Praeinamas, 5 m³ talpa

Weiss Technik Klima-Prüfkammer WK 5/55-120 -55°C bis +120°C

Būklė: labai geros būklės (naudotas), Weiss Type: WKL 34/60 Weiss climatic chamber, air-cooled Refrigerant converted to R-452A -60°C to 150°C Chamber volume: 34 liters Feed-throughs in standard configuration installed: R1 NW 50 mm L1 NW 120 mm Internal dimensions: Height 310 mm x Width 324 mm x Depth 300 mm External dimensions: Height 1740 mm x Width 630 mm x Depth 970 mm Specifications for temperature tests: Temperature range: -60 to +150 °C Temperature deviations under steady-state conditions (according to IEC 60068-3-5): Temporal fluctuation at center of workspace: ± 0.3 to ± 1 K / ± 1 to ± 2 K Spatial deviation (temperature gradient): 2 to 4 Temperature change rate (per IEC 60068-3-5): Heating: 2.5 K/min Cooling: 3 K/min Maximum heat compensation: 550 W Specifications for climatic tests: Temperature range: +10 to +95 °C Humidity range: 10 to 98 % r.h. Temperature and humidity deviations (steady-state, per IEC 60068-3-5): Temporal temperature fluctuation at center of workspace: ± 0.3 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 (temperature gradient): 1 to 3 Temporal humidity fluctuation at center of workspace: ± 3 to ± 5 % r.H. Operational data: Test chamber illumination: Halogen bulb 12V, 20W Rated voltage: 1/N / PE AC 230 V ± 10% 50 Hz Rated power: 2.5 kW Rated current: 11 A Protection (on-site): 16A slow-blow Heat emission (air-cooled chamber): Maximum heat emission to ambient: 1700 W Gjdpfetr Dinex Acyoip Refrigerant: R-452A / R23 Weight: 140 kg Important safety information for the buyer! The following points will be completed on our offered chambers prior to delivery: 1. Functional check and replacement of necessary components 2. If required, new filling with legally compliant refrigerant 3. Leak test with certificate 4. Upon successful completion, the chamber undergoes a documented test run. Condition: used Scope of delivery: (see picture) (Technical data subject to change and error!) We are happy to answer further questions by phone.

Būklė: naudotas, GOM - ATOS III Rev.02.1 - 3D matavimo prietaisas Būklė: naudotas, labai gera. Techniniai duomenys: Kamerų sistema: 2 x 8.000.000 Kameros pikseliai: 2048 x 2048 pikselių (apie 4 megapikselius) Matavimo lauko dydžiai XYZ: nuo 150 x 150 x 100 mm iki 2000 x 2000 x 2000 mm Matavimo taškų atstumas: nuo 0,075 mm iki 1,0 mm Skenavimo laikas: apie 2 sekundes Gsdpfx Acexr Umgoyjip Matavimo tūris: 700 (įskaitant kalibravimo plokštę) Mėlynos šviesos technologija: tikslūs matavimai nepriklausomai nuo aplinkos apšvietimo. Komplekte: kompiuterinė technika ir USB raktas Programinės įrangos versija 2023 Pridedama Tritop sistema (kamera, 2x 1m liniuotės, licencija) Viskas originaliuose lagaminuose Su stovu, kompiuteriu, stovu, ekranu, smulkiais įrankiais, nuorodos taškais, 1x zondas Prijunkite ir dirbkite iš karto…

Būklė: labai geros būklės (naudotas), Feutron Model: 3702/06 Water-cooled Climate Test Chamber Technical Data: Nominal test chamber volume: 2.0 m³ Dimensions: Test chamber exterior, including humidification console Width: 2970 mm, Height: 2370 mm, Depth: 1530 mm Rear wall Minimum installation opening: Width 2970 mm, Height 2390 mm, Depth 1550 mm Test chamber internal dimensions: Width 2000 mm, Height 1000 mm, Depth 1000 mm Door: Double-leaf, clear opening width: 2000 mm, height: 1000 mm Viewing windows (heated), 2 pieces, width: 500 mm, height: 600 mm Cable port, 1 piece, left side wall, diameter 75 mm Temperature range: -40...100°C Climate range: 10...95°C Temperature variation over time: ≤ ±0.5...±1.0 ΔN/K Change rates measured in supply air without load: Cooling: up to 2.0 average K/min Heating: up to 2.0 average K/min Humidity range: 10...95 % relative humidity Humidity variation over time: ≤ ±3.0 % r.H. Dew point range, temporarily: -5...95°C Cooling unit: water-cooled semi-hermetic Bitzer system Refrigerant: R507 (M-K1) Climate and dryer refrigeration unit: air-cooled / hermetic system Refrigerant: R134a (M.KK) Power Supply: Electrical connection: 400V 3/N/PE AC, 50Hz Plug: CEE 5-pin, 32A, with 5.0 m cable Max. simultaneous power requirement: 10.0 kW Circuit breaker: 3 x 25 A, type C Protection class: IP20 Godpfxsk E Hnqe Acyeip Weight: 1300 kg Condition: used Scope of delivery: (see picture) (Modifications and errors in the technical data and specifications excepted!) For further questions, feel free to contact us by phone.

