Formier

Weinig AG Unimat 23 8 heads

Būklė: labai geros būklės (naudotas), Four-Side Planer Weinig Unimat 23 EL Working width: 230 mm Working height: 160 mm Spindle arrangement: Bottom – 5.5 kW Right – 4 kW Left – 5.5 kW Right – 4 kW Top – 11 kW Bottom – 5.5 kW Top – 7.5 kW Bottom – 7.5 kW Feed speed adjustable via variator: 6–36 m/min Feed driven by cardan shaft Table with powered rollers Pneumatic pressure units Iajdpfx Alsrb An Usrsu CE certificate Year of manufacture: 2003

Būklė: naudotas, Weinig Unimat 23 Technical data Working width: 30 - 230 mm Working height: 19 - 200 mm mounted on platform bottom – right – left – top – top/bottom without infeed machine only The machine has been dismantled and is available immediately. Transport can be arranged. Iaedpfxoncc Igj Alrsu

Būklė: naujas, Stand width: 2000 x 1000 mm Retraction speed: 150 mm/s Weight approx.: 35,000 kg Stroke: 800 mm Total power requirement: 30 kW Installation height: 1000 mm Rapid traverse: 120 mm/s Pressure: 500 bar Work table: 2500 x 1500 mm Working speed: 12 mm/s Dimensions (LxWxH): 2500 x 2700 x 5400 mm We also build special presses tailored to your requirements. DETAILS: 4-column press, 500 tons Iedpfxed Aca Ao Alrjau Capacity: 500 tons (at 250 Bar – 510 tons) Control: Automatic via two-hand operation with key switch selection 1. Manual setup mode via control panel 2. Automatic single-stroke mode via two-hand operation without draw cushion Main cylinder: Ø500 mm Auxiliary cylinders: 2 pcs. Ø120 x 80 mm (operates in parallel with main cylinders) Motor: 37 kW – 50 hp Pump: 100 cc = 150 l/min, REXROTH axial piston pump Cylinder speed: Forward: 150 mm/s, Return: 170 mm/s, Pressing phase: 15–8 mm/s Working area: 2500 x 1300 mm (table & ram plate with T-slots) (Drawing with T-slot dimensions provided by customer) Distance between columns: 2000 x 800 mm Installation height: 1000 mm (max. distance between table & ram plate) Stroke length: 800 mm (adjustable via linear scale) Columns: Ø180 mm Hydraulics accessories: Hydraulic tank with control block & valves (fully REXROTH) Tank capacity: 1500 l, Oil quantity: 1200 l Advance valve: 2 pcs Hydraulic & mechanical ram safety devices Pressure regulation via PLC (min. pressure 60 tons) Air cooler Hydraulic accessories mounted above press Auxiliary motors Auxiliary pump Filter: Rexroth Additional valve for spring-loaded opening Speed adjustment via display Hydraulic accessories atop the press Safety rail around hydraulic tank Side climbing ladder Control accessories: Control: SIEMENS S7 1214 Safety PLC: SICK Swiveling control panel Ethernet connection for remote maintenance Two-hand control (movable, sufficient cable length for operation from front & rear) Main control cabinet 12” Beijer PLC display Photoelectric sensors front & rear – SICK 1000 + 150 mm Linear scale for stroke length adjustment (Novatechnik) Soft starter for main motor 8 free input & output ports Work area lighting Side window door in working area, secured with limit switch (400 x 600 mm) Table height: 1000 mm (floor to top of table plate) Total weight: approx. 35,000 kg Total dimensions (LxWxH): approx. 2500 (incl. hydraulics) x 2700 x 5400 (incl. railing) mm Foundation: absolutely required The price is valid until 30.12.2022! Operator training and commissioning are included in the price.

