: 2019, Funkcionalumas: visiškai funkcionalus, matavimo diapazonas X ašis: 500 mm, matavimo diapazonas Y ašis: 700 mm, matavimo diapazonas Z ašis: 500 mm, garantijos trukmė: 12 mėnesiai, Įranga: dokumentacija / vadovas, PRISTATYMAS TIK JK Global S Green 05.07.05 HH-AS6-T5, 5° automatinė sukamų padėčių galvutė Ncsdsu Snthepfx Af Ijl HP-TM prisilietimo daviklis (zondas) Standartinių stilusų komplektas PC-DMIS matavimo programinė įranga Pagaminimo metai: 2019 Dėl alternatyvių konfigūracijų prašome susisiekti su mumis. Matavimo diapazonas: X 500 mm, Y 700 mm, Z 500 mm MPE(E0/E150) (18°C – 22°C): 1,5 + L/333

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2006, Working area X/Y: 1000mm/2200mm, accuracy: 0.8 + L/450µm, max. workpiece weight: 800kg, machine dimensions X/Y: approx. 3000mm/2800mm, weight: approx. 4000kg. Includes Wenzel HT 400 manual controller, computer with 2 TFT monitors, and Kyocera laser printer. Probe not included. Documentation available. On-site inspection possible. Ncjdsu T Rhzjpfx Af Iel

Sąlyga: naudotas, Gamybos metai: 2012, x eiga 1600 mm Ncodpfx Afjxcbhxo Iel y eiga 4000 mm z eiga 1200 mm Ruošinio svoris 3500 kg

Sąlyga: naujas, Mėsos malūnėlis S32F Unger sistema 5 įrankiai Nsdpfx Asp R Sdwef Ijcl Gamintojas: Sind Modelis: S32F Matmenys: 600x550x1000 mm Elektros galia: 1,5 kW Talpa: 500 kg/val

Sąlyga: naujas, Gamybos metai: 2018, NEW MACHINE at a special price Tactile Coordinate Measuring Machine by Innometrik Measuring range: 1200 x 3000 x 1000 mm Maximum workpiece weight: 1000 kg Accuracy MPEE: 2.2 + L / 350 (in µm) Scale resolution: 0.1 / 0.5 in µm - Air bearings on all axes Linear speed: 300 mm/s Volumetric speed: 520 mm/s Probe system: Renishaw TP200 incl. 3 modules (SF, HF, LF) and triple probe changer Software: OptiCheck 4.5 & Virtual DMIS (separate partitions); alternatively Polyworks according to customer requirements -Includes PC (Windows 7), alternatively Windows 10 -Includes 2 monitors -Includes mouse/keyboard Nodpfodyl H Nsx Af Iocl Picture: Sister machine

Gamybos metai: 1999, Sąlyga: labai geros būklės (naudotas), Control: CNC-controlled and manual operation PC P 2000 MMX-PCI Desktop ATX 15" color display, keyboard CNC-Turbo surface roughness for WINDOWS Ncodpfelxyp Hex Af Iel TECHNICAL DATA Hard stone inspection plate (DIN 876) Length x Width: 1200 x 500 mm Accuracy grade: Grade 2 Flatness: 16.6 μm Weight: 250 kg Linear drive unit Waveline 60 Basic Measuring stroke: 60 mm Resolution: 0.014 μm Measuring column Wavelift 400 CNC Travel range: 400 mm Positioning repeatability: < 10 μm Machine dimensions (W x D x H): 1.8 x 0.8 x 2.2 m Weight: 600 kg EQUIPMENT / ACCESSORIES - Full enclosure with electrically operated roller shutters - Hard stone plate 1200 x 500 mm - ISEL feed axis with ball screw - Workpiece mounting plate - Linear drive unit Waveline 20/60 - Measuring column Wavelift 400 CNC - Tilting unit KEG 60 on the measuring column, manual for Waveline - Installation kit for surface roughness measurement - Installation kit for contour measurement - Various probes and holders for roughness and contour measurements - Instrument table - Emergency stop button on the instrument table - Calibration kit - Support prisms - Maintenance unit for compressed air preparation - Air damping elements for hard stone plate support - Documentation

