BRIKETAVIMO PRESAS

WEIMA TH 1500

Sąlyga: geras (naudotas), Gamybos metai: 1989, Pressing area: 2550 x 1350 mm Number of pressing cylinders: 6 Total pressing force: 140 t Opening width: approx. 400 mm Operating voltage: 3 x 400 V + N, 50 Hz Total connected load: approx. 26 kW Required space (L x W x H) approx.: 3400 x 1600 x 2000 mm Weight: approx. 5500 kg Hydraulic Heated Platen Press Under-piston design Electric heating platens Press pressure infinitely adjustable via pressure switch device Hydraulic pump Central control panel with all controls Digital temperature display for both heating platens Press cycle counter Safety ripcord Bodpfx Aswd N Rmoh Sjwh Rack compensation Main switch Used Machinery Notice: • Technical data may be subject to errors and prior sale. • Prices quoted are ex-works - free loading! • The machine has been cleaned and function-tested. • All machines are purchased as seen, with no warranty claims whatsoever. Buyers have the opportunity to inspect the machines on site. • Special agreements are only valid if made in writing. (We only respond to inquiries including your address and telephone number!)

Sąlyga: naudotas, Gamybos metai: 2025, Special price – Exhibition machine Garbsen Our machine concept WL 6 The Weima high-performance shredder, with its flexible range of applications, can process all types of wood materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer waste, etc.) into fuel chips and achieves, especially with bulky materials, an enormous reduction in volume. Functionality: The machine is equipped with a large feed hopper and can be loaded either via a conveyor belt or by hand. This hopper can be adapted to individual requirements and guarantees continuous and cost-effective material feeding without the need for manual assistance. The hydraulically controlled pusher feeds the wood waste to be shredded into the rotor’s cutting area and is controlled automatically based on load. The internal pusher guides are made of highly wear-resistant plastic (polyamide) and can be adjusted. The hydraulic cylinders are mounted on universal joints to avoid lateral forces on the piston seals. The patented and profiled solid-steel V-rotor has a diameter of 252 mm and operates at a rotor speed of 80-120 rpm. The concave-ground, aggressive, and four-way reversible cutting knives/rotating cutter crowns are fitted in milled knife pockets on special knife carriers. This patented system guarantees, for the first time, a reduction in the cutting gap between counter knife and rotor, high throughput, low energy consumption, and optimal discharge of the shredded material. The screen mounted under the rotor determines the chip size (10—100 mm). On request, a hydraulically opening screen basket is also available. Power transmission from the electric motors is via V-belts to a strongly dimensioned gearbox mounted on the rotor shaft end. Precise cutting with high throughput thanks to profiled V-rotor The V-rotor, specially developed by WEIMA, is universally applicable and made from solid material. Its aggressive material feed, with up to two rows of knives, guarantees high throughput with low power requirement. It can be fitted with hardened cutting knives made of steel in edge lengths of 30 mm and 40 mm. These knives are reversible, which dramatically reduces maintenance costs. Intuitive operation with Siemens PLC control and touch display To ensure that electronics are optimally matched to the machine, we design, build, and wire our own control cabinets. We use only high-quality components – for example, from Siemens or Rittal. Intuitive touch interfaces guarantee rapid adjustments. Functions such as adjusting the pusher cycle or stops ensure high throughput. The built-in overload protection also prevents machine damage. Technical specification WL 6 Feed opening: 800 x 1,250 mm Hopper volume: 0.9 m³ Rotor length: 800 mm Rotor diameter: 256 mm Drive power: 22 kW Rotor speed: 90 rpm Max. number of knives: 42 Type and size of knives: concave / 40 x 40 mm, reversible cutter crowns Screen hole size: 10–60 mm Paintwork: WEIMA standard RAL 2022 / 7016 Power supply: 400 V +/- 5% / 50 Hz Weight: approx. 1,600 kg Included: – Control cabinet* (Rittal), incl. electrical control (Moeller / Siemens) and Bwedpfx Ahjx Twdmo Sjh

Sąlyga: naudotas, Gamybos metai: 1984, Special press dimension, large pressing depth: 1,600 mm Pressing length: 2,750 mm Platen size: 2,750 mm x 1,600 mm - 2.75 x 1.60 m - with 3 heating plates 2 levels/decks including control system – newly retrofitted retrofitted used, in good condition Manufacturer: Ott Model: 300 K 135 Bwodpfxsv Hhude Ah Seh Year of manufacture: 1984 Machine no.: 13741 Number of decks: 2 Cover sheets hard-anodized Platen size approx. 2,750 mm x 1,600 mm Opening width approx. 185 mm Push-button control Safety cord at bottom Lateral guidance Electric heating Specific pressing pressure max. 5.5 bar Piston diameter: 90 mm Bottom pistons: 6 pcs Original price approx. €40,000.00 Required floor space approx. 3,600 mm x 1,600 mm x 2,000 mm Total connected load: 49 kW Stock location: 97447 Gerolzhofen, loaded free on truck, unpacked Delivery as is, as inspected, without warranty or guarantee

Sąlyga: paruoštas naudoti (naudotas), shelf length 3500 mm shelf width 1300 mm water heating Bedpow Aff Dofx Ah Sowh 8 hydraulic cylinders piston diameter 85 mm clearance between shelves 640 mm automatically opening shelf year of manufacture 1992