Daugiaašė gręžimo staklės

WEEKE BST 500 D

Būklė: nepatikrintas (naudotas), Gamybos metai: 2012, Funkcionalumas: nepatikrintas, pjovimo plotis (maks.): 4 500 mm, X ašies padavimo greitis: 140 m/min, dalies ilgis (maks.): 2 200 mm, Įranga: CE žymėjimas, dozatorius, TECHNICAL DETAILS The machine is equipped with two saw carriages. The technical specifications apply to both: Maximum panel width: 4,500 mm Maximum panel length: 2,200 mm Maximum tool diameter (saw unit): 380 mm Maximum tool diameter (scoring unit): 200 mm Saw blade projection: 95 mm Number of rip saw grippers: 5 Number of crosscut saw grippers: 8+4 Duedpfeyxn Adsx Ac Dsr Maximum feed speed: 140 m/min Connected load saw unit 1: 15 kW Connected load saw unit 2: 15 kW Connected load scoring unit 1: 2.2 kW Connected load scoring unit 2: 2.2 kW MACHINE DETAILS Control system: WINDOWS 10 Machine programming software: Biesse-OSI EQUIPMENT - Second flexible pusher system - Quick-change system for saw blades - Label printer for barcode - CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") on the basis of photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing, and use of the machine at the place of destination. External reference: 5711

Būklė: nepatikrintas (naudotas), Gamybos metai: 2014, Funkcionalumas: nepatikrintas, ruošinio aukštis (maks.): 60 mm, briaunos storis (maks.): 20 mm, X ašies padavimo greitis: 30 m/min, valdiklio modelis: ICOS OPEN, The machine has the following configuration: Unit: Pre-milling Unit Manufacturer Model: 08.379 Motor Power: 4 kW Speed: 8,800 rpm Unit: Cross-cutting Unit Manufacturer Model: 08.42 / 30 / B Number of Motors: 2 Motor Power: 0.660 kW Unit: Corner Milling Unit Manufacturer Model: 08.055 Number of Motors: 2 Motor Power: 1.850 kW Speed: 12,000 rpm Unit: Rounding Unit Manufacturer Model: SKF-L Number of Motors: 4 Max. Processing Speed: 20 m/min Motor Power: 0.180 kW Speed: 12,000 rpm Unit: Edge Scraper Manufacturer Model: 08.519 Unit: Glue Scraper Manufacturer Model: 08.521 Unit: Brushes Manufacturer Model: 08.617-2 Number of Motors: 2 Motor Power: 0.180 kW Speed: 1,400 rpm Duedpfx Acjyzy Iwo Der TECHNICAL DETAILS Min. Panel Height: 8 mm Max. Panel Height: 60 mm Min. Panel Length: 150 mm Min. Panel Width: 65 mm Min. Edge Thickness: 0.3 mm Max. Edge Thickness: 20 mm Max. Feed Speed: 30 m/min MACHINE DETAILS Control System: ICOS OPEN EQUIPMENT Magazine for roll material Tank for hot-melt adhesive Pressure roller unit for the edge Pressure applied via rubber-coated belt The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photo documentation and technical/commercial descriptions of an informative nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 6089

Gamybos metai: 2007, būklė: nepatikrintas (naudotas), Funkcionalumas: nepatikrintas, bendras ilgis: 5 700 mm, bendras plotis: 1 000 mm, ruošinio ilgis (maks.): 2 000 mm, ruošinio plotis (maks.): 800 mm, Įranga: CE žymėjimas, TECHNINĖS DETALĖS Maksimali panelio plotis: 800 mm Minimali panelio ilgis: 140 mm Maksimali panelio ilgis: 2 000 mm Konvejerio (kilimo) ilgis: 5 700 mm MAŠINOS DETALĖS Matmenys (Ilgis x Plotis): 5 700 x 1 000 mm Rūšiavimo grąžinimas į briaunų klijavimo mašiną: kairėje pusėje Dujdpfjyzzhxox Ac Dor Panelio išvedimas: per oro pagalvių stalą Panelio transportavimas: motorizuotu konvejeriu (kilimu) ĮRANGA CE saugos standartas Mašina parduodama ir pristatoma faktinėje ir teisinėje būklėje („kaip matoma ir patinka“), remiantis fotodokumentacija ir aprašomojo pobūdžio techniniais/komerciniais dokumentais. Pirkėjas turi teisę apžiūrėti prekę prieš atsiėmimą ir prisiima atsakomybę už mašinos montavimą, tvirtinimą bei naudojimą numatytoje vietoje. Išorinis referencinis numeris: 6200

