WEBER platus diržinis šlifuoklis OFZ-2-13

Weber OFZ-2-1350

Būklė: naudotas, Gamybos metai: 2001, Atmušos pločio: 4000 mm Atmušos aukštis: 1000 mm Išoriniai matmenys: 4600 x 1500 mm 2 x 1,5 kW varikliai Bendra nominali oro srauto apimtis: 7000 m³/h Ištraukimo jungtys dešinėje ir kairėje, 300 mm skersmens Sandėliavimo vieta: Garbsen Gedpovvizkofx Ahljuf

Būklė: labai geros būklės (naudotas), Four-sided planer Weinig - Maximum planing width: 230 mm - Maximum planing height: 120 mm - 5 heads: bottom - 5.5 kW; left and right - 11 kW; top - 11 kW; bottom - 5.5 kW - Feed motor: 4 kW Gsdpfx Ahorigxysljuf - Fully adjustable heads - Electrically adjustable height and planing width - Spindle diameter: 40 mm - Feed via cardan shafts with stepless adjustment - Robust planer by WEINIG - Machine length: 415 cm - Machine inspected and in original condition

Būklė: geras (naudotas), Gamybos metai: 1994, 2-sided planer, top and bottom Constant table height (consistent infeed height) Max. planing width: 600 mm Gjdpfxshuthyo Ahljuf Max. planing height: 280 mm Planer heads with strip knives Immediately ready for operation

Būklė: labai geros būklės (naudotas), DOUBLE-SIDED LOADING STATION Vacuum system (with pump) No. 2 vertical support columns for the upper support beam No. 1 upper horizontal support beam (with sliding carriage) Guodpfx Asfi Tg Hjhlsf No. 1 motorized carriage with horizontal metal arms External roller conveyor (at floor level) for feeding the stack of panels to the loading station External motorized roller conveyor (for receiving panels from the loading station) Separate electrical control panel Perimeter safety fence with safety mats Operating capacity (cycles / min) approx. 16 Panel thickness (min/max) mm 10 / 50 (approx.) Min. panel dimensions mm 250 x 320 (approx.) Max. panel dimensions mm 1300 x 3000 (approx.) Total connected load kW 30

Būklė: dilaminuotas dirbtuvėje (naudotas), Number of spindles: 6 pcs Working width: 230 mm Planing height: 120 mm Planer table length: 2500 mm Feed motor: 3 kW Feed speed: 5-24 m/min Total connected load: 27 kW Dimensions (L/W/H): 3900 x 2200 x 2000 mm Machine weight: approx. 2500 kg Weinig Four-side Planer Profimat 23 Window Version with glazing bead cutting or usable as grooving spindle ATS control and program management ----- Machine factory-refurbished in 2024 by Weinig. Technical Data - Summary (possibly including additional accessories – please inquire) ----- General ----- Gedpexpn T Uofx Ahleuf > Working width: 230 mm > Working height: 120 mm > Number of spindles: 6 pcs. > Planer table length: 2500 mm > Feed motor: 3 kW > Feed speed: 5-24 m/min > Total connected load: 27 kW > Dimensions: 3900 x 2200 x 2000 mm > Machine weight, approx.: 2500 kg Spindle Arrangement ----- > Spindle 1: bottom > Spindle 2: right, pneumatically controlled up/down > Spindle 3: left > Spindle 4: top > Spindle 5: bottom > Spindle 6: glazing bead saw, pneumatically controlled up/down Spindle Specifications ----- > Spindle 1: 4 kW, 6000 rpm, 40 mm diameter > Spindle 2: 7.5 kW, 6000 rpm, 40 mm diameter > Spindle 3: 6000 rpm, 40 mm diameter > Spindle 4: 5.5 kW, 6000 rpm, 40 mm diameter > Spindle 5: 4 kW, 6000 rpm, 40 mm diameter > Spindle 6: glazing bead saw, 2.2 kW, 6000 rpm, 40 mm diameter Further Features ----- > Glazing bead cutting or usable as a grooving unit > ATS control, automatic 2-axis positioning for width and height (left and top spindle) with program memory for 99 programs > Machine operation: window package Combined control of right spindle and glazing bead discharge via manual selector switch at operator panel > Spindles with mechanical digital readout (Technical data according to manufacturer specification – no liability assumed!)

Būklė: naudotas, LOSER MODEL AA220 DOWEL TRIMMER / TENON CUTTER - USED - Capacity: 7500/1500 dowels per hour Godpeqpdkcefx Ahleuf - Dowel diameter capacity: 6-18 mm

Būklė: naujas, Gamybos metai: 2022, Dowel hole boring unit: no Drilling depth: 150 mm Slot length: 180 mm Height adjustment travel: 145 mm Motor power: 1.5 kW Guedpfx Aegq Un Ashlef Speed: 3000 rpm Extraction connection: 100 mm Machine length: 1280 mm Machine width: 960 mm Weight: 240 kg

