Plačiajuostė šlifavimo staklė Weber LCE-2-1350 (DK)
Weber LCE-2-1350 (DK)

Gamybos metai

2011

Sąlyga

Naudotas

Vieta

Vokietija

Plačiajuostė šlifavimo staklė Weber LCE-2-1350 (DK) Weber LCE-2-1350 (DK)

Rodyti žemėlapį

Duomenys apie mašiną

Įrenginio aprašas:: Plačiajuostė šlifavimo staklė Weber LCE-2-1350 (DK)

Gamintojas:: Weber

Modelis:: LCE-2-1350 (DK)

Gamybos metai:: 2011

Sąlyga:: naudotas

Kaina ir vieta

Vieta:: D - Baden-Württemberg

Skambinti

Pasiūlymo informacija

Sąrašo ID:: A20751672

Nuorodos Nr.:: ISS20251212-5630

Naujinta paskutinį kartą:: Data 2025.12.16

Aprašymas

Used machine

Year of manufacture: 2011

Wide belt sander WEBER LCE-2-1350 (DK) Compact with two sanding belts for calibration, veneer, and intermediate lacquer sanding. Featuring a constant working height and equipped as follows:

Sanding Units
Contact Roller Unit
· Grooved steel contact roller Ø 210 mm for precise calibration
· Mechanical adjustment of the contact roller for grit compensation
· Pneumatic lifting of the contact roller

Combination Unit with
· Grooved rubber contact roller Ø 130 mm, rubber hardness 60 Shore – mechanical adjustment of the contact roller for grit compensation
· Pneumatic lifting of the contact roller
· Electronically controlled sanding pad with ISA System 22/22

ISA (Intelligent Sanding Pressure Adjustment)
· Patented segmented pressure beam system with full tolerance compensation
· Pressure segment width 22 mm (movable in longitudinal and cross directions)
· Universal lamella with point-specific activation for all sanding tasks (no need to change sanding lamella between veneer and solid wood sanding)
· Tolerance compensation +/- 1 mm

ISA-Control
· High-resolution workpiece detection with a switching roller for each pressure segment
· Free loading of complex part shapes – multiple feeding with minimal lateral spacing
· Individual adjustment of sanding intensity at all edges
· Sanding pressure adjustable via pressure regulator
· Feed-controlled engagement and disengagement

Drive
· Sanding belt speed 2-18 m/s for high material removal
· Wear-free DC braking
· Self-tensioning belt drive

Belt Control
· Automatic compensation for unequal sanding belt edge lengths
· Optical, contactless, and self-cleaning belt scanning on belt change side
· Fine adjustment of oscillation on belt change side
· Belt run-off switches left and right

Operating Terminal 'SIEMENS' MP 177 6"
· Graphical user navigation via 6" color display
· Program memory for 18 programs
· Setting of all parameters via program

Thickness Overload
· Safety bar at machine inlet with the following functions:
· Automatic lifting of the contact roller and segmented pressure beam
· Feed shutdown

Psdpex Hll Eefx Af Nogg
Feed
· Rubber-coated and spring-loaded pressure rollers before and after the sanding station
· Secure workpiece transport for multiple feeding through pressure lamella with tolerance compensation
· High-quality transport belt made of natural rubber
· Infinitely variable feed speeds for calibration and fine sanding
· Table extension of 400 mm at infeed and outfeed with rollers

Technical Data
· Working width: 1350 mm
· Sanding unit drive (frequency-controlled): 1 x 15.0 kW

Availability: approx. April 2026
Location: Heidelberg

Skelbimas verčiamas automatiškai, todėl jame gali būtų vertimo klaidų.

Tiekėjas

Registruota nuo: 2008

331 Skelbimai internetu

Skambinti

Pateikti užklausą

Telefonas & Faksas

+49 6146 ... skelbimai

Faksas:

Pridėti prie stebėjimo sąrašo

Dalintis Pranešti apie skelbimą

Šie skelbimai taip pat gali jus sudominti.

