Pjaustymas liejimo pjūviu

WEINIG UNIMAT 23E

Sąlyga: naudotas, Gamybos metai: 1999, Keturpusė obliavimo staklės Mažoji Unimat 23 E Pagaminimo metai: 1999 Serijos numeris: 88103 Bdsdpfx Agownh Sqo Rok Padavimo greitis: 5/24 m/min Rušinės plotis min./maks.: 20/230 mm Rušinės aukštis min./maks.: 8/160 mm Veleno skersmuo: 40 mm Įvado stalo ilgis: 1950 mm Griovelių stalas 1. apatinis velenas: 5,5 kW 2. ir 3. dešinysis ir kairysis velenai: 11 kW 4. viršutinis velenas: 15 kW 5. viršutinis velenas: 11 kW 6. apatinis velenas: 5,5 kW Bendra galia: 54 kW Iš viso 117 amperų. Saugiklis: 125 amperų. Transportavimo matmenys: 4200x2000x2100 mm (IxPxA), Svoris +/- 4500 kg. - Pagaminimo metai: 1999 - Dokumentacija prieinama: Ne - CE sertifikatas: Nėra - Serijos numeris: 88103 - Velenų kiekis [vnt.]: 5 Finansinė informacija PVM: Nurodyta kaina be PVM PVM/skirtumo apmokestinimas: PVM atskaitomas verslininkams Pristatymas ir priėmimas galima bet kada viskam iš pramoninės srities Yorick Diebels

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2013, WP Haton Crustica Mediterranean-Produktionslinie für handwerklich arbeitende Bäckereien Eine Vielzahl an mediterranen oder klassischen Produkten kann hergestellt werden. Die Produktionslinie kann für Baguettes mit Vormoulder oder mit Rundwirker für Standardprodukte eingesetzt werden. Bypass für Zwischengärschrank Ausroll- und Wirkoption verfügbar Verschiedene Formstationen und Dekorationsmöglichkeiten Produkte: - Baguettes - Vollkorn - Ciabatta - Handwerkliche Brote - Batone - Brioche Baujahr: 2013 Maximale Kapazität: 1.500 Stück/Stunde Bestehend aus: WP V300 Teigteiler, 1-Taschen-Ausführung, Typ 1000 - Baujahr: 2013 - Gewichtsbereich: 100 – 1.200 g - Voluminator WP CR59 AT konischer Rundwirker - Baujahr: 2013 - Heißluft, Beheizung - Öl am Kegel - Gewichtsbereich: 90–1.600 g WP AF 2002 Zwischengärschrank - Baujahr: 2013 - Lange Gärnetze - Rückzugsgurt - Zuführband mit Lichtschrankensteuerung - UV-Lampen - SPS-Steuerung mit Touchpanel WP Combi U-L - Baujahr: 2013 - Edelstahl-Rollo-Netz - Standardausführung, verlängert für spitze Enden - Mit angetriebenem Oberwirkband und Andrückbrett - Gewichtsbereich: 200 – 2.000 g Bdsdpju Upkdjfx Ag Rok WP Absetztisch / Make-up Table

