Keturpusis oblius WEINIG tipas Unimat 23 EL

Weinig Unimat 23 EL

Sąlyga: naudotas, Gamybos metai: 1998, Dimensions (L x W x H): 450 x 222 x 190 cm Price: On request - Year of manufacture: 1998 - Documentation available: No - CE marking present: Yes - CE certificate available: No - Serial number: 83929 - Number of spindles [pcs]: 5 - Spindle 1: - Spindle type: Horizontal spindle - Motor power [kW]: 7.5 - Spindle 2: Nodpfx Aoxr U Nuedueli - Spindle type: Vertical spindle - Spindle 3: - Spindle type: Vertical spindle - Motor power [kW]: 11 - Spindle 4: - Spindle type: Horizontal spindle - Motor power [kW]: 11 - Spindle 5: - Spindle type: Horizontal spindle - Motor power [kW]: 7.5 - Transport dimensions: 4500 mm x 2220 mm x 1900 mm (L x W x H) - Number of transport packages [pcs]: 1 Financial Information VAT: The stated price is exclusive of VAT VAT/Margin scheme: VAT is deductible for businesses Delivery and trade-in possible at any time for all items from the industrial sector Yorick Diebels

Sąlyga: beveik kaip naujas (naudotas), WEINIG Hydromat H30N, S/N 253-886, Year 1991, 9 spindles Hydromat H30 with short infeed table and heavy-duty 6-roller feed system • Maximum working width: 300 mm • Maximum working height: 140 mm • Electronic, stepless feed, 12–120 m/min. • Feed motor: 22.0 kW • 1st spindle below: 11.0 kW • 2nd spindle right: 11.0 kW • 3rd spindle left: 15.0 kW • 4th spindle left: 11.0 kW • 5th spindle right: 11.0 kW • 6th spindle top: 22.0 kW • 7th spindle below: 30.0 kW • 8th spindle top: 11.0 kW • 9th spindle below: 11.0 kW • All spindle motors with electronic brake • COMPLETELY NEW CUTTERHEAD SPINDLES • Spindle diameter: Ø 50 mm • Spindle speed: 6,000 rpm • 6 powered feed rollers in the table – hard-chromed • Spindles 1 + 6 + 7 + 8 + 9 with NEW counter bearings • Hydraulic counter bearing clamping Nodpfx Aetynpxsdujli • Spindles 2 + 3 + 8 + 9 with straight jointer • Spindles 4 + 6 pneumatic pressure • NEW feed rollers, D=170 mm • Hard-chromed table plates • Hard-chromed fences • Heavy-duty top pressure rollers – pneumatic • Heavy-duty side pressure rollers – pneumatic • Automatic table lubrication – NEW • Central lubrication points • NEW standalone control panel, 5 m cable • NEW standalone control cabinet, 5 m cable • Operating manual, spare parts list, and circuit diagram included + Many NEW spare parts/accessories Dimensions: • Total length: approx. 6,150 mm • Total width: approx. 2,160 mm • Machine weight: approx. 9,500 kg Power connection: • Total connected load: approx. 157 kW Condition: Machine as shown in photos – technically as-new Payment: Payable in full by bank transfer prior to loading Delivery time: By arrangement Delivery: EXW Inspection: Possible anytime by appointment Offers & inquiries only with complete company details Errors and prior sale excepted

Sąlyga: geras (naudotas), Gamybos metai: 2004, Weinig Unimat 23 EL Year of manufacture: 2004 Working width: 230 mm, working height: 120 mm 1. Bottom spindle with 7.5 kW motor and spindle brake 2. Right spindle with individual 7.5 kW motor and spindle brake Speed 8,000 rpm with high-performance ball bearings, NC-axis with frequency inverter, axial stops milled down to 35 mm height 3. Left spindle with individual 7.5 kW motor, speed 8,000 rpm with high-performance ball bearings, NC-axis with frequency inverter, radial pneumatic pressure fence on left side for workpiece widths up to 200 mm 4. Top spindle with 7.5 kW motor and spindle brake, speed 8,000 rpm with high-performance ball bearings, NC-axis radial Pneumatic control, axial adjustment range 40 mm, glazing bead removal, pneumatically actuated. - Feed system with 4 kW motor and feed brake - Short-piece package - UC-Matic package consisting of: PLC control, central motor start, parts monitoring, operator terminal, free-standing control cabinet, free-standing operator panel, magnetic interlock for safety cover - Enhanced sound insulation - Automatic dressing and feeding system for varying workpiece lengths and widths Workpiece dimensions: Length: 400 – 3,500 mm (4,000 mm) Width: 40 – 200 mm Thickness: 20 – 100 mm Powered conveyor belt Belt width 250 mm, conveying length 4,500 mm, additional light barrier for signal transmitter Weinig Hydro Finish Planer Uniplan 23 Year of manufacture: 2004 Working width: 230 mm, working height: 120 mm 1. Bottom spindle with 7.5 kW motor and spindle brake, speed 7,200 rpm 2. Top spindle with 7.5 kW motor and spindle brake, speed 7,200 rpm, NC-axis radial - First infeed roller sequenced with photoelectric sensors - NC-axis for separate feed height adjustment - Improved sound insulation - UC-Matic package Nledpfowyulujx Adusi - 2 Hydro straight-knife cutterheads 501 with HSS planer knives 30 mm x 3 mm, max. 9,000 rpm, dim. 163 mm x 230 mm x 50 mm, Z=4

