Pavarų šlifavimo staklės

Reishauer RZ150

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2014, veikimo valandos: 5 650 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 243-0011, CNC SWISS-TYPE AUTOMATIC LATHE TORNOS EVODECO 16/10 with LNS Bar Loader Fanuc 31iB – 5,646 operating hours Country of Manufacture: CH Voltage: 400V Dimensions: 2135 x 1250 x 2114 mm Net weight: 2,700 kg TECHNICAL DATA Number of axes: 10 Number of spindles: 2 Main spindle Maximum bar diameter: 16 mm Maximum machining length: 180 mm Spindle speed: 12,000 rpm Spindle power: 15.8 kW C-axis indexing accuracy: 0.001° Sub-spindle Maximum bar diameter: 16 mm Spindle speed: 12,000 rpm Spindle power: 15.8 kW C-axis indexing accuracy: 0.001° Kjdpfx Afokhnqgs Iodg Tool set 1 Number of positions: 5 Number of driven positions: 3 Speed of driven tools: 8,000 rpm Tool set 2 Number of positions: 5 Number of driven positions: 3 Speed of driven tools: 8,000 rpm End unit Number of positions: 4 Number of driven positions: 3 Speed of driven tools: 8,000 rpm Subsequent machining Number of positions: 6 Number of driven positions: 6 Speed of driven tools: 8,000 rpm Electrical supply Mains voltage: 400 V All technical specifications are provided subject to errors and omissions.

Gamybos metai: 1985, Sąlyga: geras (naudotas), mašinos/transporto priemonės numeris: 04.2187, Hydraulic Internal Broaching Machine in technically good condition Manufacturer: Arthur Klink Year of manufacture: 1985, overhauled Weight: 2 t Kdedeixntwopfx Af Isg Model: RIW 10 x 1200 x 400 Machine No.: 04.2187 Pulling force: 10,000 kg at 3 m/min Broaching speeds: hydraulically infinitely variable from 1 m/min to 7 m/min Return stroke speed: hydraulically infinitely variable from 7 m/min to 30 m/min Maximum stroke: 1200 mm Broaching tool clamping: universal pull head for flat shanks up to 26 mm width Maximum workpiece diameter: Ø max. 480 mm (limited by oil and chip tray) Table aperture: Ø 70 mm Power supply: 380 Volt / 50 Hz / 5 kW

Sąlyga: geras (naudotas), Gamybos metai: 2019, Niles N 40 MC - 6000 tekinimo-frezavimo centras, Pagaminimo metai: 2019, Valdymas Siemens SI 840 D SL, X/Z ašys 850/6820 mm, Y ašis -200 / +400 mm, B ašis 0,001°, B ašies pasukimo diapazonas -105° / +95°, Įrankių keitiklis 192 pozicijos, Pagrindinio veleno C ašis 0,001°, Kdodpfx Aew T Ag Esf Iog Veleno greitis iki 1750 aps./min., 2 pavarų pakopos, Didžiausias ruošinio svoris tarp tvirtinimo galvutės ir atraminio taško 6.000 kg, Variklio galia 87 kW, Tvirtinimas HSK 100, Luneta 70 - 425 mm, Atraminis taškas,

Sąlyga: naudotas, TECHNINIAI DUOMENYS - Atstumas tarp centrų: 600 [mm] - Centrinės aukštis: 175 [mm] - Stalo orientacija: 11 [°] UNIVERSALUS ŠLIFAVIMO DISKO LAIKIKLIO VERŽLIARAKTIS - Kairiojo šlifavimo disko matmenys: 400 x 50 x 127 [mm] - Dešiniojo šlifavimo disko matmenys: 225 x 20 x 76,2 [mm] - Variklio galia: 3 [kW] - Veleno greitis: 1500 / 1700 / 2200 - Šlifavimo disko laikiklio veleno orientacija: 270 [°] DETALĖS LAIKIKLIO VERŽLIARAKTIS - Detalės laikiklio veleno orientacija: 360 [°] - Veleno greitis: 20 - 400 [aps./min] - Vidinis kūgis: Morse 5 - Variklio galia: 0,9 [kW] PRIEŠVELENIS - Vidinis kūgis: CM4 - Pinolės eiga: 30 [mm] Kedpfx Ajuhbywjf Isdg MATMENYS - Užimamas plotas: 2580 x 1680 [mm] - Aukštis: 1670 [mm] - Svoris: 2200 [kg] PRIEDAI - FISCHER vidinis gręžimo velenas: 14.000 [aps./min]

Sąlyga: geras (naudotas), Gamybos metai: 1998, Stalviršio skersmuo 1800 mm Sukimosi skersmuo 2060 mm Apskritimo skersmuo 2000 mm Darbo aukštis 1557 mm Pagrindinė variklio galia - frezavimo velenas 30 kW Ruoinio svoris 12 t Stalviršio pavara 100 kW 2 pavarų dėžė Kdsdpsw H Dkmsfx Af Ieg Šlifavimo veleno pavara 30 kW Frezavimo velenas SK50 su šlifavimo velenu