Sąlyga: naudotas, Number of spindles: 6 units Working width: 230 mm Planing height: 120 mm Jointer table length: 2000 mm Feed motor: 4 kW Feed speed: 5-24 m/min 1 WEINIG Planer and Moulder Unimat 23 E ----- 6 spindles (2 of which are right-hand), reinforced motors, 8,000 rpm, ATS control system Machine will be cleaned and function-tested prior to delivery Working width: 20 - 230 mm Working height: 8 - 120 mm 1st spindle, bottom, 5.5 kW (motor replaced) ----- Diameter: 40 mm Speed: 6,000 rpm Tool swing diameter: 125 - 180 mm Rabbetting unit incl. tooling Hardened table insert in front of 1st bottom spindle 2nd spindle, right, 12.1 kW (motor replaced) ----- Shared motor with left vertical spindle Diameter: 40 mm Speed: 8,000 rpm Tool swing diameter: 112 - 250 mm Max. tool diameter behind fence line: 203 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm Bdedpfxexz Hh Uj Ag Rsk 3rd spindle, left ----- Shared motor with 2nd spindle Diameter: 40 mm Speed: 8,000 rpm Tool swing diameter: 112 - 200 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm Pressure shoe in front of left spindle, incl. spring-loaded side roller pressure 4th spindle, right, 8.3 kW (motor replaced) ----- Diameter: 40 mm Speed: 8,000 rpm Tool swing diameter: 112 - 250 mm Max. tool diameter behind fence line: 203 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm 5th spindle, top, 7.5 kW ----- Diameter: 40 mm Speed: 8,000 rpm Tool swing diameter: 112 - 200 mm Max. profiling depth: 35 mm Axial adjustment: 45 mm Split pressure shoe in front of top spindle, adjustable to tool swing diameter and swivelling away from tool, spring-loaded 6th spindle, bottom, 4.0 kW ----- Diameter: 40 mm Speed: 6,000 rpm Tool swing diameter: 112 - 250 mm Max. profiling depth: 15 mm Axial adjustment: 45 mm Spindles - General ----- All profiling spindles with high concentricity. Lubrication points for axial spindle movement. Feed system ----- Motor with mechanical brake, 4 kW Mechanical feed steplessly adjustable 5–24 m/min Infeed roller in front of 1st bottom tool, pneumatically controlled high/low Durofer pointed tooth rollers (Weinig patent) with depth limiter and self-cleaning Feed roller adjustment relative to left spindle, axial 35 mm Machine electrics ----- Operating voltage: 440 V (voltage range 380 - 420 Volt), 50 Hz Machine base, tables, and fences ----- Jointer table 2.0 m long (incl. straight edge) Manual Waxilit pump for table de-resining One powered rubber roller (spring-loaded in outfeed table) Two powered rollers in machine table, hardened Machine operation ----- Pressure shoe in front of top spindle with mechanical digital indicator Ejection after top spindle with mechanical digital indicator ATS/system, automatic 2-axis positioning for spindles no. 3 and 5 Min. working height: 12 mm Electric height adjustment for top spindles and feed Centralized lubrication points located at machine front Electronic digital displays at spindle 3 and 5 (axial), spindle 6 (radial), and spindle 4 (axial and radial) Safety and sound insulation ----- Full safety enclosure Easily high...

Sąlyga: geras (naudotas), Gamybos metai: 1998, Funkcionalumas: visiškai funkcionalus, ašies skersmuo: 40 mm, darbinis plotis: 230 mm, X ašies padavimo greitis: 5 m/min, Y ašies padavimo greitis: 36 m/min, obliavimo plotis: 20 mm, aukščio reguliavimo tipas: elektrinis, obliavimo aukštis: 160 mm, darbinio aukščio: 8 mm, Įranga: kabina, variklio stabdis, Weinig Unimat 23 E 6-galvos obliavimo-frezavimo staklės. Bjdpfxev A Rpco Ag Rodk Apatinė galva – 10 AG Tvoros ir artima galva – 15 AG (bendras variklis) Pirmoji viršutinė galva – 15 AG Antroji viršutinė galva – 15 AG Antroji apatinė galva – 10 AG Veleno greitis – 6000 aps./min. Padavimo greitis – min/5 m/min, maks/36 m/min Darbinis plotis – min 20 mm, maks 230 mm Darbinis aukštis – min 8 mm, maks 160 mm Veleno skersmuo – 40 mm Įrenginys šiuo metu vis dar eksploatuojamas, apžiūra galima ir laukiama.

