Klimato spinta 335 litrai

Weiss WK-340/70 -70 °C bis +180 °C

Sąlyga: labai geros būklės (naudotas), Type: WK3-340/70 Weiss Climate Test Chamber, Water Cooled Control Unit: "Touch Panel" All control and operating commands can be executed on the control unit via simple touch of the function symbols. Adjustable Feet To compensate for floor unevenness and ensure adequate ventilation of the machine section, the test chamber is equipped with adjustable feet. Feedthroughs The test chamber features feedthroughs on both the right and left sides. These allow measuring cables and test devices to be routed into the test chamber interior. Feedthroughs included in standard equipment: R1: nominal width 125 mm L1: nominal width 85 mm Volume: 335 liters Test Chamber Dimensions: Internal dimensions: Height 750 mm, Width 580 mm, Depth 765 mm External dimensions: Height 1775 mm, Width 870 mm, Depth 1600 mm Specifications for Temperature Tests: Minimum temperature: –72°C Maximum temperature: +180°C Temporal temperature deviation: ± 0.1 to ± 0.5 K Spatial temperature uniformity: ± 0.5 to ± 1.5 K Temperature change rate, cooling: 3 K/min Temperature change rate, heating: 3 K/min Specifications for Climatic Tests: Temperature range: +10°C to +95°C Dew point range: -3°C to +94°C Humidity range: 10 to 98% r.h. Temporal temperature deviation: ± 0.1 to ± 0.3 K Nlodpfx Adjxmg Sdsuei Spatial temperature uniformity: ± 0.5 to ± 1 K Temporal humidity deviation: ± 1 to ± 3% r.h. Operating Data: Test chamber illumination: Halogen bulb 2 x 24V, 50W Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated current: 16 A; Rated power: 4.9 kW Customer-side fuse: 16 A slow-blow Refrigerant: R-452A/R23 Weight: approx. 585 kg Important safety information for buyers: The following steps are carried out on each of our chambers prior to sale: 1. Functional inspection and replacement of necessary components 2. New filling with legally compliant refrigerant if required 3. Leak test with certificate 4. After successful inspection, each chamber undergoes a documented trial run. Condition: Used Scope of delivery: (see picture) (Specifications and technical data subject to change and errors!) If you have any further questions, we will be happy to answer them by phone.

Sąlyga: visiškai atnaujintas (naudotas),

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1997, Grinding diameter: 80 - 250 mm Grinding length: 600 mm Centre height: 175 mm Longitudinal travel: 750 mm Workpiece speeds: 6 - 600 rpm Grinding spindle speed: 1,500 - 3,600 rpm Cross travel – automatic and manual: 320 mm Control: Kelco 80 Total power requirement: kW Machine weight approx.: 4.4 t Space required approx.: 3.1 x 2.1 x 2.0 m Nlsdpeu D I Tlefx Aduji

Sąlyga: naujas, Mėsos malūnėlis S32F Unger sistema 5 įrankiai Gamintojas: Sind Modelis: S32F Matmenys: 600x550x1000 mm Elektros galia: 1,5 kW Talpa: 500 kg/val Nljdsp R Sdwspfx Aduei

Sąlyga: naujas, Gamybos metai: 2025, skyCUBE M Laser Processing Center – The new benchmark in laser material processing! PFEIFER Laser Processing Center skyCube M Laser machine with 200W CO2 laser Immediately available Mclass = Working area X 1250 x Y 650 x Z 300 mm skyCUBE M Laser Processing Center – the new Mclass multifunctional laser engraving and cutting machine. Easy and high-precision laser processing – High-speed, high-quality laser engraving and cutting. Our newest and most advanced multi-functional solution impresses even the most experienced users with its completely redesigned construction. This CO2/Fiber laser demonstrates outstanding performance in all industrial applications, whether used as a CO2 or Fiber engraving laser or as a CO2 or Fiber cutting laser. With optional laser power up to 1000W (1kW), this CO2 laser device/fiber laser system offers maximum flexibility for your production requirements. Nodpfs Sfansx Aduoli skyCUBE laser devices comply with all Class 1 requirements according to DIN EN 60825-1, ensuring the highest safety standards. Depending on the installed and selected laser power, this CO2/Fiber laser is ideal for cutting and engraving a wide range of materials, including various metals, acrylic, solid wood & engineered wood, composite woods, paper, cardboard, various plastics & foams, textiles, and much more. The excellent build quality of these laser machines – 100% manufactured in Plauen – ensures a high degree of working precision and consistently high quality from the metal frame down to the laser source. With cutting speeds of up to 8000 mm/s and engraving speeds up to 4000 mm/s, the advanced laser technology produces clean, sharp cut edges and precise laser engravings. Its ergonomic design, featuring a pull-out worktable, makes loading and unloading the machine easy. A drawer in the lower part of the machine collects cut materials for convenient handling. User-friendly and intuitive – supplied with the skyCUBE PC software (ready for Windows®). The simple, practical interface, tailored for Windows standards, ensures efficient operation. High system stability, professional monitoring with machine operation and control, and compatibility with standard file formats are some of the software’s key features. Data output is handled via layers – with separate configurations for each layer, including sequence definition and processing type. Parameters like laser power and processing speed are automatically saved for each layer and are reproducible at any time via a material database. Laser projects are transferred to the skyCUBE M laser processing center via a LAN/USB connected PC and can then be repeatedly executed without the PC needing to remain switched on. A modern touch control panel provides full access to all system information and functions. Summary of the skyCUBE M Laser Processing Center: - Industrial-grade German steel machine construction for stable and vibration-free installation of laser components and axis systems, equipped with industrial leveling feet on rollers - 8" touchscreen display – more visibility, more control, and better communication with the skyCUBE M Laser Processing Center - Redundant safety system – Class 1 laser

