Daugiapjūklė obliavimo staklė su plaukiojančiu pjūklu

WEINIG K 23T 245/120 laser

Būklė: naujas, Gamybos metai: 2022, New machine Year of manufacture: 2022 Standard equipment: - Electrically operated height and tilt adjustment, 0–46° with automatic correction of cutting height during tilting - Control unit at eye level, swiveling - Double roller carriage, carriage length 3,000 mm - Rip fence, manually adjustable via measuring scale, including manual fine adjustment, cutting width 1,000 mm - Crosscut fence with fixed 90° position, manually adjustable via measuring scale up to 3,200 mm - Maximum saw blade projection: 150 mm - Maximum saw blade diameter: 450 mm - Drive power: 4 kW (5.5 HP) at 4000 rpm - AKE clamping system for the main saw blade - Working height: 91 cm Motor: 5.5 kW (7.5 HP) with VARIO F45 - Stepless speed adjustment from 2,000 to 6,000 rpm - Exact adaptation of speed to the material increases cutting quality and saw blade service life Extended cutting height for one-sided tilting: This option is equipped for one-sided tilting with a large extraction hood allowing a maximum saw blade diameter of 550 mm and a maximum blade projection of 204 mm. In combination with a scoring unit, maximum saw blade diameter is 500 mm, maximum cutting height 179 mm. Only available in combination with at least 5.5 kW (7.5 HP) drive power. 2-axis scoring unit for single-sided tilting - With electromotive height and lateral adjustment, scoring blade height programmable with rapid lowering and lifting, drive motor 0.75 kW (1 HP), 8200 rpm. Retrofit only possible on machines prepared for scoring unit. Djdew I Uxcopfx Afnskk LED lighting - Highly energy-efficient LED technology for clearly marking the hazardous area of the scorer. The Altendorf double roller carriage is renowned for its smooth operation and precise running. It can be locked steplessly in any position. The large double rollers, precision-manufactured from hardened steel, keep the upper carriage absolutely precisely aligned with the lower carriage on their respective hard-chromed round guide bars. This quality of movement is maintained even after decades of use and contamination. The carriage construction features a highly torsion- and shape-resistant multi-chamber system. The table surface is precisely planed and anodized. A hard-chromed round bar, positively fitted to the upper carriage, serves as a mount for the cross-slide and as an interface for various accessories. The entire unit is low-maintenance and requires no lubrication. On/Off switch on double roller carriage - The On/Off switch is always within easy reach. With four buttons, both the main saw blade and the scorer can be switched on and off. This saves steps and increases safety. Angle-mitre fence, crosscuts up to 3500 mm - This ALTENDORF-patented fence with integrated length compensation makes it easy to cut mitres and angles precisely in one function. In both positions, the swing angle is infinitely adjustable by up to 49° and is displayed via a measuring scale. The backlash-free and robust folding stops can be easily shifted and, as single stops, set along the full length up to a maximum of 3,500 mm.

Būklė: naujas, Geriausia kaina: 4499 Eur (EXW Jonava, Lietuva) Stumdomo stalo matmenys – 2200 x 375 mm Didžiausias apdirbimo ilgis – 1500 mm Atstumas tarp pjūklo disko ir išilginės liniuotės – 1140 mm Pjūklo disko skersmuo – 400 mm Pjovimo aukštis (90°) – 115 mm Dodpfx Afjdnxydenskk Pjovimo aukštis (45°) – 105 mm Pagrindinės ašies apsisukimų skaičius – 4500/6000 aps./min Pagrindinės ašies skersmuo – 30 mm Pjūklo disko pasukimo kampas – 0–45° Pjūklo disko pakėlimas/nuleidimas – elektrinis valdymas Pagrindinio variklio galia – 5,5 kW Įpjovimo pjūklo disko skersmuo – 120 mm Įpjovimo disko apsisukimų skaičius – 7000–8000 aps./min Įpjovimo veleno skersmuo – 20 mm Įpjovimo variklio galia – 1,1 kW Svoris: 700 kg * Naudojant 400 mm disko pjūklą, mažesnį diską reikia nuimti. Sumažintam pjūklui rekomenduojama nenaudoti didesnio nei 350 mm pagrindinio apsauginio gaubto.

