20-60-543 Stumdomas stalinis pjūklas

WOODLAND MACHINERY MJ6122TD(400)

Gamybos metai: 2013, Sąlyga: naujas, Wood-fired oven with direct firing Baking surface: 1.0 x 0.7 x 0.25 m (L x W x H) 8 cm fireclay lining with internal ash discharge Dedpfx Abjygm Uj Sekg Oven door folds down Optionally available with fully automatic pellet firing

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Spindle tiltable: No Height adjustment: Handwheel Dkedjgzlpkopfx Ab Seg Tilting adjustment: - Cutter jaw adjustment: Manual Height display: Mechanical counter Tilt angle display: - Cutter fence display: Mechanical counter Cutter spindle diameter: 30 mm Speeds: 3000, 4500, 6000, 7000, 10000 rpm Motor power: 7 kW Motor brake: Yes, automatic Extraction port: 2 x 120 mm Machine length: 2599 mm Machine depth: 900 mm Weight: 655 kg

Sąlyga: naujas, Gamybos metai: 2024, Saw Saw blade speed: 3000 / 4000 / 5000 RPM Saw blade diameter and bore: 300 – 400 mm, 30 mm Saw blade tilt: 90° – 45° Cutting depth at 90° / 45°: 125 mm / 90 mm Dksdpeglfv Sofx Ab Ssg Cutting width with parallel fence version Z400 M, Z400 EL: 1350 mm (optional 1000 / 1525 mm) Cutting width with parallel fence version Z400 X1, Z400 X3: 1250 mm (optional 1500 mm) Cutting length: 3500 mm (optional 2500 mm / 4100 mm) Cast iron table dimensions: 985 mm x 710 mm Sliding table dimensions: 3200 mm (optional 2200 mm / 3800 mm) x 420 mm Cross table dimensions: 1420 mm x 650 mm Length of swiveling crosscut fence: 2295 mm (telescopic extension up to 3000 mm) Scoring unit Scoring blade diameter and bore: 120 mm, 20 mm Cutting depth with 120 mm diameter blade: 3.5 mm Scoring blade rotational speed: 8200 RPM Scoring saw motor power: 1.3 kW / 2 HP (S6) Weight: 850 kg (Z400 – 3200) – 1080 kg (Z400 X3 – 3800) Voltage: 400 V 3-Phase (optional 230 V 3-Phase) Motor power (3-Phase): 7 kW / 9.5 HP (S6), optional 9.2 kW / 14 HP (S6)

Sąlyga: naujas, mit Hobelwelle Typ: R-R-RP1300 Arbeitsbreite: 1300 mm Dodpfxjd H Sc Es Ab Sjkg Min. Werkstücklänge: 538 mm Arbeitshöhe: 3–110 mm Vorschubgeschwindigkeit: 6–30 m/min Gesamtmotorleistung: 77,12 kW Motorleistung 1. Aggregat: 22 kW Motorleistung 2. Aggregat: 30 kW Motorleistung 3. Aggregat: 18,5 kW Schleifbandabmessung: 1330 x 2200 mm Betriebsdruck: 0,55 MPa Absaugleistung: 12.000 m³/h Transportabmessungen: 3090 x 2020 x 2260 mm Gewicht: 4.700 kg

Sąlyga: naudotas, Gamybos metai: 2019, įskaitant 4 ritinėlių padavimą Felder Variofeed 4 (3-18 m/min.), valdomą aukščio ir kampo reguliavimą Frezos velenas D=30 mm Centrex prieigos frezos apsauga Frezos tvoros maks. frezos skersmuo 250 mm bepakopė tikslioji reguliacija nuėmimo pusėje +35/-10 mm su skaitmeniniu indikatoriumi Visa tvora poziciniu būdu reguliuojama Frezos tvora pakeliama ir nuleidžiama Frezos tvoros bėgiai 550 ALU anoduoti su apsauginiais liniuotėmis Greitoji spaustuvo sistema frezos tvorai Ištraukiamas rėmas 1270 mm su avariniu mygtuku EURO Kreipiamoji frezos apsauga 5,5 kW variklis su reguliuojamu greičiu Apsisukimų diapazonas: 1500 - 10000 aps./min. Apsisukimų diapazonas: 8000 - 15000 aps./min. HG velenas Valdymo pultas akių lygyje su x-motion valdymu Stalo matmenys: 1160 x 770 mm Stalo anga: 320 mm Nukreipimo įrenginys padavimui F 900 įskaitant padavimo prailgintuvą Saugojimo vieta: tiekėjas Dkodpfxjxta Dye Ab Sog

Sąlyga: naujas, Gamybos metai: 2025, - TFON Leveltech® išlyginimo mašinų serija Modeliai: S-3560, S-3511, S-3513, S-3516 -Šios mašinos skirtos plonų medžiagų tiksliajam išlyginimui, turi pažangius elektromechaninius valdiklius bei patogius liečiamuosius ekranus efektyviai darbui. -Medžiagos storis: 0,3 mm – 5,0 mm Maksimalus medžiagos plotis: -S-3560: 600 mm -S-3511: 1.100 mm -S-3513: 1.300 mm -S-3516: (plotis nenurodytas) Minimalus medžiagos ilgis: 70 mm. Išlyginimo tarpo reguliavimas: Elektromechaninis / PLC valdomas. Apsauga nuo perkrovos: Standartinė. Valdymo ekranas: Liečiamasis ekranas Mašinos svoris: Dkodehwb Utepfx Ab Sog S-3560: 5.000 kg S-3511: 10.000 kg S-3513: 14.000 kg Mašinos matmenys (I × P × A): S-3560: 1.985 × 1.585 × 1.820 mm S-3511: 2.485 × 1.585 × 1.820 mm S-3513: 2.695 × 1.585 × 1.820 mm