Mažas skelbimas

Plonapjūvė juostinė staklė Wintersteiger DSG SONIC

Wysoka

495 km

Plonapjūvė juostinė staklė
WintersteigerDSG SONIC

Skambinti

Gamybos metai: 2009, veikimo valandos: 214 h, Sąlyga: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Thin-cut frame saw DSG Sonic – Wintersteiger AG Model / Type: DSG Sonic Year of manufacture: 2009 Technical condition: EXCELLENT, only 214 operating hours Technical data: DSG Sonic – technical data (Wintersteiger) 🔹 Cutting and block parameters: - Feed speed: approx. 1.7 m/min - Saw frame stroke: 210 mm - Number of frame strokes: approx. 550/min Cutting heights for different saw lengths: Saw length 380 mm → cutting height: 30–88 mm (with Air Jet and magazine), 45–88 mm (with double planer) Saw length 420 mm → cutting height: 30–128 mm, 45–128 mm Saw length 500 mm → cutting height: 80–210 mm, 45–210 mm Saw length 550 mm → cutting height: 80–254 mm, 45–254 mm Block lengths: For standard machine: +185 mm With magazine: 250–1700 mm With double planer: +250 mm Block height difference: ±0.5 mm Cutting width for side fence: 140 mm 🔹 Additional technical data: Cutting width for central fence: 2 × up to 60 mm Optional groove width: 2–4 × 15–60 mm Minimum lamella thickness (depending on wood type and cutting height): >1.5 mm Material loss per cut (kerf thickness): from 0.9 mm Saw blade service life (depending on wood): ~40 hours Machine weight: - Basic: 3000 kg 🔉 Noise levels (hearing protection required): At the machine (1 m): - Idle: 97 dB(A) - Cutting: 99 dB(A) At the operator’s workstation: - Idle: 85 dB(A) - Cutting: 88 dB(A) 🌬️ Extraction and air system: Extraction: - Two connections: Ø 120 mm and Ø 150 mm - Capacity: 3200 m³/h (30 m/s) Working air: Pgedpew Dp Ufefx Af Nog - Min. 6 bar - Consumption: 200 l/min Lubrication: Central, with guide monitoring ⚡ Electrical data: - Power supply: L1, L2, L3 + PE - Supply cable cross-section: up to 16 mm² - Control cable: 2 × 1.5 mm²

Peržiūrėti detales

Mažas skelbimas

Platus juostinis šlifuoklis Unitek Excel LC 1370 2N RKRT

Vokietija

999 km

Platus juostinis šlifuoklis
UnitekExcel LC 1370 2N RKRT

Skambinti

Sąlyga: naudotas, Working width: 1350 mm Number of sanding units: 2 pcs. Max. workpiece thickness: 160 mm Abrasive belt dimensions: 1370 x 2150 mm Feed motor: 0.75 HP Unitek Excel LC 1370 2N RKRT MODEL: Excel 2NRKRT 2-BELT MACHINE 1st BELT: ROLLER 2nd BELT: COMBINATION UNIT ROLLER/PAD FOR SOLID WOOD, VENEER, AND INTERMEDIATE LACQUER SANDING - Usable WORKING WIDTH mm: 1350 - SANDING BELT LENGTH mm: 1370 x 2150 - MAX. WORKPIECE THICKNESS mm: 160 - STEEL CALIBRATION ROLLER mm: 180 - Rubber-coated SANDING ROLLER mm: 180 - SANDING PAD WIDTH mm: 50 - BELT MOTOR POWER kW: 14.7 - BELT SPEED m/s: 18/16 - FEED MOTOR POWER HP: 0.75 - Variable speed drive for feed carpet, continuously adjustable SPEED m/min: 4/20 - HEIGHT ADJUSTMENT MOTOR HP: 0.33 - Mechanical BELT OSCILLATION “ECO GEAR PATENT SYSTEM” - 1 pc. DRUM BRAKE for belt braking - Pivoting ROLLER for belt tensioning - 3 pcs. PRESSURE ROLLERS; rubber-coated - EMERGENCY STOP STRIP at infeed - ELECTRONIC DISPLAY of workpiece thickness - 2 pcs. ROLLER TABLES with 2 rollers each at infeed and outfeed - AUTOMATIC CENTERING OF FEED CARPET - 1 EXTRACTION PORT with 160 mm diameter - AUTOMATIC TABLE POSITIONING PLEASE NOTE: New patented belt oscillation system: 1. Without valves 2. Without photoelectric barrier Pedpfxormucxo Af Nsgg 3. Not sensitive to dust 4. Energy-saving, environmentally friendly system Since 2008, the machine model with this system operates continuously without lateral belt run-off! - Unitek steel calibration roller (same for all models) - Unitek flexible pressure pad before and after the roller (same for all machines with 1 roller) - Unitek grit compensation with mechanical grid-set with 6 positions (per piece – same for all models) - Unitek electronically segmented sanding pad with 24 segments (sanding width 1350) - Unitek belt motor power up to 18.4 kW instead of 14.7 kW (per motor) - Unitek surcharge for 2nd motor 14.7 kW (only for Excel 2-belt) - Unitek automatic table lowering in emergency stop (same for all models) - Unitek surcharge for frequency-controlled feed speed - Unitek surcharge for infeed/outfeed roller table with 4 rollers (same for all models) - Price per roller table - Unitek electronic control of machine functions with 12" touchscreen (same for all models) Automatic workpiece scanning with feed control --- Machine price in above configuration upon request! --- Options at additional cost: Surcharge for 3-belt machine Roller-Roller-Pad (Mod. 049): €8,390.00 Freight costs: €1,300.00 Assembly and instruction: €1,300.00 --- All prices stated are net prices plus statutory VAT (19%) --- (Technical data as per manufacturer – subject to change and errors excluded!)