Būklė: geras (naudotas), gręžimo gylis: 1 500 mm, padavimo ilgis X ašis: 2 000 mm, padavimo eiga Y ašimi: 1 300 mm, padavimo ilgis Z ašis: 1 500 mm, Manufacturer: TBT Tiefbohrtechnik Model: BW 250-S Control: SIEMENS 840D Year of manufacture: 2007 Drilling, milling, and tapping for heat exchanger tube sheets and plates Swiveling A-axis: +25 to -15 degrees Filtration and coolant system: 1000 L Chip conveyor: 2000 x 1200 mm, discharge height Milling tool changer tower station: 20 positions ELB drilling capacity: 3 - 35 mm Milling capacity: 250 cc/min Feed rates all axes (X-Y-W-Z): 15,000 mm/min Cutting hours: approx. 15,000 Comes with an extensive tooling package Specifications Metric | US Standard Max. drilling Ø in steel: 40 mm Drilling depth: 1,500 mm X-axis: 2,000 mm Y-axis: 1,300 mm Z-axis: 1,500 mm W-axis: 750 mm Table load capacity: 15,000 kg Table dimensions (L x W or Ø): 1,600 x 1,200 mm Spindle mount: HSK 63 Mk Spindle power: 11 kW Speed: 8,000 rpm Dimensions (approximate) Length: 7,200 mm Width: 7,800 mm Height: 4,250 mm Weight: 23,000 kg Iaodpfsv A Uw Dsx Alrou Please note: The information on this page has been provided to the best of our knowledge and wherever possible, sourced from the manufacturer. The information is given in good faith, however accuracy cannot be guaranteed. Accordingly, these details do not constitute representations or contract terms. We recommend verifying all critical details independently.

Būklė: labai geros būklės (naudotas), Four-side planer Weinig Unimat 23 Working width: 230 mm Working height: 160 mm Number of spindles: 5 Spindle arrangement: Bottom: 5.5 kW Right Left: 7.5 kW Top: 11 kW Bottom: 5.5 kW Pneumatic material hold-downs divided into 4 sections Iodpfetxxwdsx Alrjau Feed speed adjustable via variator: 4–24 m/min Infeed table length: 1980 mm Drive via cardan shafts Heavy-duty soundproof cabin Machine dimensions: 380 x 226 x 178 cm (H) CE certificate

Būklė: paruoštas naudoti (naudotas), Number of spindles: 6 units Working width: 230 mm Planing height: 120 mm Jointer table length: 2000 mm Feed motor: 4 kW Feed speed: 5-24 m/min 1 WEINIG Planer and Moulder Unimat 23 E ----- 6 spindles (2 of which are right-hand), reinforced motors, 8,000 rpm, ATS control system Machine will be cleaned and function-tested prior to delivery Working width: 20 - 230 mm Working height: 8 - 120 mm 1st spindle, bottom, 5.5 kW (motor replaced) ----- Diameter: 40 mm Speed: 6,000 rpm Tool swing diameter: 125 - 180 mm Rabbetting unit incl. tooling Hardened table insert in front of 1st bottom spindle 2nd spindle, right, 12.1 kW (motor replaced) ----- Shared motor with left vertical spindle Diameter: 40 mm Speed: 8,000 rpm Tool swing diameter: 112 - 250 mm Max. tool diameter behind fence line: 203 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm 3rd spindle, left ----- Shared motor with 2nd spindle Diameter: 40 mm Speed: 8,000 rpm Isdpfx Aexz Hh Uslrjau Tool swing diameter: 112 - 200 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm Pressure shoe in front of left spindle, incl. spring-loaded side roller pressure 4th spindle, right, 8.3 kW (motor replaced) ----- Diameter: 40 mm Speed: 8,000 rpm Tool swing diameter: 112 - 250 mm Max. tool diameter behind fence line: 203 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm 5th spindle, top, 7.5 kW ----- Diameter: 40 mm Speed: 8,000 rpm Tool swing diameter: 112 - 200 mm Max. profiling depth: 35 mm Axial adjustment: 45 mm Split pressure shoe in front of top spindle, adjustable to tool swing diameter and swivelling away from tool, spring-loaded 6th spindle, bottom, 4.0 kW ----- Diameter: 40 mm Speed: 6,000 rpm Tool swing diameter: 112 - 250 mm Max. profiling depth: 15 mm Axial adjustment: 45 mm Spindles - General ----- All profiling spindles with high concentricity. Lubrication points for axial spindle movement. Feed system ----- Motor with mechanical brake, 4 kW Mechanical feed steplessly adjustable 5–24 m/min Infeed roller in front of 1st bottom tool, pneumatically controlled high/low Durofer pointed tooth rollers (Weinig patent) with depth limiter and self-cleaning Feed roller adjustment relative to left spindle, axial 35 mm Machine electrics ----- Operating voltage: 440 V (voltage range 380 - 420 Volt), 50 Hz Machine base, tables, and fences ----- Jointer table 2.0 m long (incl. straight edge) Manual Waxilit pump for table de-resining One powered rubber roller (spring-loaded in outfeed table) Two powered rollers in machine table, hardened Machine operation ----- Pressure shoe in front of top spindle with mechanical digital indicator Ejection after top spindle with mechanical digital indicator ATS/system, automatic 2-axis positioning for spindles no. 3 and 5 Min. working height: 12 mm Electric height adjustment for top spindles and feed Centralized lubrication points located at machine front Electronic digital displays at spindle 3 and 5 (axial), spindle 6 (radial), and spindle 4 (axial and radial) Safety and sound insulation ----- Full safety enclosure Easily high...