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1998, Funkcionalumas: visiškai funkcionalus, matavimo diapazonas X ašis: 500 mm, matavimo diapazonas Y ašis: 700 mm, matavimo diapazonas Z ašis: 400 mm, Įranga: Tipinė plokštelė prieinama, Mitutoyo EURO M 574 koordinatinis matavimo įrenginys labai geros būklės, parduodamas be kompiuterio ir programinės įrangos. Pagaminimo metai: 1999 Be PC!!! Nedpfx Afou E Uzxe Iscl X ašis: 500 mm Y ašis: 700 mm Z ašis: 400 mm Skiriamoji geba: 0,0005 mm Matavimo stalo medžiaga: granitas Renishaw MH 20i matavimo galvutė Granito pagrindo dydis: 850 mm x 1160 mm Ilgio standartas: didelio tikslumo linijinis koduotuvas Centravimo mikroskopas: Mitutoyo CF-10 Fiksavimas ir preciziškas reguliavimas: kiekvienai ašiai - „One-Touch“ oro užraktas, nuolatinis preciziškas reguliavimas per visą ašies eigą. Naudingoji zona: 680 x 1160 mm Rušinio tvirtinimas: sriegis M8 x 1,25 Rušinys: Atstumas tarp kolonų: 720 mm Didžiausias aukštis: 480 mm Didžiausias svoris: 160 kg Be PC Ilgio matavimo neapibrėžtis pagal ISO 10360 E = [3,5 + 4,0L/1000] µm Temperatūros diapazonas: nuo 18 iki 22 °C Įrenginio svoris: 450/540 kg

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2003, Ratlankio diametras - maks. 600 mm Nsdpfx Aowyxycjf Iecl Ratlankio plotis 700 mm Modulis - maks. 20 Modulis - min. 0,5 Stalo diametras 300 mm X eiga 300 mm Y eiga 600 mm Z eiga 700 mm Ruoinio svoris 300 kg Valdymas Zeiss Ruoinio diametras - maks. 600 mm Sutvirtinimo ilgis 20 - 1000 mm Nuolydžio kampas - maks. 90° Bendras galios poreikis 2 kW Staklių svoris apie 2,5 t Užimama erdvė apie 3,0 x 2,0 x 2,4 m Formos matavimo mašina, krumpliaračių matavimo mašina, koordinatinio matavimo mašina --> Primar MX 4 WL Tinka pavarų velenams, žvaigždutės velenams, krumpliaračiams, stūmokliams, pavarų dėžės korpusams, švaistikliams, kumšteliniams ir alkūniniams velenams, alkūninio veleno korpusams, cilindrų galvutėms, ... Oro amortizacija, centrinis ir pasvirusis stalas, atatramos, itin tiksli konstrukcija! Programinė įranga: krumpliaračiai, krumpliaratiniai frezai, stūmokliai, kūginiai krumpliaračiai, alkūniniai velenai, kūginiai įvorės, varantieji kūginiai krumpliaračiai, švaistikliai, ... Naujas programinės įrangos atnaujinimas 2014!

Gamybos metai: 2000, Sąlyga: naudotas, x-travel 1000 mm y-travel 1600 mm z-travel 800 mm Control: WENZEL WPC 2040/FW31.351 Total power requirement: kW (not specified) Machine weight approx. 5500 kg Space requirement approx.: m (not specified) WENZEL CNC-controlled vertical 3-D coordinate measuring machine Model: LH 108 CNC Year of manufacture: 2000, but continuously serviced and calibrated by manufacturer Axis configuration: - Y-axis as long-travel measuring bridge: 1,600 mm - X-axis as measuring head carriage (cross travel): 1,000 mm - Z-axis as vertical measuring quill: approx. 800 mm Maximum workpiece weight / table load: approx. 2,250 kg Clearance under measuring bridge: approx. 900/1000 mm Overall table size: approx. 2,600 x 1,250 mm Table height above floor: approx. 700 mm Njdpfx Aet Hw Nyof Ijcl Table plate thickness: 380 mm Machine height: approx. 3,100 mm Weight: approx. 5,500 kg Special Features / Accessories: • Measuring table, crossbeam, and quill made from dark natural hard stone; table with 6 x 9 threaded holes for workpiece/fixture clamping • All axes are air-bearing for smooth, virtually wear-free operation; equipped with incremental scales, 0.0005 mm resolution • WENZEL CNC control type WPC 2040 / FW31.351 built into worktable (controller replaced approx. 3 years ago) • WENZEL measurement software METROSOFT QUARTIS R 12 SP 1 with SurfPro package and QUARTIS Q-DAS • RENISHAW motorized rotary and swivel head (automatically indexable in 7.5° increments), probe head model PH 10 M plus, with TP 20 probe and various probe accessories • RENISHAW probe head controller unit type PHC 10 C-3 plus, also built into the worktable • Automatic probe changer, 6-position probe magazine model MCR 20 mounted on the table • Mobile hand control panel with progressive control lever (joystick) for manual adjustment of all 3 axes with infinitely variable travel speeds • Sphere standards for table setup, work table, various clamping devices, etc. Condition: Very good – generally in stock, powered for inspection. Ready for demonstration. Disassembled by a CMM specialist at the seller and reassembled here. Delivery: Ex-stock – as is, as inspected Payment: strictly net – upon receipt of invoice.