Formier

Weinig Unimat 500

Sąlyga: naudotas, Gamybos metai: 2006, Dimensions (L x W x H): 217 x 460 x 183 cm Price: On request - Year of manufacture: 2006 - Documentation available: No - CE marking present: Yes - CE certificate available: No - Serial number: 107402 - Number of spindles [pcs]: 4 Nodpfxownig Ns Af Iscl - Spindle 1: - Spindle diameter [mm]: 40 - Spindle 2: - Spindle diameter [mm]: 40 - Spindle 3: - Spindle diameter [mm]: 40 - Spindle 4: - Spindle diameter [mm]: 40 - Infeed table length [mm]: 1780 - Feed motor [kW]: 5.2 - Suction nozzle diameter [mm]: 140 - Voltage [V]: 400 - Transport dimensions: 2170mm x 4600mm x 1830mm (l x w x h) - Transport packages [pcs]: 1 Financial Information VAT: The stated price is exclusive of VAT VAT/margin scheme: VAT deductible for businesses Delivery and trade-in possible at any time for all items from the industrial sector Yorick Diebels

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Dėl veiklos nutraukimo Norderstedt padalinyje, parduodama iš vietos, neiškrauta. Kugler Paternoster štampavimo mašina, tinkama Wire-O ir indeksams Formatas 50 x 50 cm Įskaitant 2 štampavimo įrankius Ncodpfxsrn R Rfo Af Iel Paskutinis kainos sumažinimas!!!

Sąlyga: naudotas, Gamybos metai: 2006, Dimensions (L x W x H): 190 x 421 x 183 cm Price: On request - Year of manufacture: 2006 - Documentation available: No - CE marking present: Yes - CE certificate available: No - Serial number: 107707 - Number of spindles [pcs]: 5 - Spindle 1: - Motor power [kW]: 5.5 - Spindle 2: - Motor power [kW]: 7.5 - Spindle 3: - Motor power [kW]: 7.5 - Spindle 4: - Motor power [kW]: 7.5 - Spindle 5: - Motor power [kW]: 7.5 - Infeed table length [mm]: 1800 - Feed motor [kW]: 3 - Feed drive: Cardan drive - Voltage [V]: 400 - Power consumption [A]: 78 - Fuse [A]: 80 - Total power [kW]: 36.0 - Transport dimensions: 1900mm x 4210mm x 1830mm (L x W x H) Financial Information: VAT: The indicated price is exclusive of VAT Nedswng Rfspfx Af Ijcl VAT/Differential taxation: VAT deductible for businesses Delivery and trade-in possible at any time for all industrial equipment Yorick Diebels

Sąlyga: naudotas, Hobliavimo ir profiliavimo automatas Weinig Unimat 500, skirtas keturpusiam medienos obliavimui ir profiliavimui. Įrenginys turi atminties sistemą su elektroniniu 2–5 ašių špindelių (ašiniu ir radialiniu) pozicionavimu. Su grioveliu stalu, kompaktiška kabina, labai geros originalios būklės. Komplekte: - Peilių galąstuvas Rondamat 931 - Centrolock obliavimo galvutės - Profilinės peilių galvutės - Atsarginiai peiliai - Platus priedų komplektas Špindeliai: 5 Ncsdoya Hh Tspfx Af Iol 1 špindelis: apačioje / 40 mm 2 špindelis: dešinėje / 7,5 kW / 40 mm 3 špindelis: kairėje / bendra variklis su dešiniuoju / 40 mm 4 špindelis: viršuje / 7,5 kW / 40 mm 5 špindelis: apačioje / 40 mm Darbinis plotis: 230 mm Darbinis aukštis: 120 mm Valdymas: Memory System