Būklė: nepatikrintas (naudotas), Gamybos metai: 2016, Funkcionalumas: nepatikrintas, briaunos storis (maks.): 22 mm, sukimosi greitis (maks.): 12 000 aps./min, Įranga: CE žymėjimas, The machine has the following configuration: Pre-milling unit Duedpfx Aoyxndbjc Der automatic, time-controlled intervention and positioning via NC lamps for preheating the panel edge edge strip magazine glue pot for EVA hot-melt adhesive premelter for EVA hot-melt adhesive QM-705 End trimming unit IN-801 Number of motors: 2 Top and bottom flush trimming unit RS-100 Number of motors: 2 Motor power: 2 kW Speed: 12,000 rpm Fine trimming and corner rounding unit RF-100 Number of motors: 2 Motor power: 2 kW Speed: 12,000 rpm Corner rounding unit AR30 Number of motors: 2 Motor power: 0.8 kW Speed: 12,000 rpm automatic, time-controlled intervention Cut-off saw unit RB02 Positioning via NC Glue scraper unit RCC-701 Polishing unit SP-501 Number of motors: 2 Motor power: 0.25 kW Spraying unit LPT-700 TECHNICAL DETAILS Minimum panel height: 10 mm Maximum panel height: 60 mm Minimum edge thickness: 0.4 mm Maximum edge thickness: 22 mm MACHINE DETAILS Total connected load: 22 kW EQUIPMENT Pressure with rubber belt Panel support guides with NC positioning CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photo documentation and technical/commercial documents of descriptive character. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, safeguarding, and use of the machine at the destination. External reference: 7673

Būklė: nepatikrintas (naudotas), Gamybos metai: 2006, Funkcionalumas: nepatikrintas, X ašies eiga: 4 400 mm, Y ašies eiga: 1 300 mm, X ašies padavimo greitis: 40 m/min, Y ašies padavimo greitis: 45 m/min, Įranga: CE žymėjimas, The machine has the following configuration: Drilling groups: Upper group with 30 vertical and 6 horizontal spindles Milling group 1: Upper group, 5 controlled axes, 7.5 kW motor power, liquid cooling system Milling group 2: Upper group, 11 kW motor power, 18,000 rpm, liquid cooling system Tool magazine 1: 24 positions, located at the rear of the machine Tool magazine 2: 6 positions, located on the working head TECHNICAL DETAILS X-axis travel: 4,400 mm Y-axis travel: 1,300 mm Maximum workpiece pass-through height: 400 mm X-axis rapid traverse: 40 m/min Y-axis rapid traverse: 45 m/min Z-axis rapid traverse: 22.5 m/min MACHINE DETAILS Control system: WINDOWS Machine programming software: XILOG Single vacuum pump capacity: 250 m³/h Connected load: 35 kW EQUIPMENT Worktable with suction bars Number of suction bars: 8 Vacuum holding fixture for workpiece CE safety standards Automatic chip extraction The machine is sold and delivered in its actual and legal condition ("as seen and approved") on the basis of photographic documentation and technical/commercial documents of descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and operation of the machine at the place of destination. External reference: 8340 Duedpfjyzy S Nex Ac Djr

Būklė: labai geros būklės (naudotas), AUTOMATIC MULTI-BORER "WEEKE" Machine can be integrated in a line alongside other machines. Control system: Power Control Software: WoodWop (TOPDRILL BST 500) Transport belts (qty): 2 (feed speed adjustable) Horizontal drilling supports (qty): 2 Drilling units per horizontal drilling support (qty): 2 Spindles per horizontal drilling unit (qty): 11 Max. working width (mm): 3000 Min. working width (mm): 250 Lower vertical drilling supports (qty): 6 Drilling units per lower vertical drilling support (qty): 2 Spindles per unit of lower vertical drilling supports (qty): various Upper vertical drilling supports (qty): 2 Spindles per unit of upper vertical drilling supports (qty): 2 Spindles per unit of upper vertical drilling supports (qty): Upper vertical workpiece clamps (qty): 6 Chip removal conveyor Digital display of axis position data Total connected load (kW): 26 Dusdpfxoh Ryhnj Ac Dsr

Būklė: visiškai atnaujintas (naudotas), PC Control Type Power Control Professional Software: woodWOP / TopDrill BST No. 2 automatic throughfeed conveyor belts (4 x kW?) Dujdpfx Aodz Uk Tec Dor No. 2 horizontal drilling supports (digital position data display for axes) No. 1 drilling unit for each horizontal drilling support (1 x 1.5 kW) No. 21 spindles for each horizontal drilling unit Max. working width (mm): 2500 Min. working width (mm): 250 No. 4 lower vertical drilling supports (digital position data display for axes) No. 2 drilling units for each lower vertical drilling support (2 x 1.5 kW) Various spindles for each drilling unit of the lower drilling supports No. 2 upper vertical drilling supports (digital position data display for axes) No. 2 drilling units for each upper vertical drilling support (2 x 1.5 kW) Various spindles for each drilling unit of the upper drilling supports No. 4 upper vertical workpiece clamps Chip conveyor belt Total connected load (kW): 36