Peržiūrėti detales

Mažas skelbimas

Pakreipiama veleninė frezavimo staklės Panhans 240A

Juszczyn

670 km

Pakreipiama veleninė frezavimo staklės
Panhans240A

Skambinti

Sąlyga: labai geros būklės (naudotas), Apatinės ašies frezavimo staklės Panhans 240A Pjdpfx Asxg Iz Hjf Negg Veleno skersmuo: 30 mm Veleno ilgis: 130 mm Kintamas veleno greitis: 3000/4500/6000/9000 aps./min Elektroninis veleno aukščio reguliavimas Elektroninis liniuotės reguliavimas Elektroninis kampo reguliavimas SCM keturių volelių padavimo įtaisas

Peržiūrėti detales

Mažas skelbimas

Dvigubo galo profiliavimo įrenginys - SCM CELASCHI (SCM Group) Celaschi P 30

Roreto

1 633 km

Dvigubo galo profiliavimo įrenginys - SCM
CELASCHI (SCM Group)Celaschi P 30

Skambinti

Sąlyga: labai geros būklės (naudotas), Independent machine - Universal machine (First & Second in a machine line) Electronic control – EasyLing programmer Safe and soundproof casing No. 3+3 vertical columns to support the working units Min. useful working width (mm): 240 Max. useful working width (mm): 3,100 Min. useful working thickness (mm): 3 Max. useful working thickness (mm): 150 Retractable positioning cams, spacing (mm): 800 Feed rate (min/max), stepless adjustment (m/min): 4 – 24 Total power Psdpfx Ajwhmdfjf Nogg No. 4 machining groups (for each side of the machine): Scoring unit Automatic scoring unit 1 x 3 kW (6,000 RPM) Planing unit 1 x 6 kW (6,000 RPM) 0–10° Universal milling unit (electropneumatically controlled) 1 x 6 kW (6,000 RPM) 0°–90° Universal milling unit 1 x 6 kW (6,000 RPM) 0°–90°

Peržiūrėti detales

Mažas skelbimas

Kranų stogelis Kranas Vidinis kranas Kranų kilimo ir tūpimo takas Demag Portalkran KBK 250KG KBKI/II KBK1/2 8x4m 250Kg DC Kettenzug

Gondelsheim

1 238 km

Kranų stogelis Kranas Vidinis kranas Kranų kilimo ir tūpimo takas
Demag Portalkran KBK 250KGKBKI/II KBK1/2 8x4m 250Kg DC Kettenzug

2 850 €

Pradinė kaina neįskaitant PVM

Skambinti

Gamybos metai: 2012, Sąlyga: geras (naudotas), mašinos/transporto priemonės numeris: ENOG, DEMAG KBK crane runway (crane track), approx. 8x4m Load capacity: 250 KG (0.25 tons) Technical data: Psdpfx Asmqf Nfof Nsgg - Crane runway made from Demag KBK1 + KBK2 rails The system is delivered complete, including: - KBK rails - Rail connectors - Trolleys - End plates - Cable drag chain - Suspension brackets/hangers etc. Including Demag DC-COM 250 KG electric chain hoist The crane is dismantled and available immediately. Used condition, see pictures. Item location: 75053 Gondelsheim Shipping via freight carrier or pickup by appointment only. Demag KBK1, KBK2, and KBK3 rails are in stock! Other KBK systems also available. Load capacities from 125 KG to 1,600 KG. Please inquire about your desired crane runway with overhang and dimensions.

