LATHE

Weiler Condor VS-2/Praktikant W

Būklė: naudotas, Gamybos metai: 2006, Full drilling diameter / mm Drilling depth / mm Number of spindles / 2-machine package: Froriep deep hole drilling machine & Irle finishing machine Perfectly matched duo for deep hole drilling and precise finishing of large workpieces For sale is a specialized machine package – two perfectly coordinated systems for complete machining of long, heavy workpieces with the highest requirements for precision and efficiency. Hfodpfx Asuddimjb Sed MACHINE 1 Froriep CNC Deep Hole Drilling Machine – The Pre-machining Specialist Year of manufacture: 2006 Control: Siemens Sinumerik 840D Max. drilling depth: 8,850 mm Workpiece diameter: 150 – 900 mm Speed range: 1 – 300 rpm Feed rate: 0.5 – 4,500 mm/min Drive power: 129 kW Swing diameter over bed: 1,000 mm Chuck diameter: 900 mm Weight: approx. 47,000 kg Ideal for precision pre-drilling of deep holes – including faceplate, steady rest MACHINE 2 Irle Machine – High-Precision Finishing Power: 129 kW Control: Siemens NC control Speed range: 2 – 300 rpm (stepless) Feed rate: 3 – 4,500 mm/min (stepped) Center distance: 11,000 mm Swing diameter over bed: 1,250 mm Steady rest clamping range: 150 – 1,100 mm Workpiece length: up to 11,000 mm Workpiece weight: up to 10 tons Max. external diameter: 850 mm Perfect for fine boring, honing, and demanding finishing processes with up to 50,000 Nm torque. Your advantages at a glance - Complete solution from a single source – from pre-drilling to final machining - Large workpieces up to 11 meters and 10 tons - High process reliability due to perfect machine synchronization - Ready for immediate use, well-maintained, and from ongoing operation - Ideal for mechanical engineering, energy, oil & gas, hydraulics, and large part manufacturing

Būklė: naudotas, Gamybos metai: 2001, Pressure 0.2–40 t Max. workpiece diameter: 70 mm Thread length: 120 mm Control system Hfedpst Hw N Tsfx Ab Ssd Total power requirement: 29 kW Machine weight approx. 9.5 t Required floor space approx. ... m Quotation We are pleased to offer you—subject to prior sale and errors in technical data—from our stock: PROFIROLL - BAD DÜBEN (Germany) CNC Thread, Gear and Profile Rolling Machine Model ROLLEX, Year 2001 Steplessly adjustable rolling force from 0.2 to 40 tons Rolling spindle diameter: 120 mm Max. workpiece diameter (approx.): 70 mm Spindle drive: approx. 8.5 kW each Total connected load: approx. 29 kW – 400 V – 50 Hz Weight: approx. 9,500 kg Accessories / Special Features - The machine is equipped with a modern CNC control system developed by the manufacturer. Allows input of all relevant process and workpiece data, enabling fast and straightforward set-up for different workpiece sizes (changeover time). All process parameters are graphically displayed on the monitor, providing the user with an optimized process cycle. - Built-in (workpiece) center rolling device for shaft-shaped workpieces (such as gear shafts) with center holes, including a clamping device, prismatic pre-holders for positioning the workpiece before clamping, and a motorized (driven) tailstock center at the workpiece front. The stroke of the workpiece slide is approx. 500 mm—so the workpiece is clamped and moves hydraulically between the two rolling tools. - Cooling unit for hydraulic oil, separate electrical cabinet, CNC operating panel, etc. - Transparent safety covers in the working area. Central lubrication.

Būklė: naudotas, Gamybos metai: 1974, Wheel diameter - max. 400 mm Wheel width 75 mm Total power requirement 25 kW Machine weight approx. 7 t LORENZ High-Performance Gear Shaping Machine Model LS 400 Year of manufacture 1975 S/N 12592 _____ Max. external gear diameter 400 mm * (possibly larger) Max. internal gear diameter approx. 350 mm Max. gear width 75 mm Module range 0.5 - 6 Stroke length 82 mm Stroke position adjustment 0 - 100 mm Distance from shaping spindle to machine body 205 mm Spindle taper approx. MK 5 Strokes per minute roughing/finishing 118 - 1,000 /min. Table size 400 mm Table bore 125 mm Installation height between table and shaping head min./max. 190/290 mm Fixed distance shaping spindle 250 mm Table axial travel approx. 295 mm Hfjdpst Hww Dsfx Ab Ssd Number of teeth approx. 12 - 150 Feed range Tooth depth 0.01 - 0.063 mm /stroke -"- Radial feed at tool-Ø 125 0.125 - 3.150 mm /stroke Spindle / total drive approx. 19 kW / 25 kW - 380 V - 50 Hz Weight 7,000 kg Accessories / Special equipment: • Hydrostatically guided slideway with separate hydraulic unit • Built-in intermediate plate 100 mm to increase shaping head height • Hydraulic workpiece clamping system, brand RINGSPANN, integrated in the table for flat components and internal clamping, various clamping chucks for different workpiece diameters • Infinitely variable stroke speed adjustment for roughing and finishing (SIMOREG DC-Master) • Automatic stroke speed change and automatic feed change for roughing and finishing in up to 3 cuts • Automatic and motor-driven stroke position locking at top dead center after finishing • Separate control cabinet • Integrated coolant system with chip conveyor and magnetic separator • Approx. 20 change gears Condition: Satisfactory to good, shortly demonstration-ready Delivery: Ex stock – as inspected Payment: Net – upon receipt of invoice