Sąlyga: naudotas, Number of spindles: 6 units Working width: 230 mm Planing height: 120 mm Planer table length: 2500 mm Feed motor: 3 kW Feed speed: 5–24 m/min Total power requirement: 27 kW Dimensions (L x W x H): 3900 x 2200 x 2000 mm Machine weight approx.: 2500 kg Weinig Four-Side Planer Profimat 23 Window Version with glazing bead cutting unit, alternatively usable as a grooving spindle ATS control and program control ----- Machine is currently being overhauled and function-tested Technical Data Summary (additional accessories, if included, upon request) ----- General Ncedpfju Su Hujx Af Iel ----- > Working width: 230 mm > Working height: 120 mm > Number of spindles: 6 pcs. > Planer table length: 2500 mm > Feed motor: 3 kW > Feed speed: 5–24 m/min > Total power requirement: 27 kW > Dimensions: 3900 x 2200 x 2000 mm > Machine weight, approx.: 2500 kg Spindle Arrangement ----- > Spindle 1: bottom > Spindle 2: right, pneumatically controlled up/down > Spindle 3: left > Spindle 4: top > Spindle 5: bottom > Spindle 6: glazing bead saw, pneumatically controlled up/down Spindle Description ----- > Spindle 1: 4 kW, 6000 rpm, 40 mm diameter > Spindle 2: 7.5 kW, 6000 rpm, 40 mm diameter > Spindle 3: 6000 rpm, 40 mm diameter > Spindle 4: 5.5 kW, 6000 rpm, 40 mm diameter > Spindle 5: 4 kW, 6000 rpm, 40 mm diameter > Spindle 6: glazing bead saw 2.2 kW, 6000 rpm, 40 mm diameter Additional Features ----- > Glazing bead cutting or usable as a grooving unit > ATS control, automatic 2-axis positioning for width and height (left and top spindle) with program memory for 99 programs > Machine operation: window package Combined control of right spindle and glazing bead discharge via manual selector switch on the control panel > Spindles with mechanical digital display Option: Used planer heads available (technical data as per manufacturer – no guarantee!)

Sąlyga: naudotas, Gamybos metai: 2005, Weinig Unimat 500 Moulder Beschreibung: Abmessungen des Einlauftisches: 2.500 mm Anzahl der Achsen: 5 Spindelanordnung: unten-rechts-links-oben-unten Verstellbare Spindel: Nein Hobelbreite: 20 / 230 mm Hobelhöhe: 12 / 120 mm Nedpfsw Ebacsx Af Iscl Vorschubgeschwindigkeit: 24 m/min Nutbett: Nein Weitere Bemerkungen: - (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Die besten Holzbearbeitungsmaschinen aus den Niederlanden

Gamybos metai: 2005, Sąlyga: paruoštas naudoti (naudotas), Šis WEINIG Unimat 500 buvo pagamintas 2005 m. Tai tvirtos medžio apdirbimo staklės, turinčios 230 x 120 mm darbinį diapazoną ir penkis suklius, užtikrinančios efektyvų apdirbimą su kintamu padavimo greičiu nuo 4 iki 30 m/min. Suklių galia - 4 kW įleidžiamojo ir išleidžiamojo sraigtų ir 7,5 kW dešiniojo / kairiojo ir viršutinio sraigtų. Apsvarstykite galimybę įsigyti šias WEINIG "Unimat 500" medžio apdirbimo stakles. Susisiekite su mumis ir gaukite daugiau informacijos apie šias stakles. Papildoma įranga • Apima apie 70 pjovimo galvučių Z4 • Keli šimtai naujų dantytų peilių ruošinių Mašinos privalumai Njdoyaihpepfx Af Ijcl Kokybiškos mašinos privalumai • Griovelių kreipikliai ir hidraulinės veržlės Techninės mašinos privalumai • Darbinis diapazonas (plotis x aukštis): 230 x 120 mm • Velenų skaičius: 5 • Kintamas padavimo greitis: 4–30 m/min • Veleno galia: apačioje (įdėjimas): 4 kw / dešinėje / kairėje: po 7,5 kw / viršuje: 7,5 kw / apačioje (išdėjimas): 4 kw