Gamybos metai: 1997, Sąlyga: labai geros būklės (naudotas), I am selling a complete window profile production line: 1 pc. 5-spindle four-side planer with saw Weinig Unimat 23EL - without HESS sanding machine; an alternative replacement machine can be arranged 2 pcs. tenoning and slotting machines Weinig Unitec 10 2 pcs. profiling and rebate automats Weinig Univar 10 Center 1 pc. CNC dowel machine KOCH WinDoor - set of complete Weinig automation (feed system and conveyors) Nljdpfxjfzzidj Aduji Year of manufacture: 1997. Cutter heads: OERTLI. Available immediately. Already dismantled and delivered on original pallets. Condition: very good!

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2015, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: SK-K-24001, 1 optimized cross-cutting line with scanner Manufacturer: Dimter Model: OptiCut 450 Year of manufacture: 2015 Item no.: SK-K-24001 DIMTER cross-cutting system with 1 x OptiCut 450 and feeding system F 100 featuring LuxScan CombiScan+ C 200 with curvature measurement Nljdpfewya Syjx Aduji The system was operational until 2024, has been professionally dismantled, and can be inspected in this condition.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2005, Funkcionalumas: visiškai funkcionalus, Four-side planer Weinig Unimat 23 EL (7 spindles) Year of manufacture: 2005 Technical condition: very good. Technical data: - Working width: up to 230 mm - Working height: up to 140 mm - Number of spindles: 7 Spindle arrangement: 1. Bottom horizontal 2. Right vertical 3. Left vertical 4. Top horizontal 5. Bottom horizontal 6. Top horizontal 7. Bottom horizontal - Spindle diameter: 40 mm - Spindle speed: 6,000 rpm - Feed speed: steplessly adjustable, from 5 to 24 m/min - Infeed table length: 1,970 mm Spindle motor power: - Bottom horizontal: 5.5 kW - Right and left vertical: 7.5 kW - Top horizontal: 7.5 kW Nlsdjv Nvr Njpfx Aduei - Total installed power: 67 kW For an additional fee, installation, commissioning, and operator training can be provided. We also offer ongoing service and maintenance.

Sąlyga: labai geros būklės (naudotas), Planer 9 Köpfe Arbeitsbreite: 20 cm Arbeitshöhe: 22 cm 5 Ziehwalzen im Tisch Köpfe: 1 unten – 7,5 kW 2 rechts – 11 kW 3 oben – 11 kW 4 rechts – 11 kW 5 oben – 11 kW 6 unten – 11 kW Nsdpfxetrdwts Adujli 7 oben – 11 kW 8 unten – 11 kW 9 universal – 11 kW PERFEKTER ZUSTAND!