Sąlyga: naudotas, Number of spindles: 6 pcs. Working width: 240 mm Planing height: 200 mm Surface table length: 2500 mm Feed motor: 4 kW Feed speed: 6-36 m/min Dimensions (L x W x H): 5000 x 1750 x 1700 mm SCM Superset PLUS Comp. 31, also suitable for window production ----- The machine has been cleaned and functionally tested! Technical data: ----- Maximum working width: 240 mm Maximum working height: 200 mm Feed: 6 to 36 m/min 1st spindle ----- First lower spindle, horizontal Motor with brake: 11 kW Diameter: 40 mm Speed: 6,000 rpm 2nd HSK tool holder ----- First right tool holder, vertical Motor with brake: 7.5 kW Speed: 8,300 rpm Vertical and horizontal electronic positioning 3rd HSK tool holder ----- First left tool holder, vertical Motor with brake: 7.5 kW Speed: 8,300 rpm Vertical and horizontal electronic positioning Electronic tool diameter setting (setup) 4th spindle ----- First upper spindle, horizontal Motor with brake: 11 kW Speed: 8,300 rpm Vertical and horizontal electronic positioning Electronic tool diameter setting (setup) 5th spindle ----- Bdjdpovnv Uzefx Ag Rek Second upper spindle, horizontal Motor with brake: 7.5 kW Speed: 8,300 rpm Vertical and horizontal electronic positioning Electronic tool diameter setting (setup) 6th spindle ----- Second lower spindle, horizontal Motor with brake: 7.5 kW Speed: 8,300 rpm Vertical and horizontal electronic positioning Additional technical features: ----- 2 feed units after the upper spindles to reduce the axle spacing from 620 mm to 450 mm Air-cushion lubrication on the worktable 2 x milling units with belt drive and quick-change HSK 85 system in positions 2 – 3 Working height of 200 mm instead of 120 mm 5 x electronic horizontal positioning positions (2 – 3 – 4 – 5 – 6) + (31.14.05 tandem feed after position 2) 4 x electronic vertical positioning positions (2 – 3 – 5 – 6) 3 x electronic tool diameter setting (setup) positions (3 – 4 – 5) Mobile 10 control PRL equipment for cutting out the glazing bead on 2nd upper horizontal spindle Machine is supplied without processing tools (Technical data according to manufacturer's information—no guarantee!)

Sąlyga: labai geros būklės (naudotas), Keturių pusių obliavimo staklės WEINIG Unimat 23 E maksimali obliavimo plotis 230 mm, obliavimo aukštis 130 mm, 5 velenai, Rankinis obliavimo matmenų nustatymas, velenų išdėstymas: apatinis 7,5 kW; kairys ir dešinys – 11 kW; viršutinis 11 kW; apatinis 7,5 kW, varikliai su stabdžiais, Bsdoxvc Uaspfx Ag Rodk veleno skersmuo 40 mm, Pilnai reguliuojami velenai, Įrenginys turi 4 traukiančius volus stalviršyje, tinka drėgnai medienai, padavimo sistema su kardano velenais, bepakopė reguliacija Įranga parduodama su galvutėmis, matomomis ant velenų, kardano velenai nesudilę, stalai nenudilę, veikia sklandžiai, be vibracijų ir drebėjimų, obliavimo staklės tvirtos, originalios, svoris apie 5 t. Labai gera būklė, viskas veikia.

Gamybos metai: 1997, Sąlyga: labai geros būklės (naudotas), Maximum workpiece width: 23 cm Maximum workpiece height: 18 cm Bdsdpfxek Dxrae Ag Rek 1 lower horizontal spindle 2 right vertical spindle 3 left vertical spindle 4 upper horizontal spindle Adjustable heads: up/down, right/left Spindle diameter: 40 mm Hydraulic side feed on the infeed table

Sąlyga: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, darbinis plotis: 260 mm, obliavimo aukštis: 170 mm, ašies skersmuo: 40 mm, obliavimo plotis: 260 mm, darbinio aukščio: 170 mm, padavimo variklio galia: 4 000 W, veleno greitis (maks.): 6 000 aps./min, veleno greitis (min.): 6 000 aps./min, aukščio reguliavimo tipas: elektrinis, ašies skaičius: 5, įėjimo dažnis: 50 Hz, Įranga: kabina, variklio stabdis, Weinig Profimat 23 E Darbinis plotis: 260 mm, Bdsdpfxjvgnb Ro Ag Rek Darbinis aukštis: 170 mm, 5 velenai, Veleno skersmuo: 40 mm, Velenų išdėstymas: 1- Apačia – 5,5 kW 2- Dešinė + 3- Kairė – 11 kW 4- Viršus – 5,5 kW 5- Apačia – 11 kW Padavimo greitis: 6 – 24 m/min - 4 kW Oro pagalvė stalo viduje Viena varoma ritinėlis išėjimo stalo dalyje. Su įrankiais.

