Obliavimo staklės ir frezavimo staklės

WEINIG Hydromat 25

Būklė: labai geros būklės (naudotas), darbinis plotis: 250 mm, obliavimo aukštis: 140 mm, ašies skersmuo: 50 mm, obliavimo plotis: 250 mm, darbinio aukščio: 140 mm, padavimo variklio galia: 30 000 W, veleno greitis (maks.): 6 000 aps./min, aukščio reguliavimo tipas: hidraulinis, įvesties srovės tipas: trifazis, ašies skaičius: 9, įėjimo dažnis: 50 Hz, Weinig Hydromat 25 9 spindles, Working width: 250 mm, Working height: 140 mm, Spindle diameter: 50 mm, Feed: 30 kW / 6 - 100 m/min, Spindle arrangement: Lhodpfx Agoq Au Tlsfod 1-Bottom (11 kW) - with hydro clamping 2-Right (9 kW) 3-Left (11 kW) 4-Right (9 kW) 5-Top (15 kW) - with hydro clamping 6-Bottom (7.5 kW) - with hydro clamping 7-Top (7.5 kW) - with hydro clamping and straight jointer 8-Top (11 kW) - with hydro clamping and straight jointer 9-Bottom (11 kW) - with hydro clamping and straight jointer 11 powered rollers in the table

Būklė: naudotas, Gamybos metai: 2021, pjūklo disko skersmuo: 800 mm, sukimosi greitis (min.): 1 450 aps./min, galia: 5,5 kW (7,48 AG), Chop Saw AS Very good, well-maintained condition Saw blade diameter: 800 mm. Robust steel tube frame. High-performance saw motors. Pneumatic material clamps (3 pcs., vertical). Two-hand safety operation. Coolant system. Ledpfx Agjd Szf Njfjhd Protective cover. Optionally with length measuring system or automatic positioning system. Available as a saw-drilling or saw-punching automatic machine on request.

Būklė: naudotas, Verčių skaičius: 5 vnt. Darbo plotis: 250 mm Obliavimo aukštis: 160 mm Ledpfxjw R S T Aj Agfshd Didelės spartos obliavimo ir profiliavimo automatas Weinig H25 skirtas keturpusiam šlapių (šviežiai pjautų) lentų obliavimui ir profiliavimui. Nuotraukose matoma faktinė įrenginio būklė. Be kita ko, sumontuotos kelios originalios naujos Weinig dalys, o stalai/stabdžiai buvo peršlifuoti ir iš naujo padengti. Užbaigimui reikalingos papildomos naujos dalys. Jos bus užsakomos atsižvelgiant į kliento pageidavimus po užsakymo pateikimo. Valdymo pultas naudojamas bandymams ir yra laikinas. Velenas 1: apačioje (7,5 kW) Velenas 2: dešinėje (11 kW) Velenas 3: kairėje (11 kW) Velenas 4: viršuje (15 kW) Velenas 5: apačioje (bus patikslinta) Varomieji stalviršio ritinėliai: Taip Stalviršio plokštės: peršlifuotos ir iš naujo padengtos (grūdintos) Padavimo pavara: 15 kW, hidraulinė

Būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, obliavimo aukštis: 190 mm, ašies skersmuo: 50 mm, obliavimo plotis: 250 mm, bendras svoris: 10 000 kg, Four-sided planer Weinig Hydromat H25N with 100 m/min feeder - German manufacture - Hydraulic feed up to 100 m/min - Suitable for wet wood - Infeed table TECHNICAL SPECIFICATIONS: Planing width: 250 mm Planing height: 190 mm Spindle diameter: 50 mm Electric height adjustment 1st bottom spindle: 15 kW 2nd right spindle: 7.5 kW 3rd left spindle: 15 kW 4th right spindle: 7.5 kW 5th top spindle: 7.5 kW 6th top spindle: 15 kW 7th bottom spindle: 7.5 kW 8th universal spindle 1800: 7.5 kW Infinitely variable feed speed up to 100 m/min Feed pump motor power: 22 kW Nine feed rollers on the table, of which three are before the first cutterhead Seven top steel feed rollers Four top rubber feed rollers Pneumatic pressure system Jointer on spindles 1-6-7 Automatic table lubrication Lhsdpfx Agjn Slk Uofed Infeed table: 3000 mm Infinitely variable speed adjustment up to 100 m/min Two top pneumatic rollers Six bottom feed rollers Minimum workpiece length: 650 mm Transport dimensions: 11000x2400x2000 mm Weight: 10 t

Būklė: naudotas, Velenų skaičius: 10 vnt. Darbinis plotis: 230 mm Obliavimo aukštis: 160 mm Pavaros variklis: 5,5 kW Pavaros greitis: 6-36 m/min. Weinig Unimat 23EL obliavimo ir profiliavimo automatas – skirta medienos keturpusiam obliavimui ir profiliavimui, su mobiliu velenu automatiniam reguliavimui ir griovelio stalu trumpiems bei lenktiems ruošiniams, taip pat su ilgu tiesinimo stalu. Velenas 1: apačioje / 5,5 kW / 40 mm Velenas 2: dešinėje / 11 kW / 40 mm Velenas 3: kairėje / variklis bendras su 2-uoju velenu / 40 mm Velenas 4: dešinėje / 11 kW / 40 mm Velenas 5: kairėje / 5,5 kW / 40 mm Velenas 6: viršuje / 11 kW / 40 mm Lhedpfx Agew H Iv Tefjd Velenas 7: apačioje / 11 kW / 40 mm Velenas 8: viršuje / 7,5 kW / 40 mm Velenas 9: apačioje / 7,5 kW / 40 mm Velenas 10: universalus / 4 kW / 40 mm

