Horizontalios nepertraukiamo gręžimo ir kaiščių įterpimo staklės

WEEKE BST 500

Būklė: naudotas, mašinos/transporto priemonės numeris: 008687, Maksimalus skydo plotis: 1000 mm Maksimalus skydo ilgis: 2500 mm Agregatų skaičius: 8 Padėties reguliavimas naudojant skaitmeninį valdiklį (NC): taip Šoninės horizontalios grupės: taip Todpozmmt Iofx An Hoc

Būklė: labai geros būklės (naudotas), Portal machine Movable panel, movable working head (horizontal workpiece) Numerical control Power Control, WoodWOP software Working head safety cabin. Complete machine safety enclosure Infeed support table (workpiece support). Outfeed table (with conveyor belts) Workpiece feed with no. 3 conveyor belts (feed speed (m/min) max approx. 130) Minimum workpiece dimensions (X-Y-Z) mm 250 x 100 x 15 Maximum workpiece dimensions (X-Y-Z) mm 2500 x 1050 x 60 Motorized conveyor belt for waste disposal Separate electrical and control cabinets. Total installed power (kW) 99 No. 2 WORKING UNITS (TOP): (SERVO-MOTOR X-Y-Z): No. 4 drilling units (4 x 2.3 kW) with 10 vertical spindles each (total vertical spindles 40) Tedpogwbbqefx An Hoc No. 3 WORKING UNITS (BOTTOM): (SERVO-MOTOR X-Y-Z): No. 6 drilling units (6 x 2.3 kW) with 40 vertical spindles each (total vertical spindles 240) No. 2 WORKING UNITS (HORIZONTAL): No. 2 drilling units with horizontal spindles No. 21 horizontal drilling spindles (right side) + no. 21 horizontal drilling spindles (left side) No. 8 injection nozzles for glue application and dowel insertion (right side) No. 8 injection nozzles for glue application and dowel insertion (left side) No. 2 dowel magazines for automatic dowel insertion OPTIONAL: BARCODE (WIRELESS SCANNER)

Būklė: naudotas, mašinos/transporto priemonės numeris: 006157, Max. panel width: 1000 mm Max. panel length: 2500 mm Number of units: 5 Number of units: 1 Tsdpfx Aoy Nkyaon Hsc Positioning via NC control: yes Lateral horizontal units: yes

Būklė: naudotas, mašinos/transporto priemonės numeris: 007202, Max. panel width: 2500 mm Max. panel length: 1000 mm Tsdpju Rv Uksfx An Hjc Number of units: 3

Būklė: dilaminuotas dirbtuvėje (naudotas), DOUBLE-SIDED SQUARING AND EDGE BANDING MACHINE – 1st machine in line Edge thickness in rolls (min/max): 0.3 / 3 mm Panel thickness (min/max): 8 / 45 mm Working width (min/max): 236 / 1300 mm Todpfx Aedh Tfgon Hoc Control/Software: ICOS Open Feed speed (adjustable): 10 / 50 m/min No transmission bar (Master & Slave systems) Safety and noise protection cabin SQUARING SECTION (per side): Spray unit (for liquid release agent) Interchangeable milling unit 08.0555 max. 3° (2 x 1 kW) Free position EDGE BANDING SECTION (per side): Gluing unit (Hot Melt + premelter) 04.1570 Pressure zone for edging Edgeband magazine for rolls (compartment no.): 6 Pre-milling unit 08.0555 (2 x 1 kW) max. 3° Milling unit 08.055 (2 x 0.66 kW) 30° + 30 m/min Flush trimming unit 08.517 Spray unit (for polishing agent) Buffing unit 08.617-2 (2 x 0.18 kW) Free position

Būklė: naudotas, mašinos/transporto priemonės numeris: 008406, Didžiausias plokštės plotis: 1000 mm Didžiausias plokštės ilgis: 2500 mm Injektorių skaičius: 12 Tedpfeyl Ihxsx An Hec

Būklė: geras (naudotas), Gamybos metai: 1998, Funkcionalumas: visiškai funkcionalus, Weeke perėjimo gręžimo staklės BST 500, gręžimo galvos dešinėje ir kairėje, 5 apačioje, viršuje nėra. Sandėlyje 5 gręžimo staklės. Parduodamos po vieną. Todpfx Aezb El Hon Hjc

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2002, For sale: Used Rilesa Unix drilling machine - 4 top drilling units - 4 rear drilling units Todsu Shx Dspfx An Hsc - Right and left operation

Būklė: visiškai atnaujintas (naudotas), PC Control Type Power Control Professional Software: woodWOP / TopDrill BST No. 2 automatic throughfeed conveyor belts (4 x kW?) No. 2 horizontal drilling supports (digital position data display for axes) No. 1 drilling unit for each horizontal drilling support (1 x 1.5 kW) No. 21 spindles for each horizontal drilling unit Max. working width (mm): 2500 Min. working width (mm): 250 Tjdpfx Ajdz Uk Ten Hec No. 4 lower vertical drilling supports (digital position data display for axes) No. 2 drilling units for each lower vertical drilling support (2 x 1.5 kW) Various spindles for each drilling unit of the lower drilling supports No. 2 upper vertical drilling supports (digital position data display for axes) No. 2 drilling units for each upper vertical drilling support (2 x 1.5 kW) Various spindles for each drilling unit of the upper drilling supports No. 4 upper vertical workpiece clamps Chip conveyor belt Total connected load (kW): 36