Sąlyga: naudotas, Gamybos metai: 2007, No. 3177 Nodpfx Aju Atmujdujli Grecon Dimter OptiCut 200-1 Optimizing Cross-Cut System Used, year of manufacture: 2007 For cutting fixed lengths Wood dimensions to be processed: - Infeed lengths min./max. 3000 - 5000 mm - Infeed widths min./max. 80 - 200 mm - Infeed thicknesses min./max. 38 - 80 mm - Maximum wood cross-section: 200 x 50 mm - Final wood length min./max. 700 - 1000 mm - Average number of cuts per board: 5 - Types of wood: softwood or hardwood Machine performance: - Max. feed speed: 180 m/min, infinitely variable - Time per cutting operation incl. braking: 0.7 - 1.2 s Position overview: Pos. 1: Infeed conveyor belt, positioned before the saw - Length: 1.5 m, coupled with saw feed motor Pos. 2: Automatic cross-cut saw OptiCut 200-1, left-hand version - Equipped with integrated length measuring wheel and built-in waste air blast mechanism - Graphic input terminal, 1/4 VGA display, with numeric keypad and function keys, with OptiCom software package for system control - The machine is loaded from the left Pos. 3: Outfeed conveyor / sorting station - With drive unit, without ejector - Belt length approx. 1.5 m Machine already dismantled and stored - The infeed table was not used by the previous owner. Two feed rollers were mounted for material infeed. The feed table is available, only the rubber belt is missing. For sale on behalf of customer, ex-site Austria, without transport and assembly - Errors in description and price are reserved - Transport and loading by us optional To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended. Sale as-is Technical data, condition description, year of manufacture, and scope of delivery according to manufacturer's brochure and previous owner, without guarantee - Subject to prior sale - For used machines, any guarantee/liability is excluded; 'sold as inspected' applies - Photos and videos are for reference only and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment before collection or dispatch Delivery terms: ex location

Gamybos metai: 2002, Sąlyga: geras (naudotas), Four-side planer Weinig Unimat 23 EL Njdpjhhyr Aefx Aduoli - machine in stock - German production - year of manufacture: 2002 - technical documentation included TECHNICAL PARAMETERS: - planing width: 230 mm - planing height: 170 mm - feed speed adjustable via inverter: 6–26 m/min - spindle diameter: 40 mm 1st bottom spindle: 7.5 kW 2nd right spindle: 7.5 kW 3rd left spindle: 7.5 kW 4th top spindle: 7.5 kW 5th bottom spindle: 7.5 kW 6th top spindle: 7.5 kW - feed motor power: 4 kW - feed on cardan shafts - pneumatic pressure system - five upper steel feed rollers - four upper rubber feed rollers - electric height adjustment - suction nozzle diameter: 140 mm - central lubrication - table length: 1980 mm Machine dimensions: - length: 520 cm - width: 210 cm - height: 210 cm - weight: 4000 kg

Sąlyga: labai geros būklės (naudotas), Four-Side Planer Weinig Unimat 23 EL Working width: 230 mm Working height: 160 mm Nedporb An Uefx Adusli Spindle arrangement: Bottom – 5.5 kW Right – 4 kW Left – 5.5 kW Right – 4 kW Top – 11 kW Bottom – 5.5 kW Top – 7.5 kW Bottom – 7.5 kW Feed speed adjustable via variator: 6–36 m/min Feed driven by cardan shaft Table with powered rollers Pneumatic pressure units CE certificate Year of manufacture: 2003

Sąlyga: geras (naudotas), Four-side planer Weinig Unimat 23 Lamella Machine 9 spindles, Nsdpfx Ajpq T Rbsdueli grooved bed Working width: 230 mm, Working height: 170 mm, Spindle diameter: 40 mm, Feed: 5.5 kW / 6 – 36 m/min, Spindle configuration: 1-Bottom (5.5 kW) 2-Right (5.5 kW) 3-Left (5.5 kW) 4-Right (5.5 kW) 5-Top (11 kW) 6-Bottom (5.5 kW) 7-Top (7.5 kW) 8-Bottom (37 kW) 9-Universal (11 kW) 5 powered feed rollers in table

Sąlyga: naudotas, Planer and moulder Weinig Hydromat 2000 for four-sided planing and profiling of timber with groove bed, without soundproof cabin. Spindles: 5 Spindle 1: Bottom / 7.5 kW Spindle 2: Right / 7.5 kW Nlodpformvhfox Adusi Spindle 3: Left / 11 kW Spindle 4: Bottom / 11 kW Spindle 5: Top / 15 kW Working width: 230 mm Working height: 160 mm Spindle diameter: 50 mm

Sąlyga: labai geros būklės (naudotas), working width 230 mm working height 160 mm 5 heads head configuration: bottom/right/left/top/bottom spindle diameter 40 mm (last 50 mm) manually adjustable jointer on the last spindle table rollers electric adjustment of the pressure beam variable feed speed up to 36 m/min chromed table pneumatic pressure on feed rollers Nljdpfsqmmfusx Aduoi

Sąlyga: naudotas, Gamybos metai: 1994, Doppia sega multilama a mandrino Nlodetqld Uepfx Adusi - Produttore: A.Costa - Modello: Jaguar - Altezza massima di taglio: 200 mm