Smulkintuvas, smulkintuvas, medienos smulkintuvas

Weima WL 6

Būklė: naujas, Gamybos metai: 2026, Weima Single-Shaft Shredder Type WL 6 Power: 18.5 kW Our WL 6 Machine Concept The high-performance WEIMA shredders, with their flexible applications, can process all types of wood materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer waste, etc.) into fuel chips, achieving significant volume reduction of even bulky materials. Operating Principle: The machine is equipped with a large feed hopper and can be loaded either with a conveyor belt or manually. The hopper can be customized to individual requirements and ensures continuous and cost-effective material feeding without the need for manual assistance. Technical Specification WL 6 / 18.5 kW Hedpfxoh Eiw Is Aftonn Hopper opening: 800 x 1,000 mm Hopper volume: 0.9 m³ Working width of rotor: 800 mm Rotor diameter: 252 mm Drive power: 18.5 kW Rotor speed: 80 - 120 rpm Number of knives: 42 pieces Type and size of knives: concave / 40 x 40 mm, reversible cutting crowns Screen perforation: 10-60 mm available (standard 15-20 mm) Paint finish: WEIMA standard RAL 2002 / 7016 Electrical connection: 400 V +/- 5% / 50 Hz Weight: approx. 1,600 kg Included: - Control cabinet (Rittal) with electrical control system (Moeller / Siemens) and star-delta start - Rubber vibration dampers - V - rotor (patented) with integrated knife pockets - Gear limit switch - Pressure bar - Extra robust Weima WAP gearbox - Logspacer (anti-blocking hopper) - Second knife row Available from stock in 54634 Bitburg - Immediately available - Request more information

Būklė: naujas, Technical data: Working width: 1100 mm Sanding belt dimensions: 1120x2150 mm Maximum working height: 160 mm Calibrating steel roller diameter: 150 mm Hjdpfegtm U Ajx Aftonn Rubber roller diameter: 150 mm Sanding pad width: 50 mm Total motor power for both sanding units: 11 kW Sanding belt speed: 16/18 m/s Feed motor power: 0.55 kW Variable feed belt speed: 4-20 m/min Work table motor power: 0.25 kW Pneumatic shoe, lift/lower function: YES

Būklė: naujas, Gamybos metai: 2026, Weima Single-Shaft Shredder Type WL 6 Power output: 18.5 kW Our Machine Concept: WL 6 The Weima high-performance shredders, with their flexible application options, can process all types of wood materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer remnants, etc.) into fuel chips, achieving significant volume reduction of bulky materials. Functionality: The machine is equipped with a large feed hopper and can be loaded via conveyor belt or manually. The hopper can be adapted to individual requirements and guarantees continuous and cost-effective feeding without the need for manual intervention. Hnjdpfoh Hnp Dex Aftsn Technical Specification WL 6 / 18.5 kW Hopper opening: 800 x 1,000 mm Hopper volume: 0.9 m³ Rotor working width: 800 mm Rotor diameter: 252 mm Drive power: 18.5 kW Rotor speed: 80–120 rpm Number of knives: 42 pcs Type and size of knives: concave / 40 x 40 mm, reversible cutting crowns Screen perforation: 10-60 mm possible (standard 15–20 mm) Paint finish: WEIMA standard RAL 2002 / 7016 Connection: 400 V +/-5% / 50 Hz Weight: approx. 1,600 kg Included: - Control cabinet (Rittal) incl. electrical controls (Moeller / Siemens) and star-delta starter - Rubber vibration dampers - V-Rotor (patented) with integrated knife pockets - Gearbox limit switch - Pressure bar - Extremely robust Weima WAP gearbox - Logspacer (self-cleaning hopper) - Second knife row In stock at 54634 Bitburg - Immediately available -