Sąlyga: geras (naudotas), šlifavimo skersmuo: 1 600 mm, šlifavimo ilgis: 6 000 mm, Manufacturer: CINCINNATI Model: 60 x 216 Year of manufacture: 1970 Convex and concave grinding 6 steady rests included 2 hydrostatic steady rests Coolant system with magnetic filter Measuring system with 5-arm caliper: Arm 1: Working range 1300 to 1600 mm Arm 2: Working range 1000 to 1300 mm Arm 3: Working range 700 to 1000 mm Arm 4: Working range 400 to 700 mm Specifications Metric US Standard Centre height: 787 mm Grinding diameter Ø: 1574 mm Grinding length: 5800 mm Grinding wheel size: 914 x 101.6 x 304.50 mm Wheel speed: 1800 rpm Dimensions (approx.): Length: 15,100 mm Width: 5,500 mm Height: 3,550 mm Weight: 120,000 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but its accuracy cannot be guaranteed. Accordingly, no representation or contractual terms are implied. We recommend you verify all key details. Ksdpfxsvvvw Ej Af Ijdg

Sąlyga: naudotas, Technical details: Max. balancing mass: 800 kg Balancing body diameter: 1250 mm Balancing speed: 190 – 3600 rpm Bed length: 2600 mm Voltage: 380 V/Hz Drive power: 7.5 kW Machine weight approx.: 1.5 t Machine dimensions (LxWxH) approx.: 3.5 x 1.7 x 2.0 m Control cabinet dimensions: W: 650 x D: 250 x H: 800 mm Horizontal Balancing Machine The balancing machine is used to measure and balance the static and dynamic unbalance of rotors. Max. balancing mass: 800 kg with equal load distribution, i.e. 400 kg per bearing pedestal Power transmission via cardan shaft Bearing journal Ø min./max.: 16-95 / 95-180 mm Bearing center distance min.: 125 mm; distance from shaft end to bearing center max.: 2070 mm Measuring speeds: Ksdpfx Aou Upp Tsf Iedg 1st gear = 190 – 650 rpm 2nd gear = 400 – 1250 rpm 3rd gear = 700 – 2100 rpm 4th gear = 1200 – 3600 rpm 2 workpiece supports with manual traverse along the entire bed length Schenk measuring device with digital display Plus a range of accessories, e.g. multiple rotor shafts with different diameters and various rotor mounts—please inquire! i.D.

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 1991, Funkcionalumas: visiškai funkcionalus, bendras svoris: 35 000 kg, spaudimo jėga: 250 t, įvesties srovės tipas: trifazis, galia: 30 kW (40,79 AG), perforavimo jėga: 250 t, įėjimo įtampa: 200 V, Įranga: apsaugos šviesos užtvara, AIDA NC2-250(1) 250t Eccentric Press in Excellent Condition /ctA2/ Manufacturer: AIDA Model: NC2-250(1) Press Force: 160 t Kdodpfou Dxb Tjx Af Ijg Year of Manufacture: approx. 1991 Stroke Length: 170 mm Die Height (adjustable): 280–400 mm Table Dimensions: 2700 x 760 mm Ram Dimensions: 2100 x 700 mm Electrical Supply: 3x200V (!!), 30 kW – Japanese standard Net Weight: 35,000 kg Dimensions: 2760 x 2800 x 3980 mm Automatic lubrication system. Automatic cutting oil dosing – RAZIOL EST-02 Optionally available with decoiler and straightening machine.

Gamybos metai: 1969, Sąlyga: paruoštas naudoti (naudotas), Max. grinding depth: 80 mm, spindle-to-table distance: 145 mm, spindle bore: 28 mm, connected load: 7 kW, length: 2100 mm, width: 1400 mm, height: 950 mm, weight: 1.6 t, complete with documentation; on-site inspection is possible. Kedpfsqzkdmsx Af Isdg

Gamybos metai: 1983, Sąlyga: labai geros būklės (naudotas), mašinos/transporto priemonės numeris: 03.2133, Manufacturer: Arthur Klink Model: RISZ 16 x 1250 x 400 Year of manufacture: 1983 Machine No.: 03.2133 Weight: 6,800 kg General / Technical Data: Used vertical hydraulic internal broaching machine with 3 broaching stations, in very good condition Tensile force: 16,000 kg Broaching length: 1250 mm Broaching stations: 3 units Distance between broaching stations: 125 mm Kdjdpfsd Nb A Nex Af Ijg Holder diameter for pull heads: 3 x Ø 80 mm Clear width between cylinders: max. 435 mm Cutting speed: hydraulically adjustable steplessly from 1 m/min up to max. 10 m/min Return speed: hydraulically adjustable steplessly from 5 to max. 25 m/min Machine footprint (W x D x H): approx. 5500 x 2800 x 4900 mm (from pit base) Power supply / Connected load: 380 Volt, 50 Hz / 22 kW Accessories / Special Equipment: The machine is equipped with a workpiece table for 3 broaching stations. The tool clamping system is designed for spring-actuated pull heads DIN 1417/18 to lock the broaching tools in the pull bridge. The needle lifting heads in the tool loader are hydraulically locked. The machine features a coolant system with integrated magnetic band chip conveyor for installation in a pit. Remarks: The machine is in very good condition and still has its original paintwork. It is designed for use in series production; for optimal utilization, a foundation (pit) is ideally required. Pull heads and needle lifters are available on request. The machine can be inspected at our warehouse.