Būklė: geras (naudotas), Gamybos metai: 2008, Krumpliaračiai Reishauer RZ303 Hjdpfjxz E S Eox Ab Ssfd

Būklė: paruoštas naudoti (naudotas), Tekinimo ilgis 800 mm Tekinimo skersmuo virš lovos 330 mm Tekinimo skersmuo virš atramos 170 mm Sukimosi greičio diapazonas 24–1900 aps./min. Veleno anga 38,0 mm Centro aukštis 165 mm Bendras galios poreikis 3,5 kW Staklių svoris apie 850 kg Užimama vieta apie 1850 x 800 x 1700 mm Iš profesinės mokyklos – gera būklė (!!) Ypač tinka vidutinio tikslumo tekinimo detalėms Hodpfx Aexmaktjb Sofd - Patikrinta – staklių vaizdo įrašas – ?v=GDoJ0Z7Dckw Įranga: - Tvirta dviem velenais valdoma tekinimo staklė - HEIDENHAIN 3 ašių skaitmeninė indikacija „VRZ 770“ - RÖHM trijų žandikaulių suspaudimo griebtuvas Ø160 mm - Atsilenkiantis apsauginis skydo dangtis - Griebtuvo raktas - TRIPAN įrankių laikiklis su 3 įdėklais - Stumdomas priešcentris - Pasukama staklių lempa - Valdymo pultas priekyje kairėje - Automatiniai išilginio ir skersinio suportų padavimai - Staklių pagrindas su spintelės durelėmis (saugojimo vieta) - Drožlių apsauginė galinė siena - 1 tuščia įrankių spintelė - Avarinio stabdymo mygtukas - Naudojimo instrukcija

Būklė: naudotas, Gamybos metai: 2005, Krumnelinio rato šlifavimo staklės Reishauer RZ150 Hfedpfjxz E Srjx Ab Sed

Būklė: naudotas, Gamybos metai: 1988, Sūkių skersmuo virš staklių lovos 2000 mm Sūkių skersmuo virš atramos / mm Sukimosi ilgis / mm Hodexn Tz Iopfx Ab Ssfd - Tipas 1 K 671 320 F3 - Pagaminimo metai 1988 (pirmasis paleidimas 1998) - Sukimosi ilgis 10.000 mm - Sūkių skersmuo virš lovos 2.000 mm (modifikuota) - Veido plokštės skersmuo 1.950 mm - Veido plokštės spaudimo diapazonas 400 - 1.350 mm - Sukimosi greičiai 1,00 - 140 aps./min. - Sukimo momentas 125.000 Nm - Didžiausia pagrindinė pjovimo jėga 130 kN - Automatinis gręžtuvo įjungimas - Didžiausias ruošinio svoris 70 t - Didžiausias ruošinio svoris su suportu 100 t - Pagrindinio variklio galia 100 kW - Lovoje bėgių skaičius 4 - Matmenys 22.000 x 6.200 x 2.900 mm - CNC valdymas SIEMENS 840D (2010 už 220.000,00 €) - Atramos pastūma X-Z 0,3 - 4.000 mm/min. - Atramos greita pastūma X-Z 4.000 mm/min. - Vidinės kūgio matmenys 140 x 1:7 - Staklės atitinka CE direktyvas - Įskaitant 2 lunetes, 1 ritininį stovą, 4 žnyples, išteisinimo įrenginį - Būklė: labai gera būklė

Būklė: naudotas, Good day, We are offering used clamping devices from Erowa. These are part of the Erowa UPC system and are suitable for both sinker EDM and milling applications. The following items are available: - ER-048377 UPC alignment pallet - Erowa T-slot pallet 320x320, base body made of aluminium, strips hardened and ground - ER-016917 UPC pallet, aluminium, 320 x 320 x 40, with clamping bar Hfodpfxotk Haks Ab Sod All items have been cleaned and inspected by us. In addition, a functionality test was carried out. The clamping devices show signs of use but are technically in very good condition. Individual items can also be purchased separately. Spare parts are available. Do you have any questions? We are happy to assist you.

Būklė: naudotas, Gamybos metai: 2008, Valdymas Siemens 840D Hodpfxowzypno Ab Sofd

Būklė: naudotas, Gamybos metai: 2008, Techninės detalės: Maksimalus rato skersmuo: 300 mm Ratų plotis: 60 mm Modulis - maks.: 5 Hfodpoxz Akfsfx Ab Sed Mašinos svoris apie: 14 t Stalo apsisukimų diapazonas: 80 - 200 aps./min Kėlimo padėties reguliavimo eiga: 400 mm Kėlimo eiga min./maks.: 0-70 mm Kelimų skaičius: 1500 kel./min