Būklė: labai geros būklės (naudotas), Gamybos metai: 2008, Working width: 1100 mm Workpiece thickness: 3 – 160 mm Godpfx Asychqzehlsuf Abrasive belt dimensions: 1,120 x 1,900 mm Variable feed speed: 2.6 – 13 m/min Feed motor power: 1.10 kW, 400 V, 50 Hz Extraction port diameter: 2 x 160 mm Compressed air supply: 6 bar Dimensions (L x W x H): 1705 x 1545 x 1905 mm 1st Unit: Steel contact roller, Ø 160 mm Motor power: 15 kW, 400 V, 50 Hz 2nd Unit: Combination unit, rubber-coated contact roller, 65 Shore, rigid sanding platen Motor power: 11 kW, 400 V, 50 Hz Abrasive belt cleaning via compressed air 3rd Unit: Cleaning brush Multifunction display Multifunction lever (conveyor belt, workpiece thickness adjustment) Electronic abrasive belt oscillation Conveyor carpet oscillation, pneumatic Motorized workpiece thickness adjustment with LED display in 0.1 mm increments Units equipped with emergency stop device Emergency stop button at infeed & outfeed Motor protection switch Roller table extension at infeed with 2 loose rollers Automatic star/delta starting Complete documentation Note on used machines: • Subject to errors in technical data and prior sale. • Prices quoted are ex-works, loaded free of charge! • The machines have been cleaned and function-tested. • All machines are sold as seen, with no warranty whatsoever. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in writing. (Inquiries will only be answered with your address and telephone number!)

Būklė: labai geros būklės (naudotas), Hochgeschwindigkeits-Hobelzuführung bestehend aus einem freistehenden Flachmagazin vor einem Hochgeschwindigkeits-Hobel. Das Einlaufmagazin wird von Hydraulikmotoren angetrieben, die von einer 5,5-kW-Hydraulikaggregat gespeist werden (max. 140 m/min). Ein Puffer aus Rohmaterial wird flach nebeneinander auf dem Kettenquerförderer ausgerichtet. Der Kettenförderer transportiert die Teile quer zum Anschlag. Das Teil am Anschlag wird durch eine Lichtschranke detektiert, woraufhin die erste Rolle angehoben wird, um den Eintritt zu ermöglichen. Die Transportrolle schiebt anschließend das Werkstück unter die Einzugswalzen des Vierseiters/Hobels. Die erste Einzugswalze des Hobels muss als Freilaufrolle ausgeführt sein, um den Betrieb der EM814 zu ermöglichen. Gujdpfxowgbxzs Ahlof

Būklė: naudotas, Gamybos metai: 2018, Startech CN MAIN FEATURES FLEXIBLE AND INDIVIDUALLY CONFIGURED PRODUCTION COMBINED WITH SPEED AND PRECISION DRILLING FROM ABOVE WITH REFERENCE TO THE TOP SIDE OF THE PANEL ALLOWS FOR ABSOLUTE PRECISE PROCESSING NUMERICAL CONTROL WITH 7" COLOUR SCREEN: SIMPLE AND INTUITIVE TECHNICAL DATA Startech CN AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Working area drilling/grooving mm 0 x 800 / 0 x 800 Stroke of X-axis mm 750 Max. traversing speed X-Y axes m/min 25 DRILLING UNIT Vertical spindles number 7 (4X-4Y, one shared) Horizontal spindles (along Y-axis) number 2 (1+1) Horizontal spindles (along X-axis) number 1 Fixed groove saw (direction) X Diameter of groove saw mm 100 Max. thickness of groove saw mm 5 Motor power kW (HP) 1.5 (2) Spindle speed rpm 3350 Groove saw speed rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air requirement bar 6 Compressed air consumption Nl/cycle 90 Extraction requirement m³/h 1200 Extraction air speed m/sec 20 Extraction connection diameter mm 120 GENERAL FEATURES Universal CNC drilling machine with a working table with fixed gantry and moving workpiece for performing the following operations: - Vertical drilling on the panel surface - Horizontal drilling on all four workpiece sides - Grooving with an integrated groove saw in the 'X' direction Self-supporting structure Machine base made of steel tubular construction to provide a large base for accommodating the working table. The structure rests on 3 self-levelling feet. The electrical control cabinet is integrated into the machine base. Central Bakelite support table 'Easy Motion': - an MDF sector for through drilling, automatically retractable for horizontal drilling - an infeed roller to facilitate panel loading - a rear roller track to ease panel sliding - left and right stops - a central alignment device with manual adjustment The left and right stops must be used to drill horizontally in the 'X' direction on the two opposite panel sides. Panel positioning along the X-axis is via vacuum suction cups. Aggregates carrier This is a gantry structure made from steel tube. The main working unit is installed on the gantry. F10L drilling unit includes: - 7 independent vertical spindles - drill shank D10 mm - spindle pitch 32 mm - 2 horizontal drilling heads, 1 in X direction with one drill bit, 1 double drilling head in Y direction (1 + 1, drill shank D10 mm) - Speed 3350 rpm - 1 integrated sawing unit in X (max. diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - pneumatic vertical travel per spindle 70 mm - pneumatic horizontal travel of the drilling unit Workpiece positioning and drive of the working unit A CNC-controlled vacuum cup clamps and positions the workpiece sequentially under the working unit during processing. Movement along the X and Y axes is on THK guides with motion transmission via reinforced toothed racks. Z-axis movement is pneumatic on ball-bushing guides with stop position adjustable via the unit's positioning. Working unit positioning uses advanced drive and technology. -CONTROL The control software is specifically designed for use Gjdpevwbp Asfx Ahlsuf