Sąlyga: naujas, Gamybos metai: 2024, Mitre saw with electronic pusher and controlled axis. Cutting capacity: 55 x 360, 80 x 340, 95 x 325, 125 x 295, 135 x 280 mm Minimum workpiece thickness: 10 mm Work table inclined at 8° Technical specifications of the saw unit: Pneumatic up-cut saw TR500 Motor power: 10 HP (7.5 kW), 400/50 Hz. TCT blade diameter: 500 mm, F=30 Z=144 S=4.6 Cutting cycle time: 4 seconds Technical features of the feed system: PUSH FEED SYSTEM AVAILABLE LEFT AND RIGHT SIDE Feed by rack and pinion system with brushless motor Positioning accuracy: +/- 0.4 mm Powerful infeed motor for bundle weight up to 80 kg Maximum push feed system speed: 90 m/min Pneumatic lift of pusher at the end of the cutting cycle and overhead return. Data input management: 12-inch TOUCH SCREEN controller (800x600 Pixels) USB port Ethernet port LINUX operating system Loading and saving machine parameters via USB port Edit cutting cycle (pattern) and enter directly at the controller Transfer cutting lists created on PC via USB or Ethernet port Operating software: Manual entry of the stock length Partial optimization without measuring the panel length Cutting cycle with 3 optimization options (maximum length, sequence, and board order) 1000 cutting lists with 11 sizes each, or one list with 10,000 consecutive sizes "OPTI" package: automatic board length detection and full optimization. Ncodpohw Ng Ijfx Af Iel Piece length measurement via photocell Cutting cycle: with 6 optimization criteria (longest length, sequence, board order, volume, minimal waste, and priority length) "OPTI PLUS" package: overall optimization with knot and defect removal (OPTION NOT INSTALLED ON THE MACHINE) Technical description: "OPTI PLUS" package: for removal of knots and defects Photocell for reading knots and defects during timber mapping Marking with fluorescent chalks (Note Ð Only available in combination with ZA250) Pneumatic side clamping device

Sąlyga: naudotas, Gamybos metai: 2006, Dimensions (L x W x H): 180 x 358 x 184 cm Price: On request - Year of manufacture: 2006 - Documentation available: No Nsdpfx Aownhpvjf Iocl - CE marking present: Yes - CE certificate available: No - Serial number: 106992 - Number of spindles [pcs]: 4 - Spindle 1: - Motor power [kW]: 5.5 - Spindle diameter [mm]: 30 - Max. planing block diameter [mm]: 130 - Tool available: Yes - Spindle 2: - Motor power [kW]: 7.5 - Spindle 3: - Motor power [kW]: 7.5 - Spindle 4: - Motor power [kW]: 7.5 - Infeed table length [mm]: 1780 - Feed roller diameter [mm]: 130 - Feed motor [kW]: 3 - Feed drive: Cardan drive - Suction nozzle diameter [mm]: 140 - Voltage [V]: 400 - Power consumption [A]: 88 - Fuse [A]: 100 - Power output [kW]: 41.0 - Transport dimensions: 1800mm x 3580mm x 1840mm (l x w x h) - Transport packages [pcs]: 1 Financial information VAT: The listed price is plus VAT VAT/margin scheme: VAT deductible for businesses Delivery and trade-in possible at any time for all industrial equipment Yorick Diebels

Sąlyga: labai geros būklės (naudotas), Four-sided planer Weinig Unimat 500 Working width: 230 mm Working height: 140 mm Number of spindles: 6 Spindle configuration: 1. Bottom 7.5 kW 2. Right 7.5 kW 3. Left 7.5 kW 4. Top 11 kW 5. Top 11 kW 6. Bottom 7.5 kW Total power: 56 kW Feed speed adjustable via inverter Memory system Pneumatic pressure elements divided into 3 sections 4 rows of steel infeed rollers 2 rows of rubber feed rollers 1 table roller driven by cardan shaft Ncedpfxothk T Is Af Iel Infeed table length: 1980 mm Working tables with Marathon Coating technology CE Certificate Extraction ports: 6 x 140 mm Machine dimensions: 394 x 185 x 195 cm (H)