Gamybos metai: 2022, Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, We are offering for sale an Instron tensile and compression testing machine in excellent condition. Instron 34TM-50 tabletop model with 3 load cells and a wide range of accessories (see photos) Configuration: E1-F1-G1 50kN Year of manufacture: 2022 Weight: 151 kg Load cell: 50kN 2530-50kN/165541 Load cell: 5kN 2530-5kN/166885 Load cell: 500N 2530-500N/164475 Software on USB stick: Bluehill Universal Version 4.29.29784 Software also installed on PC Last service and calibration: August 2024 Next service and calibration: August 2026 The 3400 Series universal testing machines cover a test force range from 500 N to 300 kN. Featuring Instron's patented operator protection architecture, the 3400 Series testing machines are easier to use, smarter, and safer than ever before. The testing systems are ideal for performing tensile, compression, bending, peel, puncture, friction, shear, and many other tests, and can be used with a wide variety of grips and fixtures from our extensive accessory catalogue. Overall height: 1604 mm Maximum vertical test space (test daylight - base to underside of crosshead): 1198 mm Test types: Tensile, compression, and through zero operation Basic control mode: Displacement control Capacity – kN (lbf): 50 (11240) Maximum speed – mm/min (in/min): 508 (20) Minimum speed – mm/min (in/min): 0.05 (0.002) Max. force at max. speed – kN (lbf): 25 (5620) Maximum speed at maximum force – mm/min (in/min): 254 (10) Nlsdpewz Iktofx Adusi Return speed – mm/min (in/min): 508 (20) Crosshead speed accuracy: ± 0.2% of set speed at constant rate, no load Position (crosshead) display accuracy: No load, ±0.02 mm (0.0008 in) or ± 0.10% of indicated value, whichever is greater Position (crosshead) repeatability – mm (in): ± 0.015 (0.0006) Load measurement accuracy: ± 0.5% of reading down to 1/200 of the load cell's rated capacity Strain measurement accuracy: ± 0.5% of indication down to 2% of full scale with extensometer meeting ASTM E83 Class B or ISO 9513 Class 0.5 Financing or leasing options for the offered item are available upon request!

Sąlyga: naudotas, Gamybos metai: 2000, Table length: 1160 mm Table width: 710 mm Clearance: 650 mm Control: WENZEL ME 5007 Total power requirement: kW Machine weight approx.: 800 kg Space requirements approx.: m W E N Z E L CNC-controlled vertical 3D coordinate measuring machine Model: LH 54 CNC, Year of manufacture: 2000 Regularly maintained and calibrated by the manufacturer _____ Y-axis configured as a longitudinally movable measuring portal: 600 mm X-axis as a transverse measuring head carriage: 500 mm Z-axis as a vertical measuring spindle approx.: 400 mm Max. workpiece weight / table load approx.: 200 kg Clearance under the measuring portal approx.: 650 mm Nlsdpfx Ajt Hw S Ioduji Usable table size approx.: 1,160 x 710 x 160 mm Table height above floor approx.: 850 mm Machine height approx.: 2,300 mm Weight approx.: 800 kg Special features / Accessories: • Machine delivered with increased accuracy • Measuring table, traverse, and spindle made of dark natural granite; table with 3 x 4 threaded holes for attaching workpieces/fixtures • All axes are air-bearing, providing smooth operation and virtually wear-free mechanics, equipped with incremental scales with 0.0005 mm resolution • WENZEL CNC Control Type ME 5007 for 3 to 6 axes with ME 4700 movable hand control console with 2 joysticks for accessing all software functions. Ideally equipped for: • WENZEL measuring software METROLOG–II Level 2 for standard geometry measurements, 3D graphical workpiece representation, graphic reports, etc. Including keyboard • RENISHAW control unit Model PHC 10–2 suitable for • RENISHAW motorized rotary and swivel head (automatically indexable in 7.5° steps) Model PH 10 T with 5-way probe system Model TP 200 and various probe accessories, incl. RENISHAW Probe Interface PI 200 • Automatic probe change possible, 6-position probe magazine Model SCR 200 mounted on the table • Reference sphere for table setup, work table with console, various clamping devices • Various cassettes and CDs with various software. Separate PC for measuring software, printer Condition: Very good – generally in stock under power, available for inspection and demonstration. Dismantled by a specialist and reassembled here. Delivery: ex stock – as is, as inspected Payment: Net – upon receipt of invoice.