Būklė: labai geros būklės (naudotas), Gamybos metai: 2008, veikimo valandos: 8 000 h, Four-sided planer Weinig Model: Powermat 400 LE – machine with grooved table Year of manufacture: 2008 Operating hours: 8,000 Maximum working width: 230 mm Maximum working height: 120 mm The machine is equipped with 5 spindles featuring the Powerlock system Spindle configuration: - bottom: 5.5 kW - left and right: 7.5 kW each - top: 7.5 kW - bottom: 7.5 kW Spindle speed: 6,000 rpm Feed speed smoothly adjustable via inverter: 5 – 30 m/min Electronic spindle positioning – Memory system Ijdpswybrnjfx Alroau The machine is in very good technical condition, complete with cutterheads.

Būklė: naudotas, Gamybos metai: 2004, Planer and moulding machine Weinig Powermat 2000 PowerLock Technical specifications Working width: 30 - 300 mm Working height: 19 - 200 mm First bottom spindle: Iedpfxsunbrbj Alreau Motor with brake: 18.5 kW Speed: 8000 rpm Tool diameter: 125 - 180 mm Second spindle: First right spindle: Motor with brake: 15 kW Tool diameter: 93 - 200 mm Third spindle: First left spindle: Motor with brake: 15 kW Tool diameter: 93 - 200 mm Fourth spindle: First top spindle: Motor with brake: 37 kW Tool diameter: 93 - 200 mm Fifth spindle: Second bottom spindle: Motor with brake: 22 kW PowerLock tool holder Speed: 8000 rpm Tool diameter: 93 - 225 mm Feed system: Frequency-controlled feed, infinitely variable 6 - 36 m/min.

Būklė: geras (naudotas), WEINIG UNIMAT 23EL, 9 velenų Trumpas padavimo stalas 1: Apatinis 7,5 kW 2: Dešinysis 11 kW 3: Kairysis 7,5 kW 4: Dešinysis 7,5 kW 5: Viršutinis 11 kW 6: Apatinis 7,5 kW 7: Viršutinis 11 kW 8: Apatinis 11 kW 9: Universalus 7,5 kW, pasukamas 360° Velenų apsukos: 8000 aps./min Padavimo variklis 7,5 kW Maksimali padavimo sparta: 44 m/min Ijdpfx Alsyahuberjau 13 x varomi viršutiniai padavimo ritinėliai 6 x varomi stalo padavimo ritinėliai Automatinis stalo tepimas Pneumatiniai šoniniai prispaudimo ritinėliai Pneumatinis prispaudimas ties 6 ir 8 ašimis Matmenys: apie 5000 x 2000 x 1800 mm Svoris: apie 6500 kg Dulkių nusiurbimo jungtys: 9 x 140 mm skersmens Ištraukimo kolektorius įeina Pilna dokumentacija pridedama

Būklė: visiškai atnaujintas (naudotas), Rekonstruotas Weinig U22N modelio obliavimo staklės. 22 cm pločio stalas su grioveliuotu paviršiumi. 8 velenai su tokia sudėtimi: - Apatinis – 4 kW Isdpfex Syrkjx Alrjau - Dešinysis – 5,5 kW - Kairysis – 5,5 kW - Dešinysis – 7,5 kW - Viršutinis – 7,5 kW - Apatinis – 5,5 kW - Viršutinis – 7,5 kW - Universalus – 5,5 kW Traukimo variklis – 4 kW Keliamo/nuleidimo variklis – 0,85 kW Bendra galia – 53,35 kW Automatinis šoninis padavimas. Labai universali mašina, tinkama tiek ilgoms detalėms (su šoniniu padavėju), tiek trumpoms detalėms (dėl arti esančio traukimo mechanizmo ir grioveliuoto stalo). Puiki techninė būklė. Veleno skersmuo: 400 mm.