Medienos smulkintuvas

WEIMA WL 4

Sąlyga: naudotas, Gamybos metai: 2025, Speciali kaina – demonstracinis įrenginys Techninė specifikacija WL 4 Piltuvo anga su rąstų atskyrikliu 600 x 1.050 mm Piltuvo talpa 0,6 m³ Rotoriaus darbinis plotis 600 mm Rotoriaus skersmuo 252 mm Pavaros galia 18,5 kW Rotoriaus apsisukimų dažnis 80–120 aps./min Peilių kiekis 28 vnt. Peilių tipas ir dydis konkavi / 40 x 40 mm, apsukamos pjovimo karūnėlės Sietelio skylių dydis 15–20 mm Dažymas WEIMA standartas RAL 2002 / 7016 Prijungimo galia 400 V +/- 5% / 50 Hz Svoris apie 1.300 kg Įskaičiuota: • Valdymo spinta* (Rittal) su elektrine valdymo sistema (Moeller/Siemens) ir žvaigždės-trikampio paleidimu • Guminiai vibraciniai elementai • V-rotorius (patentuotas) su profilyje integruotomis peilių kišenėmis • Pavaros galinis jungiklis • Stūmoklio ciklas • Stūmoklis pusiau atsitrauktas • Rąstų atskyriklis piltuvui • 2-a peilių eilė Sandėliavimo vieta: tiekėjas Kdedpfoyl I Npox Abreh

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2017, Weima medienos smulkintuvas – stūmoklinis padavimas – tylus ir lėtai veikiantis Puiki būklė – tik 150 darbo valandų – Kdedpfexiq Syex Abrsh Tipas: WL 600 Veleno skersmuo (mm): 260 Peilio ilgis (mm): 600 Peilio veleno apsukos (aps/min): 80 - 125 Peilių skaičius (vnt.): 14 Didžiausias granulių dydis (mm): 20/25 Angos dydis (mm): 600 x 800 Ištraukimo jungties skersmuo (mm): 160 Variklio galia (kW): 15 Įtampa (V): 400 Darbinis aukštis (mm): 1645 I x P x A (mm): 1.805 x 1.118 x 1.645 Svoris (kg): 1100 Vieta: sandėlyje, 54634 Bitburg - iš karto prieinama - Tarpinis pardavimas galimas

Sąlyga: naudotas, Gamybos metai: 1993, Galingumas: 18,5 kW Peilių skaičius: 28 Svoris: 1300 kg WEIMA smulkintuvas WL 4 - Pagaminimo metai: 1993 - Serijos numeris: 500/1695 - Puikios būklės, mažai naudotas Techniniai duomenys: Kedpfeyk H Tqsx Abredh - Piltuvo anga su logspacer: 600 x 1000 mm - Piltuvo talpa: 0,6 m³ - Rotoriaus darbinis plotis: 600 mm - Rotoriaus skersmuo: 252 mm - Pavara: 18,5 kW - Rotoriaus apsisukimai: 80–120 aps./min - Peilių skaičius: 28 vnt. - Peilių tipas ir dydis: 40 x 40 mm - Dažymas: WEIMA standartas RAL 2002 / 7016 - Jungimas: 380 V +/- 5% / 50 Hz - Svoris: 1.300 kg

Sąlyga: naudotas, Gamybos metai: 1991, bendras ilgis: 1 660 mm, bendras aukštis: 1 470 mm, bendras plotis: 1 100 mm, Savasis svoris: 1 300 kg - Pagaminimo metai: 1991 - Dokumentacija prieinama: Ne Kdsdpfx Abewu Uy Iersh - CE sertifikatas: Ne - Serijos numeris: 500-1014 - Pagrindinio variklio galia [kW]: 18,5 - Rotoriaus plotis [mm]: 600 - Atidarymo plotis [mm]: 600 - Atidarymo ilgis [mm]: 800 - Sietelio skylučių diametras [mm]: 15 - Rotacinių peilių skaičius [vnt]: 1 - Transportavimo matmenys: 1660 mm x 1100 mm x 1470 mm (ilgis x plotis x aukštis) - Transportavimo svoris [kg]: 1300 kg - Transportavimo vienetų skaičius [vnt]: 1 Finansinė informacija PVM: Nurodyta kaina be PVM PVM/skirtumo apmokestinimas: PVM atskaitomas įmonėms Pristatymas ir įrenginių priėmimas mainais galimi bet kuriuo metu visoje pramonės srityje Yorick Diebels

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, įvesties srovės tipas: trifazis, Untha RS Recycling smulkintuvas Galingumas: 2 x 11 kW Darbo kameros matmenys: apie 500x600 mm Kjdpfxsx S Sato Abrjdh Nauji peiliai Svoris apie 2000 kg Įrenginys idealaus stovio Perforuotas sietas Kaina pagal užklausą Galimybė atlikti bandymus Daugiau nuotraukų ir darbo vaizdo įrašas pagal pageidavimą.