Sąlyga: naujas, Gamybos metai: 2025, New machine Year of manufacture: 2025 Description: Technical Specifications Working width: 630 mm Table dimensions: 640 x 1000 mm Working height: Nsdpfxow Tfybe Af Iocl - Maximum: 300 mm - Minimum: 3.5 mm Max. cutting depth per pass: 8 mm Min. workpiece length: 260 mm Cutterhead diameter: 120 mm 4 knives: 35 x 3 x 640 mm Cutterhead speed: 4500 rpm Feed speed electronically adjustable: 4–20 m/min Feed motor (S6 -40%): 1.3 kW Extraction port diameter: 150 mm Standard Equipment and Accessories - Automatic thickness table lift with 2 speeds and micrometer positioning - Thickness table vertical adjustment via 4 steel threaded spindles - Electronic control with 2 axes for settings: * input value for thickness table * feed speed - Stepless electronic feed speed adjustment from 4 to 20 m/min via inverter - Feed speed adjustment depending on maximum main motor power - Ribbed steel infeed roller on top - Two upper rubber-coated outfeed feed rollers - Interchangeable feed rollers - Independent pneumatic pressure regulation for upper feed rollers - Motor power 9 kW 50Hz (11 kW 60 Hz) with automatic star-delta start: * [S1] 7.5 kW / 10 hp 50 Hz (8.8 kW / 12 hp 60 Hz) * [S6 -40%] 9 kW / 12 hp 50 Hz (11 kW / 15 hp 60 Hz) Safety/Protection - Noise reduction covers at infeed and outfeed - Micro safety switch on guarding cover - Emergency stop button on front and rear of the machine - Lockable main switch - Motor protection switch - Low-voltage control circuit (110 Volt) - Automatic motor brake - EC Declaration of Conformity Production code: S 7 109999 Standard safety regulations 530314 TERSA cutterhead (monoblock design) with disposable reversible knives 083201 Base 930731 Volt 400 EU R02017 L'invincibile S 7 CE version 931201 Frequency 50 Hz 109993 MACHINE LANGUAGE: German Availability: short-term Location: Flörsheim

Sąlyga: naudotas, Gamybos metai: 2005, Price: On request What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines solely based on photos and are reselling them with the information provided in the listing. Unfortunately, we do not have any additional details such as exact dimensions or machine specifications. Furthermore, these machines are often not yet in stock and have not been inspected by us. These machines are offered at attractive prices, meaning the prices are lower than usual, but the risk is entirely borne by the buyer. Please review the information in the listing carefully before making a purchase. Njdpfxox Athde Af Ijcl Feel free to contact us if you have any questions! - Machine available from: 2026-05-18 - Year of manufacture: 2005 - Documentation available: No - CE certificate available: No Financial Information VAT: The stated price is plus VAT VAT/margin scheme: VAT deductible for businesses Delivery and trade-in possible at any time for all types of industrial equipment Yorick Diebels

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Machine description Working width: 230 mm Nsdpfx Asvit Inof Iscl Working height: 130 mm 5 heads + chamfering unit Head arrangement: bottom/right/left/top/bottom Head speed: 6000 rpm Memory system Stepless feed speed adjustment up to 30 m/min Feed via cardan shafts Table lubrication Pneumatic pressure of feed rollers

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Funkcionalumas: visiškai funkcionalus, Year of manufacture: 1997, connected load: 380V 5.2A 2.0kW, saw blade diameter: 350 mm, swivels 45° to both sides, height adjustable via hand crank, cutting length: 600 mm, extraction port: 100 mm, table height: 890 mm, right-hand roller conveyor with stop, cutting length: 3200 mm, left-hand roller conveyor with stop, cutting length: 2200 mm. Nsdpfxowhn T Uo Af Iocl

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, įėjimo įtampa: 400 V, įrankio skersmuo: 140 mm, garantijos trukmė: 3 mėnesiai, veleno skersmuo: 40 mm, ašies skaičius: 5, ištraukimo jungties skersmuo: 140 mm, įėjimo dažnis: 50 Hz, padavimo volo skersmuo: 140 mm, stalo plotis: 230 mm, peilio veleno skersmuo: 40 mm, Įranga: kabina, variklio stabdis, Four-side planer Weinig Unimat 500 Working width: 230 mm Working height: 130 mm Number of spindles: 5 Njdpfx Asv Nkufjf Iocl Spindle configuration: 1. Bottom 7.5 kW 2. Right 3. Left 11 kW 4. Top 7.5 kW 5. Bottom 5.5 kW Powercom system Pneumatic pressure rollers divided into 4 sections Feed speed adjustable via frequency inverter Feed drive via cardan shafts Infeed table length: 1970 mm CE certificate