Ekscentriškas spauda - vienas stulpelis

WEINGARTEN XLV II

Gamybos metai: 1990, Sąlyga: naudotas, Pressure: 75 t Throat depth: 300 mm Stroke: 8 - 110 mm Table size: 750 x 600 mm Ram adjustment: 75 mm Ram surface: 430 x 230 mm Passage opening in table: 250 x 150 mm Ram bore: 40 mm Strokes per minute: 60 + 90 spm Machine weight: approx. 4.4 t Total power requirement: 4.5 - 6.8 kW Space requirement: approx. 1.95 x 1.1 x 2.35 m Distance table/ram at bottom stroke, ram down: 19 mm Distance table/ram at top stroke, ram up: 380 mm Equipment: - with hydraulic clutch-brake combination, new hydraulics and oil cooler - with gear drive in oil bath - fixed table prepared for attaching tool change consoles - 2 roller rails in table - mechanical overload in ram (shear plate) Fjdpfxed Nl E Us Admegk The following work will be carried out on the machine / partial refurbishment: - Machine will be completely disassembled, inspected, seals replaced, defective parts exchanged, etc. - Machine will be repainted - New Balluff cam switchgear - New hydraulic unit with oil cooler for clutch - New Vogel central lubrication - New control cabinet with touch panel and ABB safety control - Current safety inspection (German UVV) including brake time measurement

Sąlyga: naudotas, Gamybos metai: 1979, mašinos/transporto priemonės numeris: 5255, Pressure: 30 t Stroke rate: 100-600 strokes/min Fedpfscxxu Nex Admegk Sheet width: 120 mm Table size: 540 x 450 mm Bruderer precision double roller feed: left Adjustable stroke range: 16-40 mm Distance between columns: 330 x 300 mm Total power requirement: 5.5 kW Machine weight approx.: 3 t Space requirement approx.: 2.10 x 1.65 x 0.75 m High-speed punching press in 3-column design, equipped with air cooler, piece counter, separate control cabinet, air clutch, BRUDERER precision double roller feed (left)

Sąlyga: labai geros būklės (naudotas), Here we offer you a Zwick / Roell universal testing machine / table-top tensile testing machine. Zwick / Roell Material Testing Machine Model: BDO-FB0.5TH Test load capacity tension/compression: 500 N Height: 1565 mm, Width: 292 mm, Depth: 469 mm Test area width: unlimited Test area depth: 100 mm Max. travel without accessories: 1266 mm PC or printer interface: RS 232 Required PC connection (for PC operation): COM 1 Power supply: 115/230 V (PH, N, PE) Nominal power: 0.4 kVA Fgsdpfx Adsd Sr S Iemok Mains frequency: 50/60 Hz Weight: 47 kg Type: BDO-FB0.5TH Condition: used Scope of delivery: (see image) (Subject to modifications and errors in the technical data; all information is non-binding!) If you have further questions, we are happy to answer them by phone.

Gamybos metai: 2008, Sąlyga: naudotas, Pressure: 315 t Stroke: 40–200 mm Stroke rate: 20–100 strokes/min Ram adjustment: 120 mm Ram area: 2000 x 1100 mm Table area: 2000 x 1200 mm Pass-through opening in table: 1700 x 250 mm Shut height (ram up, slide adjustment up): 500 mm Fgodpfx Aerdi Dledmok Lateral frame clearance: 820 x 650 mm Total power requirement: 45 kW Machine weight: approx. 44 t Hydraulic clutch-brake combination Hydraulic overload protection in the ram Semi-automatic stroke adjustment Motorized ram adjustment Stroke rate frequency controlled Central grease lubrication for guides Oil recirculation lubrication Ram counterbalance cylinder Front/rear safety door Hydraulic die clamping system Extendable table plate Hydraulic roll block rails in the table Feed: Helmerding EWH800/150 (V-1341-6518) Strip width: 100–800 mm, strip thickness: 0.5–6.0 mm, max. strip cross-section: 1600 mm² Air blow-off/intermediate venting, height adjustment via gear motor Straightener: R-70/800/9-S (R-1343-6518) Strip width: 100–800 mm, strip thickness: 0.5–4.0 mm Max. strip cross-section: 1600 mm² at 450 N/mm² Straightening speed, frequency controlled up to 25 m/min Strip feed assist: transfer table with hydraulically adjustable separation wedge Hold-down, hydraulically adjustable Strip edge guide: 1 pair lateral roller guides, adjustable via handwheel Feed rollers: 2x rollers, Ø140 mm, pneumatically adjustable Straightener: 9x rollers, Ø70 mm, adjustable manually via handwheel Uncoiler: HE-4/800/MOT/HYD (H-1342-6518) Strip width: 100–800 mm Max. load: 4 t Coil inner diameter: Ø508 mm Coil outer diameter: Ø1000–1600 mm Drive, frequency controlled Limiting arms Hydraulic expansion Hydraulic hold-down arm