Sąlyga: naujas, Gamybos metai: 2024, Mitre saw with electronic pusher and controlled axis. Cutting capacity: 55 x 360, 80 x 340, 95 x 325, 125 x 295, 135 x 280 mm Minimum workpiece thickness: 10 mm Work table inclined at 8° Technical specifications of the saw unit: Pneumatic up-cut saw TR500 Motor power: 10 HP (7.5 kW), 400/50 Hz. TCT blade diameter: 500 mm, F=30 Z=144 S=4.6 Cutting cycle time: 4 seconds Technical features of the feed system: PUSH FEED SYSTEM AVAILABLE LEFT AND RIGHT SIDE Feed by rack and pinion system with brushless motor Positioning accuracy: +/- 0.4 mm Powerful infeed motor for bundle weight up to 80 kg Maximum push feed system speed: 90 m/min Pneumatic lift of pusher at the end of the cutting cycle and overhead return. Data input management: 12-inch TOUCH SCREEN controller (800x600 Pixels) USB port Ethernet port LINUX operating system Loading and saving machine parameters via USB port Dsdpfxjhw Ng Ie Ab Sjkg Edit cutting cycle (pattern) and enter directly at the controller Transfer cutting lists created on PC via USB or Ethernet port Operating software: Manual entry of the stock length Partial optimization without measuring the panel length Cutting cycle with 3 optimization options (maximum length, sequence, and board order) 1000 cutting lists with 11 sizes each, or one list with 10,000 consecutive sizes "OPTI" package: automatic board length detection and full optimization. Piece length measurement via photocell Cutting cycle: with 6 optimization criteria (longest length, sequence, board order, volume, minimal waste, and priority length) "OPTI PLUS" package: overall optimization with knot and defect removal (OPTION NOT INSTALLED ON THE MACHINE) Technical description: "OPTI PLUS" package: for removal of knots and defects Photocell for reading knots and defects during timber mapping Marking with fluorescent chalks (Note Ð Only available in combination with ZA250) Pneumatic side clamping device

Gamybos metai: 2024, Sąlyga: naujas, mašinos/transporto priemonės numeris: KU 2400, Die Kohlstrunkentferner-Maschine ermöglicht das Ausschneiden des Strunks aus dem Kohlkopf oder häufiger das Zerkleinern des Strunks (dadurch kann das Rohmaterial zu 100 % verwendet werden, was sich zudem positiv auf die Qualität des Sauerkrauts auswirkt). Die Maschine ist mit einer kombinierten elektrischen und pneumatischen Antriebstechnik ausgestattet. Allgemeine Merkmale: • Alle mit dem Produkt in Berührung kommenden Teile bestehen aus lebensmittelechten Materialien • Leistungsfähigkeit: bis zu 2.400 Köpfe pro Stunde • Zwei Strunkentferner-Linien • Auch für das Schneiden von unregelmäßig geformten Kohlköpfen geeignet • Einfache Reinigung, kann mit Niederdruckwasser gewaschen werden Dkedpfx Aoffwfyob Ssg • Optional mit feststellbaren Rollen für einen einfachen Transport ausstattbar • Kann sowohl eigenständig betrieben werden als auch in Linie mit dem Kohlzerkleinerer SS80 (7.500 kg/h) • Auf Anfrage sind verschiedene elektrische Anschlüsse und Standards verfügbar

Sąlyga: geras (naudotas), Gamybos metai: 2014, Kaffee-Kapsel-Füll- und Verpackungsmaschine Vollständig und in gutem Betriebszustand Zuführung über oberhalb angebrachten Vorratsbehälter. Automatischer Inline-Abfüller Leistung: 300 Packungen pro Stunde Komplett mit Siemens-Touchscreen-Steuerung Dkodoucf S Tspfx Ab Sjg Heißschmelz-Kartonverschluss

Sąlyga: naujas, Cutting range at 90°: round 510 mm Dkodpfx Asd Iipmjb Seg Cutting range at 90°: square 450 mm Cutting range at 90°: rectangular 650 x 450 mm Blade speed: 15 - 100 m/min Table height: 844 mm Bandsaw blade dimensions: 5320 x 34 x 1.1 mm Total power requirement: 3.0 kW Machine weight approx. 2.1 t Space requirement approx. 1.9 x 2.87 x 1.3 m SPECIAL OFFER PRICE!!! 2-Column Double Miter Bandsaw K-tech DG 62/45 HA-I - 2-column miter saw - Robust, yet easy to operate - Material height sensor (automatic cut start detection) - Smooth operation thanks to angled cutting, feed regulator, and cutting pressure regulator - Heavy-duty material infeed roller - Removable chip tray (for cleaning) - Energy-saving and low-vibration due to angled cutting - Ergonomic, safe, and free-standing control panel - Frequency-controlled saw drive 15 - 100 m/min. - Hydraulic cutting pressure control valve - Hydraulic control of saw frame and vice - LEDs for monitoring all safety functions - Large-dimensioned flywheels (520 mm) each - Clear miter adjustment up to 60° Semi-automatic operation: 1. Clamp material 2. Saw starts 3. Rapid downfeed to material start or direct cutting for serial cuts 4. Saw blade off 5. Raise frame just above the material 6. Vice opens