Būklė: naudotas, Gamybos metai: 2015, NC 1000 Numerical Control, Biesse Works Advanced Software Working field in X-axis: 4300 mm - X-axis travel: 5365 mm Working field in Y-axis: 2205 mm - Y-axis travel: 2749 mm Working stroke in Z-axis: 160 mm - Z-axis travel: 385 mm Dkedpewt Snysfx Afnok FT-Nesting full-plane worktable Automatic loading system with side lifting table Automatic labelling unit for barcode printing Automatic printing and application system for adhesive labels No. 1 vertical electrospindle with pre-setting for 4 axes (C-vector axis), with automatic tool changer, HSK F63, 12 kW, incl. flange for aggregate use Knife unit integrated into the drilling head on X-axis – diameter 120 mm Automatic tool change system with 8 positions – positioned on the machine operator head Automatic tool change system with 21 positions – positioned on the rear of the machine with chain Drilling head BH 40 L with independent spindles, arranged as follows: – No. 17 vertical in X-axis – No. 12 vertical in Y-axis – No. 6 horizontal in X-axis – No. 4 horizontal in Y-axis Automatic unloading system with motorized conveyor belt Front protection and safety system with mats and limiting nets Automatic lubrication system Air conditioning for the control cabinet No. 2 vacuum pumps with 250 m³/h each

Būklė: labai geros būklės (naudotas), Four-sided planer Weinig - Maximum planing width: 230 mm - Maximum planing height: 120 mm - 5 heads: bottom - 5.5 kW; left and right - 11 kW; top - 11 kW; bottom - 5.5 kW - Feed motor: 4 kW - Fully adjustable heads - Electrically adjustable height and planing width - Spindle diameter: 40 mm - Feed via cardan shafts with stepless adjustment Dkedpfx Afsrigxyenek - Robust planer by WEINIG - Machine length: 415 cm - Machine inspected and in original condition

Būklė: geras (naudotas), Gamybos metai: 2020, Masterwood Project 351 L 3-Achs CNC-Bearbeitungszentrum Beschreibung: Luftgekühlte 3-Achs-Frässpindel 17,5 PS (HSK-63F) Statischer Frequenzumrichter für programmierbare Drehzahl 1.500–24.000 U/min Werkzeugwechsler mit 22 Positionen 6 pneumatische, absenkbare Werkstückanschläge zur Beladung/Positionierung schwerer Werkstücke Vorbereitet für die Montage von Spannvorrichtungen 2 horizontale Spannzangen für Balkenholz 6 Nullpunkte entlang der X-Achse (Positionierung der Werkstücke an der Rückseite der Auflagen) 8 Nullpunkte entlang der X-Achse (Positionierung der Werkstücke mittig auf den Auflagen) Komplette Referenzierung rechts entlang der Y-Achse Komplette Referenzierung links entlang der Y-Achse 2 Arbeitsfelder 1 x 100m³ Vakuumpumpe 24 Vakuumsauger Handbediengerät mit digitaler Anzeige Dedpfx Afjvu U Itjnskk Automatisches Werkzeugvermessungssystem Abförderband für Restmaterial Bohraggregat mit 19 Spindeln (32 mm Teilung), 2,2 kW: - 7 Vertikalbohrspindeln in X-Richtung - 6 Vertikalbohrspindeln in Y-Richtung - 4 Horizontalbohrspindeln in Y-Richtung - 2 Horizontalbohrspindeln in X-Richtung (Alle Bohrspindeln einzeln programmierbar) Steuereinheit mit PC SINCRO CAD/CAM MASTERWORK Software Technische Daten: Bearbeitungsbereich X-Achse: 5.130 mm Bearbeitungsbereich Y-Achse: 1.550 mm Verfahrgeschwindigkeit X/Y: 80 m/min Verfahrgeschwindigkeit Z: 25 m/min Max. Werkstückdicke: 200 mm Fräsmotorleistung: 17,5 PS (S1) Fräsmotordrehzahl: 1.500–24.000 U/min Bohraggregat: 3 PS Werkzeugaufnahmesystem: HSK63-F Werkzeugwechsler: 22 Positionen Vakuumpumpe: 100m³ Absaugstutzen: 250 mm Luftfördermenge: 4.500 m³/h Luftgeschwindigkeit: 30 m/s Betriebsdruck: 7 bar Druckluftverbrauch: 300–500 l/min Sicherungswert: 40 A Maschinengewicht: 7.000 kg Alle Änderungen, Irrtümer und Zwischenverkauf vorbehalten! Keine Gewähr für die Richtigkeit der Angaben. Die besten Holzbearbeitungsmaschinen aus den Niederlanden.