Gamybos metai: 1999, Sąlyga: paruoštas naudoti (naudotas), Bendra informacija Staklių svoris: 3200 kg Šios WEINIG Unimat 23 E obliavimo staklės buvo pagamintos 1999 m., sukurtos efektyviam medienos obliavimui. Puikiai tinka medienos apdirbimo specialistams, siekiantiems padidinti gamybos našumą. Dėl išsamesnės informacijos susisiekite su mumis. Bedjxn U Amepfx Ag Rodk Pritaikymo sritys: Obliavimas

Gamybos metai: 1999, Sąlyga: paruoštas naudoti (naudotas), Parduodama keturpusė obliavimo staklė Weinig. Darbinis plotis: 230 mm, darbinis aukštis: 120 mm, padavimo greitis: 24 m/min, staklės matmenys I/P/A: apie 3500 mm/2000 mm/2000 mm, svoris: apie 3500 kg. Galima apžiūra vietoje. Bdsdpfx Agsxpw Uhs Rok

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, CASADEI F 25 LL FK - Spindle moulder with tilting spindle and table extensions Spindle moulder with tilting spindle from -45° to +45° Robust steel and cast iron construction Dynamically balanced milling unit anchored to the worktable Especially sturdy design Smooth operation due to precision assemblies and high own weight Standard with forward/reverse rotation and electronic interlock during direction change 5 speeds from 3000 to 10000 rpm Speed adjustment is simple and convenient from the machine side Standard with MK 4 quick-change spindle system Large cast iron worktable for lasting precision Easy handling thanks to controls and speed indicator on the machine front Milling fence with fine adjustment and aluminium fence jaws as standard High-performance industrial motors Equipment details: Milling fence Milling fence adjustable with crank/handwheel from the front panel With digital readout Quick-change spindle MK 4 quick-change spindle system standard on all CASADEI F 23 and F 25 models Optional sliding table Optional sliding table for small tenoning operations and slotting Scope of delivery: Manually tiltable spindle from +45° to -45° Speed display via LED on the front Aluminium fence jaws Curved milling guard Forward/reverse spindle rotation MK 4 quick-change spindle Milling fence adjustable with crank/handwheel from the front panel with digital readout Table extension left and right (2500 mm length) Pull-out workpiece support (2500 mm length) Model: CASADEI F 25 LL FK Article No.: 5220728 Technical data Worktable dimensions: 2500 x 810 mm Spindle tilting range: +45 to -45 degrees Usable spindle length Ø 30-35 mm: 140 mm Usable spindle length Ø 40-50 mm: 180 mm Spindle stroke: 90 mm Max. tool diameter for profiling: 250 mm Max. tenoning tool diameter: 350 mm Max. form cutter diameter: 160 mm Max. retractable tool diameter: 320 x 60 mm Speeds, 5-stage: 3000/4500/6000/8000/10000 rpm Bedpfodqzcxjx Ag Rsdk Motor power 400 V / 50 Hz / S6-40%: 7 kW Weight: 480 kg Extraction nozzle diameter at fence: 1 x 120 mm Extraction nozzle diameter under table: 2 x 80 mm Location: Ex stock 54634 Bitburg - Available immediately -