Būklė: labai geros būklės (naudotas), Vötsch Type: VCL 7003 Climate Test Chamber, Air-Cooled Test Chamber Volume: approx. 34 liters Specifications for Temperature Testing: Gijdpfx Aev Tnd Sjcyjp Temperature Range: -70 to +180°C Temporal Temperature Deviation: ±0.3 to ±1.0 K Spatial Temperature Uniformity: ±0.5 to ±2.0 K Rate of Temperature Increase: 4.0 K/min Rate of Temperature Decrease: 3.0 K/min Maximum Heat Compensation: 550 W Temperature Calibration Points: +23°C and +80°C Specifications for Climatic Testing: Temperature Range: +10 to +95°C Humidity Range: 10 to 98% Temporal Humidity Deviation: ±1 to ±3% Temporal Temperature Deviation: ±0.3 to ±0.5 K Spatial Temperature Uniformity: ±0.5 to ±1.5 K Climatic Calibration Points: +23°C / 50% RH and +95°C / 50% RH Internal Chamber Dimensions (W x D x H): 350 mm x 300 mm x 310 mm External Dimensions (W x D x H): 640 mm x 750 mm x 1730 mm Electrical Connection: 1/N/PE AC 230 V ±10%, 50 Hz Rated Current: 11.0 A Maximum Rated Power: 2.5 kW Sound Pressure Level: 59 dB(A) Refrigerants: R-404A / R23 Weight: approx. 130 kg For your peace of mind as a buyer, please note the following: The following procedures are carried out in advance on all chambers offered: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certification 4. After successful testing, the chambers undergo a documented trial run. Condition: used Scope of delivery: (See images) (Subject to technical modifications and errors. All information without guarantee!) If you have any further questions, please feel free to contact us by phone.

Būklė: labai geros būklės (naudotas), Here we offer a Feutron climate test chamber. Feutron Climate Test Chamber Giedpfeklv H Iox Acyop Temperature - Temperature range: -40...90°C - Climate range (without heat load): 10...85°C - Temporal temperature deviation during temperature operation: ≤ ± 0.5 K/min - Temporal temperature deviation during climate operation: ± 1.0... ± 1.5 K/min Change rates - Heating: 2.0 K/min on average - Cooling: 2.0 K/min on average IEC 1646 standard testing is possible, including modules with a maximum weight of 160kg and non-linear ramps (setpoint jump). Drying - Air drying: condensation drying Humidity - Air humidification: steam humidification - Humidity range: 10...95% relative humidity - Temporal humidity deviation: ≤ ± 3.0... ± 5.0 % r.h. - Dew point range: 8...80.9°C Test chamber - Interior volume: 7.0 m³ - Interior dimensions: 1500 mm (W) x 2250 mm (H) x 2000 mm (D) - Hinged door DIN right, heated, with glass insert: 900 mm (W) x 2100 mm (H) - Viewing window, heated, with blackout panel and lockable: 500 mm (W) x 600 mm (H) - 2 feedthroughs in right front panel, Ø 75 mm Irradiation unit test chamber - 4 cutouts in left side wall for SC 2500, each 850 x 700 mm - Irradiated area when using SC 2500: 1200 x 1200 mm - Radiation intensity at 1.0m wall distance: 1000 ± 10% W/m² - Lighting: 1x 200W halogen lamp Refrigeration unit - Bitzer semi-hermetic 2-stage compressor, air-cooled - Condenser: Split design (outdoor installation, winter control) - Refrigerants: R507 / R23 Temperature control system - Cooling brine medium: Tyfocor / water - Mixing ratio: 50/50% - Cooling brine density: 1.072 kg/dm³ - Fill quantity: approx. 80 dm³ Pyranometer - Temperature range: -40...150°C - Max. radiation absorption: 4000 W/m² - Spectral range (50% points): 305...2800 nm - Sensitivity (nominal): 7 µV/W/m² Test chamber power supply - Electrical connection: 400V, 3/N/PE, AC, 50Hz - Connection type: fixed connection - Max. simultaneous power requirement: approx. 32.0 kW - Supply line fuse: 3 x 63A, Type C SolarConstant power supply - Electrical connection: 400V, 3/N/PE, AC, 50Hz - Connection type: fixed connection - Max. simultaneous power requirement: approx. 30.0 kW - Supply line fuse: 3 x 63A, Type C External dimensions of the test chamber complete with: Equipment room / control cabinet and control cabinet for SolarConstant 2500 - Equipment room external dimensions: 3440 mm (W) x 2580 mm (H) x 2950 mm (D) - Control cabinet: 2200 mm (W) x 1830 mm (H) x 1100 mm (D) - Split condenser external dimensions: 900 mm (W) x 950 mm (H) x 2000 mm (D) Total weight test chamber: approx. 2700 kg Condenser weight (empty): 153 kg Weight: 2700 kg Type: 3707/06 Condition: used Scope of delivery: (See picture) (Specifications subject to change and errors reserved!) We are happy to answer further questions by phone.

