Ekscentrinis presas - viena kolona

WEINGARTEN ARP 80 (UVV)

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Overhauled: 2024 Year of manufacture: 1994–2000 Saw blade: 560 mm Motor power: 6.5 / 8.0 kW Speed: 1500/3000 rpm Cutting speed: 2100 – 4200 m/min Saw height adjustment: electronic Working range square max.: 170x170 mm Working range flat max.: 300x150 mm Working range round max.: 200 mm Saw feed: 0 – 40 mm/s, continuously adjustable Cut length: 5–950 mm (9999 mm with multiple stroke) Feed rate max.: 500 mm/s Weight: approx. 1900 kg Dimensions LxWxH: 2200 mm x 2700 mm x 1950 mm Guedpfsuiy Hrox Apyjh After the retrofit, the machine is in a like-new condition, both technically and visually. Thanks to its equipment and construction, the machine can be used very efficiently for a wide range of applications. The programmed HMI control ensures simple and highly profitable operation of the system. The soundproof cabin minimizes noise emissions. The machine is fully overhauled in-house according to customer requirements. Among others, the following components are renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI operator interface - Replacement of ball screw - Replacement of servo motor and servo drive - New electrical components - New pneumatic lines - New pneumatic components - Overhaul and/or replacement of all pneumatic cylinders - Renewal of valve island - Optimization of extraction performance - Overhaul of minimum quantity lubrication system - Replacement of general wear parts - Overhaul of the cabin Additionally, the machine is equipped with: - Soundproof cabin - Kerf extension (for high-quality cut surfaces without return marks) - Fully electronic height adjustment Warranty: Unless otherwise agreed, we provide a 6-month warranty on all overhauled or replaced parts. Labor time and wear parts are excluded from the warranty. Optional equipment: - Mass clamping system for parallel sawing of multiple workpieces - Flat magazine for automatic feed of up to 6 m long bar stock - Roller conveyors for bar stock - Reinforced motor 18.0 kW (frequency-controlled) - Delivery and installation at your site - Training of your personnel

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2018, Max. profile length for 3-sided machining: 7,600 mm, Y-axis: 845 mm, Z-axis: 620 mm, max. traverse speed X-axis: 63 m/min, max. traverse speed Y-axis: 60 m/min, max. traverse speed Z-axis: 60 m/min, swivel range A-axis: -90°, 0°, +90°, max. spindle speed: 24,000 rpm, spindle power: 11 kW S1, machining directions: top/front/rear/left/right, positioning accuracy: 0.1 mm/m, tool holder: HSK-63F, disc cutter diameter: 120 mm, saw blade diameter: 180 mm, software: eluCam, connected load: 30 kVA, compressed air connection: 7 bar, compressed air consumption: approx. 180 l/min, length: 10,775 mm, width: 3,430 mm, height: 2,950 mm, weight: 4.9 t, operating hours: 1,550 h, standby: 6,300 h. Accessories: length measurement for profile bars, HSK-63F tool holder set, five collet chucks, eight collets, 2-layer length processing with second light barrier, camera system, additional stationary tool magazine for eight tools, barcode scanner for order/operation input and documentation. Regularly serviced, on-site inspection possible. Guedpfxezbb Rrs Apysh

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2024, Completely overhauled: 2024 Control system: Siemens S7 PLC Saw blade max: 500 mm Motor power: 4.0 kW Saw blade feed: 0–40 mm/s, steplessly adjustable Saw blade height adjustment: electronic Working range, square at 90° max.: 130 x 130 mm Working range, flat at 90° max.: 190 x 130 mm Guodpjuiy Ngefx Apyeh Working range, round at 90° max.: 170 mm The machine has been completely overhauled in our facility and is in like-new condition. Among other things, the following components have been renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI operator interface - Conversion to servo-controlled pusher - New electrical components - New pneumatic lines - New pneumatic components - Retrofit to valve manifold - Optimized extraction performance - New minimum quantity lubrication system - Replacement of general wear parts - Refurbishing of the enclosure In addition, the machine features: - Minimum quantity lubrication - Splitter extension (for high-quality cut surfaces without drag marks) - Loading magazine for gentle handling of painted/anodized surfaces - Scrap piece ejection in the pusher - Foldable scrap piece tray Options: - Magazine width: 3,000 mm - Pusher length: 6,000 mm - Pusher length: 8,000 mm - Reinforced motor: 5.5 kW - Multiple clamping device for parallel sawing of several workpieces - Online support connection - Delivery and installation at your site - Training for your staff

Būklė: naudotas, Gamybos metai: 1996, Pressure: 80 t Throat depth: 320 mm Stroke: 6 - 118 mm Strokes per minute: 30 - 80 spm Ram adjustment: 70 mm Table area: 830 x 610 mm Ram area: 650 x 400 mm Frame gap (towards rear): 630 mm Total power requirement: kW Machine weight approx. 8.1 t Space requirement approx. W 1.2 x D 1.9 x H 3.3 m Equipment/features: - with gear drive - fixed table - automatic stroke adjustment - automatic ram adjustment - hydraulic overload protection - ejector - centralized grease lubrication - cover plate for drop hole - stepless speed control via frequency inverter - The machine will be technically overhauled and inspected in our facility and will receive a new control cabinet with safety control system and touchscreen Gjdstycdkjpfx Apyeuh - current accident prevention inspection (UVV) with brake time measurement