Būklė: labai geros būklės (naudotas), Gamybos metai: 1979, working width 250mm working height 140mm 8 heads 3 toothed rollers in the infeed table head arrangement: bottom/right/left/right/left/top/top/bottom infinitely variable feed speed up to 100 m/min spindle diameter 50mm spindles supported on both sides Lhodpfsx Sw T Sjx Agfsd feed on cardan shafts spindle speed 6000 rpm pneumatic pressure of feed rollers adjustment of heads in two axes cast iron frame

Būklė: labai geros būklės (naudotas), Gamybos metai: 1979, working width 250mm working height 140mm 8 heads 3 toothed rollers in the infeed table head arrangement: bottom/right/left/right/left/top/top/bottom infinitely variable feed speed up to 100 m/min spindle diameter 50mm Lhedpfxeww H Rws Agfsd spindles supported on both sides feed on cardan shafts spindle speed 6000 rpm pneumatic pressure of feed rollers adjustment of heads in two axes cast iron frame

Būklė: naudotas, Maximum cutting width: 310 mm Maximum cutting height: 125 mm Saw blade diameter: 500 mm Motor power: 5.5 kW SALVAMAC LEGEND 500 – The semi-automatic under-table crosscut saw ----- Maximum cutting range: 220x125 / 260x100 / 285x80 / 310x50 mm. When cutting stacked boards, max. height: 100 mm. The frame is entirely constructed from thick-walled, reinforced, fully painted steel. Solid floor mounting system with flanged steel feet for the mounting hole. Two-hand safety cutting control positioned ergonomically. Saw motor power: 5.5 kW. Adjustable cutting speed via pneumatic regulator. Maximum system for weight balance and durability. Shock-absorbing system. Independent pneumatic adjustments for adaptation to different processing types. Durable and easily replaceable saw blade guide bar. TCT circular saw blade, diameter 500 mm, Z=108. Pneumatic upper workpiece hold-down with electro-pneumatic control. Pressing system operates via innovative ball bearings with dual dust protection and automatic lubrication system. CE-compliant electrical system. CE-certified models must be equipped as standard with infeed and outfeed support tables/roller conveyors of at least 1 meter in length. Technical Specifications: ----- Maximum cutting cross section, mm: 220x125, 260x100, 285x80, 310x50 Saw blade motor power: 5.5 kW Saw blade diameter: 500 mm Saw blade type: TCT Z=108 Saw blade speed: 2800 rpm Lhedpfx Agsv Uq Tlefjd Air consumption per cycle: 5 Nl Extraction connections: 1 x 120 mm / 1 x 100 mm Air pressure: 6 - 8 bar Voltage: 400 V / 50 Hz, 3-phase Working table height: 900 mm ± 20 mm Color tone: RAL 7035 Machine additionally equipped with: ----- 2 m roller conveyor (right of saw) with non-driven rollers: Painted steel frame with galvanized rollers. Load capacity: 230 kg, diameter: 60 mm, spacing: 250 mm, width: 320 mm. Area between rollers enclosed with painted steel. Including side guide. 2 m roller conveyor (left of saw) with non-driven rollers: Painted steel frame with galvanized rollers. Load capacity: 230 kg, diameter: 60 mm, spacing: 250 mm, width: 320 mm. Area between rollers enclosed with painted steel. Including side guide, stop guide, and millimeter scale. 2 robust pneumatic stops, width 200 mm ----- Total price ex works: on request! ----- Pictures and video not original; show an identical model. Additional options (e.g., longer infeed/outfeed tables, stop systems) available on request! (Technical data according to manufacturer's information—subject to change!)

Būklė: labai geros būklės (naudotas), Planing width: 250 mm Planing height: 120 mm Lsdpfx Aowlk E Isgfshd 1. Bottom spindle 2. Right spindle 3. Left spindle 4. Right spindle 5. Top spindle 6. Bottom spindle 7. Bottom spindle 8. Universal spindle 360° - Hydraulic feed: 6–60 m/min - 10x powered table rollers - Spindle diameter: 50 mm

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1981, WEINIG Hydromat H25R, S/N 2603-624, year 1981 with walk-in sound insulation cabin KASCHWIG – ALMOST NEW from year 2017 • Short infeed table with heavy-duty 6-roller infeed 1st spindle bottom 11.0 kW 2nd spindle right 11.0 kW Lhedpfx Aotkt Tpogfjd 3rd spindle left 11.0 kW 4th spindle top 15.0 kW 5th spindle bottom 11.0 kW 6th spindle bottom 11.0 kW • Hydraulic feed, 6–60 m/min • Feed motor 22.0 kW • 4 driven table rollers • Spindle diameter 50 mm • Automatic table lubrication • Spindles 1 + 4 + 5 + 6 with counter bearing • Spindles 1 + 4 with straight jointer • Feed rollers 170 mm • Approx. 10 hydro-planing cutterheads • Extraction hood above the machine

Būklė: paruoštas naudoti (naudotas), Linia odzysku złomu z następującymi maszynami: Jedna dwutarczowa krajarka krawędziująca do desek Jedna jednowrzecionowa piła pozioma rozrzynająca Ledpegwqk Sjfx Agfohd System przenośników pomiędzy maszynami w komplecie.