Būklė: labai geros būklės (naudotas), CTS CW-60/11 – Climatic Test Chamber, Water-Cooled The CW-60/6 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber designed for conducting temperature and humidity tests on multiple test specimens simultaneously. Device Description This climatic test chamber enables functional and material property testing of specimens under controlled temperature and humidity conditions. Efficient air circulation with a correspondingly high recirculated air volume ensures optimal transfer of climate to the test specimen. The air handling unit is located at the rear of the internal chamber. The refrigeration and conditioning units are housed in a separate frame behind the chamber and are easily accessible. The control system is installed in a separate switch cabinet, with the operator interface integrated into the cabinet door. Gijdex Anipspfx Acyjp For dehumidification, the test chamber is equipped with a self-regenerating compressed air dryer. The chamber can also be purged with fresh air via a blower. Technical Performance Data: Temperature Testing: Temperature range: –60 °C to +90 °C Temperature deviation (over time): ±0.5 to 1 K Temperature deviation (spatial, at 200 mm from wall): ±1 K Temperature change rate (supply air, linear): Heating: 2 K/min from –40 °C to +85 °C Cooling: 2 K/min from +85 °C to –40 °C Climatic Testing: Temperature range: +10 °C to +95 °C Humidity range: 10 % to 95 % r.h. Dew point range: +5 °C to +89 °C Temperature deviation (over time): ±0.5 K Humidity deviation (over time): ±2 – ±5 % r.h. *All specifications without radiant heat, measured in steady-state condition. Data valid for ambient temperature of +25 °C, nominal voltage 400 V, without test material, without irradiation, and without additional equipment. Dimensions: Internal chamber (usable test area): Volume: approx. 11,000 liters (11 m³) Approx. internal dimensions: Width: 2,100 mm, Depth: 2,530 mm, Height: 2,200 mm (may vary slightly depending on configuration) External dimensions: Width: 2,700 mm, Depth: 5,200 mm, Height: 2,520 mm (dependent on doors, frame, accessories, etc.) Operating Data: Nominal power: 84.4 kW Nominal voltage: 400 V 3/N 50 Hz Nominal current: 131.4 A Technical Specification: Refrigeration unit: Water-cooled, low noise, semi-hermetic, infinitely variable output control via electronic monitoring and control system, environmentally friendly refrigerants R 23 / R 404 A Weight: 6,000 kg Notes: Viewing possible by appointment (46325 Borken) Shipping possible via carrier – costs and arrangement upon request Scope of delivery: (see image) Specifications subject to change and possible error. For further questions, we are happy to assist you by phone.

Būklė: labai geros būklės (naudotas), Weiss Technik TS 60 Thermal Shock Test Chamber / 60 L, –71…+220 °C Water-cooled Product Description: For sale is a Weiss Technik TS 60 Thermal Shock Test Chamber. The chamber is perfectly suited for rapid temperature change tests (e.g. according to IEC, MIL-STD, JEDEC) and has been well maintained. Volume & Internal Dimensions: Test volume: 60 liters Internal basket/test area dimensions (W × D × H): approx. 380 × 430 × 370 mm External dimensions (W × D × H): 895 × 1970 × 1895 mm Temperature Ranges & Changeover Hot chamber: +50 °C to +220 °C Cold chamber: –72 °C to +70 °C Transfer time (basket between zones): < 10 seconds Heating rate up to 17 °C/min Cooling rate up to 3.7 °C/min In single mode (cold zone only), heating rate: approx. 3.2 °C/min Temperature Deviation & Uniformity Temporal deviation (temperature control over time): ± 0.3 to ± 1.0 °C Load / Capacity & Lifting System Basket/lifting system capacity: 20 kg maximum load Transfer basket secured by protective mesh on all sides Additional Features & Equipment Noise level: approx. 58 dB(A) in operation Control: Touchscreen, RS-232 / USB / Ethernet interfaces Electrical Connection: 3/N/PE AC 400 V ±10% 50 Hz Gsdpfxexr A R To Acyeip Rated power approx. 8.5 kW Rated current approx. 25 A Recommended fuse 32 A Refrigerants: R-404A / R-23 Weight: 800 kg Buyer Safety Information: For your safety as a buyer, the following points are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. Renewal of refrigerant with legally compliant media if necessary 3. Leak test with certificate 4. Upon successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to change and errors in technical data, specifications reserved!) We will be happy to answer further questions by phone.