Būklė: naujas, Gamybos metai: 2026, Weima Single-Shaft Shredder Type WL 6 Power: 18.5 kW Our WL 6 Machine Concept The high-performance Weima shredders, with their versatile applications, can process all types of wood materials (hardwood, softwood, chipboard, MDF, plywood, veneer offcuts, etc.) into fuel chips, achieving enormous volume reduction especially with bulky materials. Operating Principle: The machine is equipped with a large feed hopper and can be loaded via conveyor belt or manually. This hopper can be adapted to individual requirements and ensures continuous and cost-effective material feeding, eliminating the need for manual intervention. Hnsdpfx Ascbtpkoften Technical Specifications WL 6 / 18.5 kW - Hopper opening: 800 x 1,000 mm - Hopper volume: 0.9 m³ - Rotor working width: 800 mm - Rotor diameter: 252 mm - Drive power: 18.5 kW - Rotor speed: 80–120 rpm - Number of cutters: 42 pcs - Cutter type and size: concave / 40 x 40 mm, reversible cutting crowns - Screen perforation: 10–60 mm possible (standard 15–20 mm) - Paint finish: WEIMA standard RAL 2002 / 7016 - Connection data: 400 V +/- 5% / 50 Hz - Weight: approx. 1,600 kg Included: - Control cabinet (Rittal) incl. electric controls (Moeller / Siemens) and star-delta starter - Rubber vibration dampers - V-rotor (patented) with profile-milled cutter pockets - Gear limit switch - Pressure bar - Extremely robust Weima WAP gearbox Recommended Accessories - Logspacer (self-cleaning hopper) - 2nd row of cutters From stock 54634 Bitburg - Immediately available -

Būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2025, veikimo valandos: 55 h, Machine with special rotor Available immediately Advantages: + Special rotor with reduced knife projection, suitable for hard and soft materials + 22 kW motor + Effective square knives *For pallets: up to a maximum of 10 pallets per hour *Screen and material dependent. Significantly higher throughput for smaller wood residues. Motor: 22 kW; 400 V - 50 Hz - 3 ph, Screen: 15/20 mm or as agreed (10 to 40 mm possible) Hydraulically operated pusher Current screen perforation (15/20 mm) *can be exchanged Hnedex Af Rdspfx Aften Extraction nozzle Ø 200 mm Feed opening 1000x1000 mm Dimensions: 2000x1800x1645 mm Sample image above: machine color may vary Weight: 1920 kg Standard equipment included: - Control cabinet with PLC control - Automatic star/delta start - Fast hydraulic system - Automatic shut-off when rotor runs idle - Speed 70-90 rpm for high throughput - Cycle control to avoid idle times - Performance-enhancing step control for the hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant The following options are available at extra charge: - Raise shredder by 30 cm (preparation for conveyor belt) + €2,480 net - Angled conveyor belt (discharge height approx. 220 cm) + €12,980 net - Overbelt magnet + €6,980 net - Control for conveyor belt and overbelt magnet + €2,750 net (Start and stop in sync with the shredder) - Enlarged hopper 1500x1500 mm + €3,480 net Requirements for input material: - Moisture content (atro) must be below 25% - Material must be free of metals and mineral contamination. Damage to the tools and/or increased wear may result.

Būklė: naudotas, Gamybos metai: 2026, Special price – Exhibition machine Garbsen Our machine concept WL 6 The Weima high-performance shredder, with its flexible range of applications, can process all types of wood materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer waste, etc.) into fuel chips and achieves, especially with bulky materials, an enormous reduction in volume. Functionality: The machine is equipped with a large feed hopper and can be loaded either via a conveyor belt or by hand. This hopper can be adapted to individual requirements and guarantees continuous and cost-effective material feeding without the need for manual assistance. The hydraulically controlled pusher feeds the wood waste to be shredded into the rotor’s cutting area and is controlled automatically based on load. The internal pusher guides are made of highly wear-resistant plastic (polyamide) and can be adjusted. The hydraulic cylinders are mounted on universal joints to avoid lateral forces on the piston seals. The patented and profiled solid-steel V-rotor has a diameter of 252 mm and operates at a rotor speed of 80-120 rpm. The concave-ground, aggressive, and four-way reversible cutting knives/rotating cutter crowns are fitted in milled knife pockets on special knife carriers. This patented system guarantees, for the first time, a reduction in the cutting gap between counter knife and rotor, high throughput, low energy consumption, and optimal discharge of the shredded material. The screen mounted under the rotor determines the chip size (10—100 mm). On request, a hydraulically opening screen basket is also available. Power transmission from the electric motors is via V-belts to a strongly dimensioned gearbox mounted on the rotor shaft end. Precise cutting with high throughput thanks to profiled V-rotor The V-rotor, specially developed by WEIMA, is universally applicable and made from solid material. Its aggressive material feed, with up to two rows of knives, guarantees high throughput with low power requirement. It can be fitted with hardened cutting knives made of steel in edge lengths of 30 mm and 40 mm. These knives are reversible, which dramatically reduces maintenance costs. Intuitive operation with Siemens PLC control and touch display To ensure that electronics are optimally matched to the machine, we design, build, and wire our own control cabinets. We use only high-quality components – for example, from Siemens or Rittal. Intuitive touch interfaces guarantee rapid adjustments. Functions such as adjusting the pusher cycle or stops ensure high throughput. The built-in overload protection also prevents machine damage. Technical specification WL 6 Feed opening: 800 x 1,250 mm Hopper volume: 0.9 m³ Rotor length: 800 mm Rotor diameter: 256 mm Drive power: 22 kW Rotor speed: 90 rpm Max. number of knives: 42 Type and size of knives: concave / 40 x 40 mm, reversible cutter crowns Screen hole size: 10–60 mm Paintwork: WEIMA standard RAL 2022 / 7016 Power supply: 400 V +/- 5% / 50 Hz Weight: approx. 1,600 kg Included: – Control cabinet* (Rittal), incl. electrical control (Moeller / Siemens) and Hjdpoy D E Tdsfx Aftjnn