Sąlyga: labai geros būklės (naudotas), nauji peiliai, labai gera būklė Kdjdpfx Absyk Hilerjh

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2026, Low-noise and Slow-speed Shredder WL 4/18.5 kW Technical Data: Hopper opening: 600 x 800 mm Hopper opening with log spacer: 600 x 1050 mm Hopper volume: approx. 0.6 m³ Rotor working width: 600 mm Rotor diameter: 252 mm Number of knives: 28 pcs Knives: 40 x 40 mm concave Screen perforation: 15/20 mm Incl.: Control cabinet Electrical control unit Star-delta starter Ksdpfxjbtnfts Abrodh Rubber vibration dampers Second knife row Log spacer (self-cleaning hopper) Top equipment configuration Location: Ex stock Bitburg – immediately available – at special price

Sąlyga: naudotas, Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, Markė/Modelis: ALTENDORF F 45 Pagaminimo metai: 2006 Būklė: Labai gera Vieta: Vokietija Pristatymas/pakrovimas galimas. Kdsdpsykabzefx Abroh Pagrindinis variklis: 7,5 kW

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2026, Low-noise and slow-speed shredder WL 4/18.5 kW Technical Data: - Hopper opening: 600 x 800 mm - Hopper opening with logspacer: 600 x 1050 mm - Hopper volume: approx. 0.6 m³ - Working width of rotor: 600 mm - Rotor diameter: 252 mm - Number of knives: 28 pcs - Knives: 40 x 40 mm concave - Screen perforation: 15/20 mm Includes: - Control cabinet - Electrical control system - Star-delta starting Kjdpfebunq Hox Abrodh - Rubber vibration elements - Second knife row - Logspacer (free-cutting hopper) Location: 54634 Bitburg Available immediately

Sąlyga: naudotas, bendras svoris: 1 500 kg, rotoriaus skersmuo: 252 mm, bendras ilgis: 1 800 mm, bendras aukštis: 2 000 mm, bendras plotis: 1 200 mm, rotoriaus plotis: 600 mm, galia: 18,5 kW (25,15 AG), sukimosi greitis (maks.): 90 aps./min, pildymo angos plotis: 600 mm, pildymo angos ilgis: 800 mm, No. 3255 Single-Shaft Shredder / Shredder WEIMA WL 4 Used Low-noise and slow-running V-rotor system Main drive motor power: 18.5 kW Rotor diameter: 252 mm Rotor width: approx. 600 mm Rotor speed: approx. 90 rpm Hopper volume: 0.6 m³ Feed opening: 800 x 600 mm (L x W) Reversible knives, concave ground Automatic / manual operation Screen perforation: 15 mm Extraction nozzle: 160 mm Transport dimensions: approx. 1800 x 1200 x 2000 mm (L x W x H) Weight: approx. 1,500 kg Sale on behalf of customer, ex location near 73430 Aalen, without dismantling, transport, or installation Dismantling, loading, and transport by us available as an option Subject to errors in description and price Kdjdpfx Abex Hhk Rjrsh To avoid possible misunderstandings, a viewing on site by appointment is possible and recommended Sale takes place as is Technical specifications, condition description, year of manufacture, and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded. The following applies: “purchased as seen” Images and videos are for illustration purposes only and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment prior to collection or shipment Delivery terms: ex location

Sąlyga: naudotas, Gamybos metai: 2025, Special price – Exhibition machine Garbsen Our machine concept WL 6 The Weima high-performance shredder, with its flexible range of applications, can process all types of wood materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer waste, etc.) into fuel chips and achieves, especially with bulky materials, an enormous reduction in volume. Functionality: The machine is equipped with a large feed hopper and can be loaded either via a conveyor belt or by hand. This hopper can be adapted to individual requirements and guarantees continuous and cost-effective material feeding without the need for manual assistance. The hydraulically controlled pusher feeds the wood waste to be shredded into the rotor’s cutting area and is controlled automatically based on load. The internal pusher guides are made of highly wear-resistant plastic (polyamide) and can be adjusted. The hydraulic cylinders are mounted on universal joints to avoid lateral forces on the piston seals. The patented and profiled solid-steel V-rotor has a diameter of 252 mm and operates at a rotor speed of 80-120 rpm. The concave-ground, aggressive, and four-way reversible cutting knives/rotating cutter crowns are fitted in milled knife pockets on special knife carriers. This patented system guarantees, for the first time, a reduction in the cutting gap between counter knife and rotor, high throughput, low energy consumption, and optimal discharge of the shredded material. The screen mounted under the rotor determines the chip size (10—100 mm). On request, a hydraulically opening screen basket is also available. Power transmission from the electric motors is via V-belts to a strongly dimensioned gearbox mounted on the rotor shaft end. Precise cutting with high throughput thanks to profiled V-rotor The V-rotor, specially developed by WEIMA, is universally applicable and made from solid material. Its aggressive material feed, with up to two rows of knives, guarantees high throughput with low power requirement. It can be fitted with hardened cutting knives made of steel in edge lengths of 30 mm and 40 mm. These knives are reversible, which dramatically reduces maintenance costs. Intuitive operation with Siemens PLC control and touch display To ensure that electronics are optimally matched to the machine, we design, build, and wire our own control cabinets. We use only high-quality components – for example, from Siemens or Rittal. Intuitive touch interfaces guarantee rapid adjustments. Functions such as adjusting the pusher cycle or stops ensure high throughput. The built-in overload protection also prevents machine damage. Technical specification WL 6 Feed opening: 800 x 1,250 mm Hopper volume: 0.9 m³ Rotor length: 800 mm Rotor diameter: 256 mm Drive power: 22 kW Rotor speed: 90 rpm Max. number of knives: 42 Type and size of knives: concave / 40 x 40 mm, reversible cutter crowns Screen hole size: 10–60 mm Paintwork: WEIMA standard RAL 2022 / 7016 Power supply: 400 V +/- 5% / 50 Hz Weight: approx. 1,600 kg Included: – Control cabinet* (Rittal), incl. electrical control (Moeller / Siemens) and Ksdpfsx Twdmsx Abredh