Peržiūrėti detales

Mažas skelbimas

Pasukamos verpstės frezavimo staklės PANHANS 240

Neckar-Odenwald-Kreis

1 193 km

Pasukamos verpstės frezavimo staklės
PANHANS240

Skambinti

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1988, Funkcionalumas: visiškai funkcionalus, frezos veleno ilgis: 150 mm, galia: 11 kW (14,96 AG), ašies skersmuo: 40 mm, bendras svoris: 1 500 kg, Double-sided swiveling spindle support with two robust segment guides, frame constructed in modern steel design, table made of heavy-duty, high-ribbed cast iron, interchangeable milling spindle, three-phase motor for four speeds, electric height and swivel adjustment with rapid and creep feed as well as electronic digital display, incremental switching for height adjustment, milling fence with fine adjustment, metal fence jaws, and replaceable aluminum anti-splinter inserts, extraction ports at the milling fence and below the table, each 120 mm in diameter, minimum extraction speed at the extraction port: 20 m/s, rotatable table insert, interlocked reversing switch for left and right rotation, lockable main switch, cam switch, automatic motor brake. Pgsdpfx Aewcpqqof Nsg Table size: 1350 x 800 mm Table height: 880 mm Motor power: 11 kW Spindle taper: MK 5 Speeds: 3000/4500/6000/9000 rpm Swivel range of spindle: -5° to +45° Height adjustment: approx. 145 mm Control: CNC Table extension on both sides, total length 2500 mm, incl. extendable frame support Infinitely variable four-roller feed 2-axis control Milling spindle with 40 mm diameter and 150 mm length

Peržiūrėti detales

Mažas skelbimas

Pakreipiama frezavimo staklė Panhans 240 Panhans 240

Vokietija

1 106 km

Pakreipiama frezavimo staklė Panhans 240
Panhans240

Skambinti

Sąlyga: naudotas, Gamybos metai: 1995, Naudota mašina Pagaminimo metai: 1995 Įranga ir techniniai duomenys: - Veleno reguliavimas: -5° iki +45° - Veleno reguliavimas: elektrinis su skaitmeniniu indikatoriumi - Aukščio reguliavimas: elektrinis su skaitmeniniu indikatoriumi - Frezavimo atmušalas: su skaitmeniniu rodymu - Veleno skersmuo: 30 mm (MK-5 tvirtinimas) - Variklio galia: 11 kW - Apsisukimų dažnis: 3.000 / 4.500 / 6.000 / 9.000 aps./min - Stalo dydis: 1.340 × 800 mm - Stalo plokštės prailginimas: iš abiejų pusių, su ištraukiama rėmo atrama - Su 4 volelių padavimo mechanizmu - Su Aigner integraliniu atmušalu Matmenys: 2.540 × 1.350 × 1.850 mm Svoris: apie 1.000 kg Pgjdjxiztzepfx Af Njg Prieinamumas: greitai Vieta: 63934 Röllbach

Peržiūrėti detales

Mažas skelbimas

Bad Oeynhausen

1 044 km

Šlifavimo staklės
HEESEMANNMFA 8

Skambinti

Mažas skelbimas

Juszczyn

670 km

Tirštiklis
SCMS520

Skambinti

Mažas skelbimas

PLOKŠTĖS grąžinimo sistema EDGE BANDER GELDMEIER PRFU 1500 WI

Roreto

1 633 km

PLOKŠTĖS grąžinimo sistema EDGE BANDER
GELDMEIERPRFU 1500 WI

Skambinti

Sąlyga: labai geros būklės (naudotas), TECHNISCHE DATEN NICHT VON DIESER MASCHINE Rücklaufeinrichtung für Kantenanleimmaschine (LINKS) In Kombination mit einer einseitigen Kantenanleimmaschine ermöglicht sie einem einzelnen Bediener die kontinuierliche Beschickung der Maschine. Luftschleierbank, Einlauf und Auslauf (Gesamtabmessungen 3.520 x 2.560 mm) 180°-Transfer (3.120 x 2.140 mm) mit motorisierten Rollenbahnen und motorisierten Bändern Motorisierte Fördermatte (9.080 x 1.560 mm) Werkstückmaße (MIN/MAX): Länge – 240 mm / 2.800 mm Breite – 120 mm / 1.300 mm Pjdpeff R Tqofx Af Negg Dicke – 8 mm / 60 mm, optional bis 100 mm

Peržiūrėti detales

Reklamuokite čia