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2007, veikimo valandos: 1 100 h, Funkcionalumas: nepatikrintas, bendras svoris: 2 200 kg, peilių skaičius: 42, rotoriaus skersmuo: 260 mm, WEIMA WL 6 – Single-Shaft Shredder for Wood Waste, Year of Manufacture 2007, Only Approx. 1,100 Operating Hours For sale is a used WEIMA WL 6 single-shaft shredder (wood shredder/chipper) from WEIMA Maschinenbau GmbH, Ilsfeld. The machine comes from an ongoing production facility and is in good external condition for its age. Special feature: The hour meter displays only approx. 1,100 hours – with a year of manufacture of 2007, this equates to an average use of only around 60 hours per year. Rotor, bearings, and drive train are therefore showing very minimal wear, as expected. Hnsdpfx Afsy U Nu Tjton The machine is equipped with a conveyor feed unit that automatically supplies material. The upper deck is removable, so manual feeding is also possible. The separate control cabinet is fully included and professionally assembled (Moeller/Eaton contactors, motor protection switches, safety relays, Siemens S7-200 basic PLC). After removal from operation, the machine has not been put back into service. Inspection in Lennestadt (NRW) possible at any time by appointment. Technical data: Manufacturer: WEIMA Maschinenbau GmbH, Ilsfeld Model: WL 6 Year of manufacture: 06/2007 Operating hours: approx. 1,100 h (meter read) Motor power: 18.5 kW Voltage: 400 V / 50 Hz Rotor speed: 90–100 rpm Rotor diameter: 260 mm Rotor length: 800 mm Max. number of knives: 42 pcs. Knife size: 40 mm Screen hole diameter: approx. 14.5 mm (measured) Particle size: adjustable 10–60 mm Feed opening: 800 x 1,250 mm Extraction connection: Ø 200 mm Length: 2,390 mm / Width: 1,390 mm / Height: 1,840 mm Weight: approx. 2,000 kg Feeding: Conveyor belt (removable upper deck) Control: Control cabinet with Siemens S7-200, Moeller/Eaton contactors, safety relays More pictures available on request.

Būklė: naudotas, Gamybos metai: 1997, pjovimo aukštis (maks.): 300 mm, pjovimo plotis (maks.): 450 mm, pjūklo disko skersmuo: 800 mm, darbinis plotis: 450 mm, Siūlome naudotą Hundegger K1-A santvarų apdirbimo įrenginį Hundegger K1, pagamintą 1997 m. Tipas: K1-A Mašinos numeris: 1647 Metai: 1997 Komplektacija: - Skersinis padavimo konvejeris su plokščios grandinės juosta - Po stalu montuojamas šarnyrinis skerspjūvio pjūklas, diskas 800 mm - 4 ašių universalus frezavimas su pirštiniu frezavimo ir kregždutės užlaidos frezavimo galvute Kombinuotas stovas vertikaliai dirbantiems įrankiams: - Gręžimo įrenginys - Vertikali pirštinė freza Kombinuotas stovas horizontaliai dirbantiems įrankiams: Hnjdpfeynwx Esx Aftjn - Gręžimo įrenginys - Gręžimo įrenginys - Pjovimo komplektas angoms - Nugarinis markiruotojas - Automatinis pavertimo įrenginys - Įvairios frezavimo galvutės Apdirbamų detalių matmenys nuo 20x60 mm iki 300x450 mm. Kilus klausimų – rašykite!