Gamybos metai: 1999, Sąlyga: paruoštas naudoti (naudotas), Šis WEIMA WL 4 pagamintas 1999 m. Jame įrengtas tvirtas 18,5 kW variklis, įrenginys veikia 400 V, 49 A galia, 90 aps./min greičiu. Paduodamoji anga yra 800 x 600 mm dydžio, todėl galima efektyviai smulkinti įvairių matmenų medieną. Apsvarstykite galimybę įsigyti šį WEIMA WL 4 medienos smulkintuvą. Susisiekite su mumis dėl daugiau informacijos. Panaudojimo sritys Kita medienos apdirbimo technika Kdedpfsx D N Rdox Abrsh

Sąlyga: naudotas, Gamybos metai: 2023, Demonstration machine! List price: €33,390. Machine Concept: The Weima high-performance shredder, with its flexible applications, can process all types of wood materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer remnants, etc.) into fuel chips, achieving significant volume reduction especially for bulky materials. Operation: The machine is equipped with a large feed hopper and can be loaded either via conveyor belt or manually. This hopper can be tailored to individual requirements, ensuring continuous and cost-effective material feeding without the need for manual assistance. A hydraulically controlled pusher automatically feeds the wood waste to be shredded to the rotor’s cutting area, adjusting based on load. The internal pusher guides are made from highly wear-resistant plastic (polyamide) and are adjustable. The hydraulic cylinders are mounted with a cardanic suspension to prevent lateral forces on the piston seals. The patented, profiled V-rotor is made from solid steel, has a diameter of 252 mm, and operates at a rotational speed of 80–120 rpm. The concave-ground, aggressive, and four-way reversible knives/cutting crowns are mounted in recessed pockets on special knife holders. This patented system enables for the first time a reduced gap between counter-knife and rotor, ensuring high throughput, low energy consumption, and optimal discharge of the shredded material. Power is transferred from the electric motors via V-belts to a heavy-duty gearbox mounted on one end of the rotor shaft. Standard Equipment: - V-rotor with one knife row 40 x 40 mm - Vibration-damping machine mounts - Hold-down device on the pusher Kjdovfy Rzepfx Abrjdh - Horizontal pusher - Control cabinet with 5 m cable including PLC control and LOGO! text display - Screen basket - WEIMA WAP gearbox - Extraction nozzle Ø 160 mm - Straight feed hopper Additional Equipment: - Additional rotor knife row (28 knives) - Free-cutting hopper (LOGSPACER) - Four-sided segment floor - Fast-reverse hydraulics with shock valve Location in stock:

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, veikimo valandos: 1 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: SH12005, Untha LR 630 Shredder Operating Hours: 1 h Demonstration Machine Ref. No.: SH12005, Year of manufacture: 2024 Item Number: JA_G250303 Description Feed opening: 624 x 792 mm Hopper volume: 0.43 m³ Rotor diameter: 248 mm Speed: 98 rpm Power supply (400V/50 Hz): 18.5 kW Knives: 17 pcs Screen hole: 15-20 mm Extraction port: 160 mm Weight approx.: 1300 kg Kdedpfev Tbqlsx Abrjh Dimensions (LxWxH): 1740 x 1220 x 1670 mm Cable set: 3 m + Connection for screw conveyor discharge Errors and technical changes excepted. Note on new machine: • Prices are ex works pick-up prices (unless otherwise stated!) from our location in Ottendorf-Okrilla, Germany – loaded free on truck! (unless otherwise stated) • Subject to prior sale! • You will receive an invoice with VAT displayed separately. • The buyer is free to inspect the items at our premises. • Our general terms and conditions apply. • Special agreements are only possible in written form. • Any items shown in the background of images are not included in the scope of delivery. • Saw blades are for display purposes only and not included in the delivery. Shipping options: • We are happy to provide you with a transport offer. • Collection from our site in Ottendorf-Okrilla is possible by arrangement, at no extra cost. (Assembly and operational demonstration at our site available by arrangement, optional!) • Our trained service staff can optionally assemble the machine at your location and provide a short briefing. Travel, transport, and service times charged extra.

Sąlyga: labai geros būklės (naudotas), Smulkintuvas Weima WL4, metai: 2022, ideali būklė Kjdpoxyxchefx Abrsdh