Gamybos metai: 1998, būklė: labai geros būklės (naudotas), I am selling the following window manufacturing set: - 1 unit Mortise and Tenon Machine Weinig Unitec 10. - 1 unit Profile Shaping Center Weinig Univar 10. Year of manufacture: 1998. Milling heads from OERTLI. Djdpfxsfzzhye Afnekk Available immediately. Price for the complete set: €17,000. Condition: very good!

Būklė: naujas, Dimensions (LxWxH): 2480 x 1230 x 65 to 105 mm Width: 1230 mm Length: 2480 mm Approx. weight: 675 kg Dsdpjfk Ah Nsfx Afnokk Welding and assembly tables of the SMT flex series are robust, height-adjustable, and practical workstations designed for machining heavy workpieces, handling electric power tools, or working with chemical or oily substances. Thanks to transport bars integrated into the base, the tables can be easily relocated using a pallet truck and can be quickly adjusted in height to match other work surfaces. Height adjustment ranges from 650 mm to 1,050 mm (lower heights available on request). The solid steel tabletop, up to 20 mm thick, withstands even heavy impacts or blows—such as those commonly encountered when working with heavy hand tools or handling very heavy metal workpieces or tools—without suffering lasting deformations or indentations. The metallic work surface enables unrestricted use of magnetic clamps for securing components. Due to its substantial deadweight, this versatile table provides excellent stability against tipping—even when loaded with heavy items or tools at its maximum height position. For accessories and further information, please follow this link:

Būklė: naudotas, Gamybos metai: 2004, Used machine Year of manufacture: 2004 Equipment and technical data: - Edge feed for coil and strip material - Jointing unit with 2 milling heads - Glue application system (cartridge) - 3-roller pressure unit - End trimming (cut-off saw) unit - Radius trimming unit - Radius scraper unit Dodpfx Ajvymdqsfnokk - Corner copying unit - Surface scraper - Buffing unit Workpiece thickness min./max.: 6/50 mm Edge band thickness: 0.4–15 mm Edge band height max.: 55 mm Edge band strip length min.: 350 mm Edge band projection per side max.: 3 mm Workpiece width min.: 60 mm Workpiece length min.: 180 mm Feed speed: 12.5 m/min Machine dimensions (L x W x H): 6480 x 1250 x 1690 mm Availability: short-term Location: Flörsheim

Būklė: naujas, Gamybos metai: 2022, Working width: 630 mm Planing height: 300 mm Cutterhead: Tersa Number of knives: 4 Height adjustment: electric Planing thickness display: mechanical counter display Feed speed: 7-11-15-19 m/min Infeed roller: segmented steel Pressure bar: segmented Outfeed roller: rubber Table rollers: none Table extension: Yes, infeed and outfeed Motor power: 7.5 kW Dodpfohpl T Hex Afnskk Extraction port: 160 mm Machine length: 1070 mm Machine width: 900 mm Weight: 750 kg

Gamybos metai: 1998, būklė: labai geros būklės (naudotas), I am selling the Weinig Univar 10 window profile folding machine center. Year of manufacture: 1998. Milling heads: OERTLI. Available immediately. Unit price: €8,500. 4 units available. Condition: very good! Dkjdpfxsfzzhre Afnsk