Būklė: labai geros būklės (naudotas), KATALOGO NR. 6114 TECHNINIAI DUOMENYS - Pakrovimo piltuvo įvadas 800x1000 mm Hedpfx Ajy Nzxgsftjnn - Rotoriaus darbinis plotis 800 mm - Siurblio variklis 0,75 kW - Pagrindinis variklis 15 kW - Peilių skaičius 21 vnt. - Peilių matmenys 30x30 mm - Sietas 0,8x10 mm - Spaudimo stalčius - Elektrinis automatinis atbulinis - Iškrovimo sraigtai 2×1,1 kW - Matmenys ilg./plot./aukšt. 2460x1800x2250 mm - Svoris 1660 kg – Vokiška gamyba – Autoreverse – Spaudimo stalčius – Nedažytas – Labai gera būklė – Naudotas smulkintuvas Grynasis kaina: 59 900 PLN Grynasis kaina: 14 260 eurų pagal kursą 4,2 euro (Kainos gali skirtis esant didesniems svyravimams)

Būklė: labai geros būklės (naudotas), Gamybos metai: 1997, Weima Einwellenshredder Modell: WL6S Hauptantrieb: 22 kW Hjdpfx Aeivpthsftsnn

Būklė: geras (naudotas), min. szerokość środkowej pryzmy po przecięciu: 55 mm minimalna długość ciętego wałka: 1270 mm maksymalna średnica ciętego wałka: 350 mm średnica wału: 60 mm średnica piły tarczowej: 500 mm płynna regulacja prędkości posuwu przez falownik moc silnika dolnego wrzeciona: 45 kW moc silnika górnego wrzeciona: 37 kW moc silnika posuwu: 1,50 kW Hnodpfxewmg Sas Aftsn

Būklė: labai geros būklės (naudotas), Gamybos metai: 1992, Funkcionalumas: visiškai funkcionalus, Crusher by the German company WEIMA – after technical inspection Hedpouditwjfx Aftjnn – year of manufacture: 1992 – documentation included TECHNICAL PARAMETERS: Feed opening: 800 x 1000 mm Rotor diameter: 315 mm Rotor length: 800 mm Rotor speed: 90 rpm V-rotor Main motor: 22 kW Number of knives: 19 pcs Reversible cutting knives: 30 mm x 30 mm Screen: Ø 20 mm and 15 mm Auto-reverse function Hydraulic pusher drawer Pusher height: 275 mm Discharge flange diameter: Ø 200 mm Machine dimensions (L/W/H): 210 / 160 / 180 cm Weight: 1600 kg

Būklė: labai geros būklės (naudotas), Gamybos metai: 1993, WEIMA WL 6 A Shredder Crusher from the German manufacturer WEIMA – after technical inspection – in very good condition – year of manufacture: 1993 – complete documentation TECHNICAL SPECIFICATIONS: Feed opening dimensions: 800 x 1000 mm Rotor diameter: 175 mm Rotor length: 800 mm Main motor: 18.5 kW Number of knives: 18 pcs Reversible cutting knives: 30 mm x 30 mm HYDRAULIC PUSHER SHREDDER EQUIPPED WITH AUTO-REVERSING FUNCTION V-rotor Hodpsgxuvtefx Aftjnn Screen: 12 mm and 10 mm Rotor speed: 90 rpm Discharge outlet diameter: 200 mm Pusher height: 175 mm Dimensions (L x W x H): 230 x 140 x 160 cm Weight: 1400 kg

Būklė: beveik kaip naujas (naudotas), Окорочный станок с гидравлической подачей Hnsdpfxsrwwxao Aften

Būklė: dilaminuotas dirbtuvėje (naudotas), galia: 30 kW (40,79 AG), bunkerio talpa: 800 l, darbinis plotis: 800 mm, Slow-speed shredder, 800 x 1000 mm feed hopper, Hnedpfxjwzg Taj Aften 30 kW motor, hydraulic pusher, reversible knives