Sąlyga: labai geros būklės (naudotas), Weiss Type: WKL 34/60 Weiss climatic chamber, air-cooled Refrigerant converted to R-452A -60°C to 150°C Chamber volume: 34 liters Feed-throughs in standard configuration installed: R1 NW 50 mm L1 NW 120 mm Internal dimensions: Height 310 mm x Width 324 mm x Depth 300 mm External dimensions: Height 1740 mm x Width 630 mm x Depth 970 mm Specifications for temperature tests: Temperature range: -60 to +150 °C Temperature deviations under steady-state conditions (according to IEC 60068-3-5): Temporal fluctuation at center of workspace: ± 0.3 to ± 1 K / ± 1 to ± 2 K Spatial deviation (temperature gradient): 2 to 4 Temperature change rate (per IEC 60068-3-5): Heating: 2.5 K/min Cooling: 3 K/min Maximum heat compensation: 550 W Specifications for climatic tests: Temperature range: +10 to +95 °C Humidity range: 10 to 98 % r.h. Temperature and humidity deviations (steady-state, per IEC 60068-3-5): Temporal temperature fluctuation at center of workspace: ± 0.3 to ± 0.5 K Nlodpfxotr Dins Aduoi Spatial temperature deviation: ± 0.5 to ± 1.5 (temperature gradient): 1 to 3 Temporal humidity fluctuation at center of workspace: ± 3 to ± 5 % r.H. Operational data: Test chamber illumination: Halogen bulb 12V, 20W Rated voltage: 1/N / PE AC 230 V ± 10% 50 Hz Rated power: 2.5 kW Rated current: 11 A Protection (on-site): 16A slow-blow Heat emission (air-cooled chamber): Maximum heat emission to ambient: 1700 W Refrigerant: R-452A / R23 Weight: 140 kg Important safety information for the buyer! The following points will be completed on our offered chambers prior to delivery: 1. Functional check and replacement of necessary components 2. If required, new filling with legally compliant refrigerant 3. Leak test with certificate 4. Upon successful completion, the chamber undergoes a documented test run. Condition: used Scope of delivery: (see picture) (Technical data subject to change and error!) We are happy to answer further questions by phone.

Sąlyga: naujas, Slėgis: 17,0 kN Eiga: 40 mm Iškyša: 110 mm Darbinis aukštis nuo iki: 70–220 mm Stalo matmenys: 190 x 140 mm Veleno skersmuo: 30 mm Mašinos svoris: apie 60 kg Matmenys (I x P x A): 310 x 190 mm Svirtinės pneumatinės presės Nljdpfxofv Avvo Aduji Su darbo aukščio preciziniu reguliavimu per kampinę pavarą su šonine rankenėle – patogu ir paprasta reguliuoti. Svirtinės pneumatinės presės naudojamos, kai maksimalios spaudimo jėgos reikia pačioje eigos pabaigoje, pvz., montuojant, štampuojant, presuojant, kniedijant ir pan.

Sąlyga: naujas, Pressure: 34.0 kN Stroke: 40 mm Throat depth: 130 mm Working height: from 80 to 240 mm Table size: 190 x 140 mm Spindle diameter: 30 mm Machine weight: approx. 80 kg Dimensions (L x W x H): 375 x 200 mm Toggle lever pneumatic presses including fine adjustment of the working height via bevel gear with lateral crank — convenient and easy to adjust. Toggle lever pneumatic presses are used when the maximum pressing force is required shortly before the end of the stroke, e.g., for assembly, punching, embossing, riveting, etc. Nodpfx Adefv Avyouoli