Sąlyga: naudotas, Gamybos metai: 2000, Number of spindles: 6 pcs Working width: 230 mm Planing height: 120 mm Planer table length: 2500 + 500 mm Feed motor: 3 kW Feed speed: 6–36 m/min 1 WEINIG Planing and Moulding Machine Unimat 23 E 6 spindles (including 2 right-hand spindles), powerful motors, EM 11 infeed magazine optional Working width: 20–230 mm Working height: 8–120 mm 1st spindle (bottom): 7.5 kW ----- Diameter: 40 mm Speed: 6000 rpm Tool cutting circle: 125–180 mm Rebate device incl. tool Table insert hardened in front of 1st bottom spindle 2nd spindle (right): 11.0 kW ----- Common motor with left vertical spindle Diameter: 40 mm Speed: 6000 rpm Tool cutting circle: 112–250 mm Max. tool diameter behind fence plane: 203 mm Max. profiling depth: 35 mm Axial adjustment range: 80 mm 3rd spindle (left) ----- Common motor with 2nd spindle Diameter: 40 mm Speed: 6000 rpm Tool cutting circle: 112–200 mm Max. profiling depth: 35 mm Axial adjustment range: 80 mm Pressure shoe in front of left spindle, incl. lateral spring-loaded roller pressure 4th spindle (right): 7.5 kW ----- Diameter: 40 mm Speed: 6000 rpm Tool cutting circle: 112–250 mm Max. tool diameter behind fence plane: 203 mm Max. profiling depth: 35 mm Axial adjustment range: 80 mm 5th spindle (top): 11.0 kW ----- Diameter: 40 mm Speed: 6000 rpm Tool cutting circle: 112–200 mm Max. profiling depth: 35 mm Axial adjustment range: 45 mm Divided pressure shoe in front of upper spindle, adjustable to tool cutting circle and swivelling away from tool, spring-loaded 6th spindle (bottom): 7.5 kW ----- Diameter: 40 mm Speed: 6000 rpm Tool cutting circle: 112–250 mm Max. profiling depth: 15 mm Axial adjustment range: 45 mm Spindles in general ----- All moulding spindles with high rotational accuracy. Lubrication points for axial spindle movement. Vertical spindle length: 170 mm Feed system ----- Motor with mechanical brake, 3 kW Bdsdjwqr Rvopfx Ag Rsk Infinitely variable mechanical feed 6–36 m/min Infeed roller in front of 1st bottom tool, pneumatically controlled for up/down, Durofer pointed tooth rollers (Weinig patent) with depth limiter and self-cleaning Axial adjustment range of feed rollers relative to left spindle: 35 mm Extension of the oscillating shaft relative to left spindles to 150 mm Machine electrics ----- Operating voltage: 380–400–415 volts, 50 Hz Machine base, tables, and fences ----- Planer table 2.5 m long (incl. straightening guide) Aluminium extension 0.5 m for planer table, incl. extension of straightening guide Manual Waxilit pump for table resin removal One driven rubber roller (spring-loaded in outfeed table) Pressure elements and guides ----- Top pressure rollers, pneumatically operated Top pressure rollers can be swivelled away, opposite right spindles for easy tool change Machine operation ----- Pressure shoe in front of top spindle with mechanical digital display. Outfeed after top spindle with mechanical digital display. ATS/E system, automatic 2-axis positioning for spindle No. 3 and 4 Minimum working height: 12 mm Electric height adjustment of top spindles and feed Central lubrication points positioned at the front of the machine Safety and sound...

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, darbinis plotis: 255 mm, obliavimo aukštis: 160 mm, ašies skersmuo: 40 mm, obliavimo plotis: 255 mm, darbinio aukščio: 160 mm, padavimo variklio galia: 3 000 W, veleno greitis (maks.): 6 000 aps./min, veleno greitis (min.): 6 000 aps./min, aukščio reguliavimo tipas: elektrinis, obliaus veleno skersmuo: 40 mm, įvesties srovės tipas: trifazis, ašies skaičius: 5, įėjimo dažnis: 50 Hz, Įranga: kabina, variklio stabdis, Weinig Unimat 23 E with 5 spindles, Working width: 255 mm, Bdedpfx Asxg Sa Hjg Rek Working height: 160 mm, Spindle diameter: 40 mm, Feed: 3 kW / 6 – 36 m/min, Spindle arrangement: 1-Bottom (5.5 kW) 2-Right (5.5 kW) 3-Left (7.5 kW) 4-Top (5.5 kW) 5-Bottom (4.0 kW) Driven roller in the outfeed table.

Sąlyga: labai geros būklės (naudotas), Four-sided planer SCM Compact XL - Planing width: 23 cm Bodpfx Aslat Hdsg Rjdk - Planing height: 13 cm - Electrically adjustable top head and feed rollers - All spindles adjustable vertically and horizontally - Bottom spindle: 4 kW, right and left spindles each driven by a 7.5 kW motor, top spindle: 5.5 kW, universal spindle: 5.5 kW Machine in very good condition

Gamybos metai: 1999, Sąlyga: paruoštas naudoti (naudotas), Darbinis plotis: 230 mm, darbinis aukštis: 160 mm, velenų skaičius: 5, veleno diametras: 50 mm, veleno galia: 4x 5,5 kW / 2x 11 kW, padavimas: 24 m/min, padavimo stalo ilgis: 3000 mm, vertikalaus veleno ašinė eiga: 80 mm, horizontalaus veleno ašinė eiga: 45 mm. Bendras pajungimo galingumas: 126 kW, oro poreikis: 8400–9600 m³/val., staklių matmenys (X/Y/Z): apie 3500 mm / 2000 mm / 1800 mm, svoris: apie 3500 kg. Į komplektą įeina Weinig EM-11 įstūmimo įrenginys ir tinkamas ištraukimo paskirstytuvas. Dokumentacija yra. Galima apžiūrėti vietoje. Bjdpfx Agou Damdo Rjdk