Būklė: labai geros būklės (naudotas), COMPLETE 4-SIDED EDGE PROCESSING AND EDGEBANDING LINE, max. working width 2500 mm, equipped with automatic feeding and stacking system, comprising the following machines: X04004A) Loading portal (with 2 loading stations) "BARGSTEDT" TBH 500/D/30/14 X04004B) Rotating device (90° LONGITUDINAL-TRANSVERSE) "HOMAG" Model TDR31/25/12 X04004C) Cut-off saw (Splitter) "HOMAG" Model FPR620/04/15/PS/LQ (for finished cut) X04004D) Separation station "BARGSTEDT" X04004E) Double-sided sizing and edgebanding machine "HOMAG" Model KFR 620/19/QA/25 X04004F) 1st drilling machine "WEEKE" Model BST 500 D X04004G) 2nd drilling machine "WEEKE" Model BST 500 D X04004H) Rotating device (90° TRANSVERSE-LONGITUDINAL) "HOMAG" Model TDR 51/25/12 X04004I) Motorized belt transfer "HOMAG" TR 10/70/12 X04004L) Cut-off saw (Splitter) "HOMAG" Model FPR620/04/15/PS/LQ (for finished cut) Tedpfx Aslikvhon Hoc X04004M) Stacking portal (with 2 unloading stations) "BARGSTEDT" Model TSP 420/40/30/12 BA

Būklė: labai geros būklės (naudotas), ONE-SIDED DESTACKING STATION - Upper traverse transversely movable by 180° (horizontal) - Console table with vacuum clamps - Internal lifting platform with motorized sheet metal roller conveyor - Front protective fence, movable Tsdpfx Aned Tyvxo Hjc - Separate control cabinet and operator panel - External roller conveyor for stacking panels from destacking unit - External driven roller conveyor from destacking unit, also with belt for transfer at 90° angle of the panels - Operating capacity (cycles/min): 12-15 - Panel thickness (min/max) mm: 10 - 40 - Min. panel dimensions mm: 250 x 320 - Max. panel dimensions mm: 1200 x 3000 - Total connected load kW: 11

Būklė: visiškai atnaujintas (naudotas), PC control Power Control software No. 2 through-feed motorized conveyors No. 2 horizontal drilling supports (digital display of position data for axes) No. 2 drilling units for each horizontal drilling support (1 x 1.5 kW) No. 11 spindles for each horizontal drilling unit Max. working width (mm): 3000 Min. working width (mm): 250 No. 6 lower vertical drilling supports (digital display of position data for axes) No. 2 drilling units for each lower vertical drilling support (2 x 1.5 kW) No. 11 spindles for each drilling unit of the lower drilling supports No. 2 upper vertical drilling supports (digital display of position data for axes) No. 2 drilling units for each upper vertical drilling support (2 x 1.5 kW) Tjdpfxsvhcbzs An Hsc No. 11 spindles for each drilling unit of the upper drilling supports No. 6 upper vertical workpiece clamps Chip removal conveyor Total connected load (kW): 50 / 60 (approx.)

Būklė: labai geros būklės (naudotas), AUTOMATIC MULTI-BORER "WEEKE" Machine can be integrated in a line alongside other machines. Control system: Power Control Software: WoodWop (TOPDRILL BST 500) Transport belts (qty): 2 (feed speed adjustable) Horizontal drilling supports (qty): 2 Drilling units per horizontal drilling support (qty): 2 Spindles per horizontal drilling unit (qty): 11 Max. working width (mm): 3000 Min. working width (mm): 250 Lower vertical drilling supports (qty): 6 Drilling units per lower vertical drilling support (qty): 2 Spindles per unit of lower vertical drilling supports (qty): various Tedpoh Ryhnefx An Hjc Upper vertical drilling supports (qty): 2 Spindles per unit of upper vertical drilling supports (qty): 2 Spindles per unit of upper vertical drilling supports (qty): Upper vertical workpiece clamps (qty): 6 Chip removal conveyor Digital display of axis position data Total connected load (kW): 26

Būklė: geras (naudotas), Gamybos metai: 1997, Funkcionalumas: visiškai funkcionalus, - PVC Primus, 3 mm PVC kasečių sistema - Klijavimas, kraštų pjovimas, frezavimas lygiai, briaunų frezavimas, radiusinis frezavimas - Skutimo peilis, poliravimo agregatas Išmatavimai: 4700 x 1400 x 1650 mm Svoris: 1300 kg Darbiniai matmenys: Ilgis: 4500 mm Plotis: 1020 mm Aukštis: 1630 mm Prijungimo mova: 140 mm Ø Rušinio plotis: min. 60 mm Padavimo greitis: 11 m/min Slėgis: 6 bar 400 voltų spausto oro Krašto storis: 8 mm su juostelėmis, 2 mm su rulonais BE priešfrezavimo agregato Naujas pneumatinis cilindras Siuntimas galimas už papildomą mokestį! Tedpfxswv Uq Ao An Hec Dėl naudotos įrangos amžiaus parduodant verslo klientams garantija netaikoma.

Būklė: labai geros būklės (naudotas), PC control: Power Control Software: TOPDRILL BST 500 No. 2 motorized through-feed conveyors No. 2 horizontal drilling supports (digital position display for axes) No. 1 drilling unit for each horizontal drilling support (1 x 1.5 kW) No. 21 spindles for each horizontal drilling unit Max. working width (mm): 2500 Min. working width (mm): 250 Todpfjivawpox An Hoc No. 4 lower vertical drilling supports (digital position display for axes) No. 2 drilling units for each lower vertical drilling support (2 x 1.5 kW) No. 11 spindles for each drilling unit of the lower drilling supports No. 4 upper vertical workpiece clamps Chip conveyor belt Total connected load (kW): 20