Būklė: naudotas, Pressure: 55 t Throat depth: 250 mm Stroke: 10–90 mm Table size: 640 x 495 mm Strokes per minute: 120 spm Ram adjustment: 55 mm Ram area: 290 x 210 mm Gjdpfscp Apyex Apyjuh Ram bore: 40 H7 mm Pass-through opening in table: 220 x 190 mm T-slots: 22 mm Clamping plate: 620 x 485 x 65 mm Total power requirement: 4.5 kW Machine weight: approx. 3.4 t Space requirements: approx. 1.5 x 1.2 x 2.2 m - Pneumatic clutch-brake combination - Vogel central lubrication system - Balluff cam switchgear - Height-adjustable table - Mechanical ram overload protection (shear plate) - Control cabinet with touchscreen - Foot switch

Būklė: naujas, Pressure: 25 t Throat depth: 200 mm Stroke: 4 - 80 mm Table size: 520 x 400 mm Strokes per minute: 160 spm Continuous operating energy: 1370 Nm Single stroke energy: 2740 Nm Stroke adjustment: 4 - 80 mm Ram adjustment: 40 mm Ram surface: 160 x 160 mm Passage opening in table: 200 x 150 mm Clamping plate: 500 x 380 x 60 mm Passage opening in table: 80 mm Gjdpob U Hwnefx Apyjuh Machine weight approx. 1.9 t - Ortlinghaus hydraulic clutch-brake combination - Vogel central lubrication - Balluff cam controller - Height-adjustable table - Control cabinet with touchscreen - Foot switch

Būklė: naudotas, Gamybos metai: 2007, Technical Details: Reach: 640 mm Round steel punching: Ø 26 x 20 mm Punching force: 70 t Total power requirement: 5.5 kW Machine weight approx.: 2.0 t Machine dimensions approx. LxWxH: 2.0 x 1.0 x 1.8 m Hydraulic profile steel shear Shear station: - Max. shearing: 300 x 20 mm / 375 x 15 mm - Mitre cutting max.: 150 x 13 mm Guedpfou Icmhjx Apyoh - Adjustable hold-down, length up to 630 mm Profile station: Processing of round and square profiles, U-profiles, I-beams, and unequal angle bars Angle/profile cutting - Angle steel: Max. 90° cut = 150 x 15 mm, and 45° cut = 80 x 10 mm - U/I-profile = 130 x 65 mm; T-profile = 90 x 12 mm - Maximum section cutting: Round steel Ø 45 mm and square steel 45 mm - Blades with four cutting edges Punching station: - Punching force: 60 t - Throat depth: 640 mm - Table WxD: 1,000 x 600 mm - Maximum punching Ø x thickness: Ø 26 x 20 mm and Ø 57 x 9 mm - Notching (D x W x D): 10 x 45 x 90 mm - Through-hole diameter: Ø 40 mm - Equipment: Stop bar, aluminum angle 100 x 80 x 1,000 mm Notching station: - Table WxD: 430 x 380 mm - Notching: Material thickness 10 mm; width 45 mm; depth 60–90 mm; angle flange 100 x 10 mm Punching: - Table: 600 x 600 mm - Throat depth: 625 mm - Max. bore: Ø 57 x 12 mm - Stroke: 80 mm; strokes/min: 34; punching pressure: 40 t - Stop angle: 200 x 100 mm, L = 600 mm Operation via foot switch For accessories, please inquire.

Būklė: naudotas, Vieno stovo ekscentrinė štampavimo presas WEINGARTEN tipas EV 63 Mašinos Nr. 738 / 61 Pagaminimo metai: 1962 Presavimo jėga: 63 t Iškyša: 260 mm Stalo matmenys: 630 x 530 mm Guedpfxsk S Htxj Apyeh Stalo anga: Ø 210 mm Presavimo galvutės matmenys: 315 x 260 mm Presavimo eiga reguliuojama: 8-100 mm Presavimo galvutės reguliavimas: 63 mm Tvirtinimo kaiščio skylė: Ø 40 mm, su fiksavimo elementu Montavimo aukštis maks.: 450 mm Smūgių dažnis: 115 smūgių/min. Suslėgto oro poreikis: min. 4,5 bar Variklio galia: 4 kW Maitinimas: 380 V, 50 Hz Stalo aukštis nuo grindų: apie 750–900 mm - Elektrinis eigos paleidimas per pakojų jungiklį arba dviejų rankų valdymą - Apkrovos apsauga per lūžtančią plokštę - Sankabos-stabdžio kombinacija su WEINGARTEN frikcine sriegine sankaba ir TDP viršutinės padėties sauga - Priekinis alkūninio veleno atraminis guolis - Presavimo stalas reguliuojamas aukščiu su 2 sriegio velenais - Rankinis centrinis tepimas - Elektros skydas šalia - UVV rankiniam įdėjimui Užimamas plotas (I x P x A): 1750 x 1600 x 2430 mm Svoris: 4,5 t Gera būklė

Būklė: naudotas, Gamybos metai: 1991, Spaudimo galia 1.500 kN Eigos reguliavimas 20 - 132 mm Stūmoklio reguliavimas maks. 90 mm Guodpfjrm Nqmex Apyeh Eigos dažnis 50 / 75 1/min. Papildoma informacija ir nuotraukos pagal užklausą Naudota, presas buvo visiškai išardytas Neveikia, būtinas mechaninis ir elektrinis remontas Šiuo metu presas vėl surinktas mechaniškai

Gamybos metai: 1990, būklė: naudotas, Pressure: 80 t Throat depth: 250 mm Stroke: 5/95 mm Table surface: 805 x 510 mm Distance table/ram at bottom stroke: 400 mm Ram bore diameter: 45 mm Ram adjustment: 100 mm Ram surface: 360 x 300 mm Strokes per minute: 55 spm Total power requirement: 5.5 kW Machine weight approx.: 4 t Space requirement approx.: 0.83 x 1.7 x 2.6 m - Ram weight balance Guodpefn Aqnofx Apyjh The machine will be partially overhauled at our facility next year (disassembly, inspection, new paint, new wiring, new control cabinet).