Gamybos metai: 1965, Sąlyga: naudotas, Pressure: 150 t Fgjdpfx Adecubatjmjk Throat depth: 550 mm Stroke: 10 - 140 mm Table area: 1180 x 980 mm Strokes per minute: 40 spm Installation height: 500 mm Ram area: 1040 x 800 mm Ram adjustment: 70 - 150 mm Pin hole (depth x diameter): 435 x 55 mm Power requirement: 15 kW Machine weight: approx. 12 t Space requirement: approx. 3 x 1.7 x 3 m - with auxiliary brake - Ram weight compensation - Motorized ram adjustment - Centralized grease lubrication (manual) - Break-out plate - T-slot clamping plate - Safe for manual loading operations - Operating manual available

Sąlyga: naudotas, Gamybos metai: 1970, mašinos/transporto priemonės numeris: 120895, Pressure: 63 t Throat depth: 250 mm Stroke: 8 - 100 mm Strokes per minute: 120 spm Table size: 715 x 500 mm Installation height: 330 mm Ram adjustment: 63 mm Clamping plate: 700 x 480 mm Fgodpfx Adsfx Hv Homok Passage opening in table: 240 mm Passage opening in clamping plate: 110 mm Ram clamping surface: 450 x 280 mm Machine weight approx.: 5.5 t Space requirement approx.: 1.2 x 1.7 x 2.7 m Single-column eccentric press with tiltable design via hydraulic adjustment system, tiltable in 4 stages, pass-through opening to the rear (325 x 500 mm) or underneath (360 x 160 mm), centralized lubrication via hand pump, additional clamping plate (700 x 480 x 850 mm), two-hand operation, foot release configurable, mode selector switch for continuous or single stroke setup, emergency stop switch, piece counter, various accessories.

Sąlyga: naudotas, Pressure: 55 t Throat depth: 250 mm Stroke: 10–90 mm Table size: 640 x 495 mm Strokes per minute: 120 spm Ram adjustment: 55 mm Ram area: 290 x 210 mm Ram bore: 40 H7 mm Pass-through opening in table: 220 x 190 mm T-slots: 22 mm Clamping plate: 620 x 485 x 65 mm Total power requirement: 4.5 kW Machine weight: approx. 3.4 t Space requirements: approx. 1.5 x 1.2 x 2.2 m - Pneumatic clutch-brake combination Fodjcp Apyopfx Admsgk - Vogel central lubrication system - Balluff cam switchgear - Height-adjustable table - Mechanical ram overload protection (shear plate) - Control cabinet with touchscreen - Foot switch

Gamybos metai: 1980, Sąlyga: naudotas, Pressure: 80 t Outreach: – mm Stroke: 50 mm Table surface: 875 x 695 mm Ram surface: 350 x 355 mm Ram adjustment: 71 mm Strokes per minute: 30 – 90 Gap width: 450 mm Machine weight approx. 6.2 t Space requirement approx. 2.0 x 2.1 x 3.2 m Fgsdpedlcy Hefx Admek Installation height (stroke down, ram adjustment up): 480 mm Further information: - The machine is currently being partially overhauled - The machine has been newly equipped with the following components: * Separate free-standing control cabinet with touchscreen, including wiring * New paintwork of individual components in disassembled state After the partial overhaul, the machine is safe for manual loading operation at open tools. Before delivery, a current UVV safety inspection and brake time measurement will be carried out.

Sąlyga: naujas, Pressure: 40 t Outreach: 225 mm Stroke: 8–84 mm Table size: 580 x 450 mm Ram adjustment: 55 mm Strokes per minute: 130 spm Ram area: 185 x 180 mm Ram bore: 40 H7 mm Table through-hole: 210 x 170 mm T-slots: 22 mm Clamping plate: 570 x 450 x 65 mm Total power requirement: 3.5 kW Machine weight approx. 2.7 t Space requirement approx. 1.4 x 1.1 x 2.1 m - Hydraulic clutch-brake combination - Central lubrication (Vogel) - Cam control system (Balluff) - Control cabinet with touchscreen - Height-adjustable table Fgodpfjb U Hwtjx Admok - Foot switch

Sąlyga: naujas, Pressure: 25 t Throat depth: 200 mm Stroke: 4 - 80 mm Table size: 520 x 400 mm Strokes per minute: 160 spm Continuous operating energy: 1370 Nm Single stroke energy: 2740 Nm Stroke adjustment: 4 - 80 mm Ram adjustment: 40 mm Ram surface: 160 x 160 mm Fgjdpfxeb U Hwno Admek Passage opening in table: 200 x 150 mm Clamping plate: 500 x 380 x 60 mm Passage opening in table: 80 mm Machine weight approx. 1.9 t - Ortlinghaus hydraulic clutch-brake combination - Vogel central lubrication - Balluff cam controller - Height-adjustable table - Control cabinet with touchscreen - Foot switch