Juostinis šlifuoklis

WEBER LC 2000 DP 1100

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, darbinis plotis: 600 mm, įėjimo įtampa: 400 V, bendras svoris: 3 560 kg, ruošinio aukštis (maks.): 170 mm, The fast deburring machine for deburring, edge rounding, and finishing steel parts up to 600 mm wide. This deburring and finishing machine from Q-Fin has been specifically developed for applying a large radius of up to 2 mm to steel sheet. With the SER600 Super Edge Rounder from Q-Fin, it is possible to deburr, grind, edge-break, round, descale, remove oxidation layer, or apply a linear finish to sheet metal parts up to 600 mm in width. A combination of these operations is also possible. The throughput rate of the SER600 is 3 to 5 times higher than that of comparable machines. This new 2025 model is equipped with a magnetic support and is therefore suitable for processing steel cut parts and other magnetic materials. The machine features 5 processing stations. Operation is conveniently controlled via an HMI touchscreen on the front of the machine. The first station of the SER600 consists of a grinding unit. The abrasive belt in this station removes burrs and/or discoloration from the product surface. If there are no burrs present, the grinding belt can be omitted or removed. It is also possible to use a finer grinding belt or finish with a Scotch-Brite belt. The second and third stations consist of a disc brush unit with 4 oscillating disc brushes. The fourth and fifth stations are fitted with 2 round brushes rotating in opposite directions. These brushes are used to remove sharp edges from the product by breaking edges or, through the unique combination of two brush systems, by creating a radius of up to R=3 mm. By installing special brushes, the SER600 with magnetic system is also ideally suited for removing the oxide layer from steel products or slag from plasma-cut products. We offer the machine in combination with a WES6000 wet grinding dust extraction system as the 'SER600 Set'. The WES6000 was developed by Q-Fin to safely extract grinding dust without loss of suction. This fully stainless steel extraction system operates wet, extracting grinding dust from stainless steel, steel, and aluminium, thus eliminating fire and explosion hazards. According to Q-Fin, it is the safest, simplest, and most sustainable method of extracting grinding dust. With the WES6000, there is no longer any grinding dust in the air and/or the working environment. We currently have 2 units of the SER600 in stock: - 1x new (Year of manufacture: 2025) - 1x only a few months old, like new (Year of manufacture: 2024) The machines can be inspected by appointment in Bergeijk. Both machines come with a 1-year warranty on the construction and all non-wear parts. We can also offer on-site installation of the SER600 + WES6000, including operator training. - Electrical connection of the SER600: 400 V, 50 Hz, 32 A, 16 kW Njdpfxel Dw D Eo Af Nowb - Dimensions: 3640 x 1585 x 2085 mm (L x W x H) - Weight: 3560 kg

Sąlyga: naujas, DM1100 2C – Edge Rounding Machine for Laser, Flame-Cut, and Punched Parts. NEW DESIGN – CAN BE VIEWED UNDER POWER – IMMEDIATELY AVAILABLE FROM STOCK Nedpfjd Ev Upjx Af Njwb The DM1100 2C rounds the upper and lower edges of metal parts from a minimum size of 150 mm up to a length of 1100 mm in a SINGLE PASS. The first station processes the workpieces from below using two counter-rotating cross belts, while the second station works from above, also with two counter-rotating cross belts. The cross belts allow deburring of both inner and outer edges of the workpieces. Sharp edges produced during laser cutting, punching, or shearing of steel, stainless steel, and aluminum parts are removed. Simultaneous processing of both sides of laser-cut or punched metal parts saves time and reduces production costs. Another advantage of the DM1100 2C is its capability to process small parts from 50 mm. By folding up a table, the rotating direction of the upper conveyor automatically reverses, and the gap of the first processing station is bridged, enabling the workpieces to feed directly into the second processing station. Thus, small products measuring from 50 mm up to 150 mm can be processed on one side only. An additional benefit of this machine is the ability to round parts with protective surface film without damaging the film. Easy and tool-free cross belt change. The program for automatic positioning of the upper and lower belts ensures good accessibility and reduces changeover times. User-friendly operation via integrated touch screen. This machine is also available with a return transport system upon request. Technical data: Working capacity (Ø mm) 1100x50 Number of cross-belt stations 2 Cross-belt speed (m/s) 2–8 Feed speed (m/s) 0.6–3.2 Cross-belt motor (kW) (4x) 3 Feed motor (kW) (3x) 0.18 Total power (kW) 13.1 Power consumption (A) 30 Extraction connection per head (Ø mm) 150 Dimensions (mm) 2560x1980x2150 Weight (kg) 2210

Sąlyga: naujas, Gamybos metai: 2025, -TFON Kantenglätt- und Oberflächenreinigungssystem -Materialkompatibilität: Geeignet für Baustahl, Aluminium und Edelstahl. -Arbeitsdickenbereich: Verarbeitet Materialstärken von 0 bis 120 mm. -Kantenglättung: Erzeugt eine Radius 2-Kantenglättung für glatte, sichere Kanten, die das Erscheinungsbild und die Funktionalität des Werkstücks verbessern. -Präzisionssteuerung: Ausgestattet mit einem Siemens-Automatisierungssystem für präzise und gleichbleibende Steuerung während des gesamten Prozesses. Unabhängige Stationen: Mehrere Bearbeitungsstationen ermöglichen vielseitige Anwendungen, sodass verschiedene Arbeitsschritte gleichzeitig oder nacheinander durchgeführt werden können. Tischoptionen: Arbeitsflächengrößen von 650 mm, 1000 mm oder 1300 mm verfügbar, um spezifischen Produktionsanforderungen gerecht zu werden. Tischtypen: Flexible Ausführungen wie Magnet-, Vakuum- oder Magnet-Vakuumtische sorgen für sicheren Halt unterschiedlicher Materialien und Teilegrößen. Plasma- und Sauerstofftechnologie: Setzt moderne Plasma- und Sauerstofftechnik ein, um starke Grate und Schlacke nach dem Schneiden effektiv zu entfernen und sauberere, glattere Oberflächen zu erzielen. Oberflächenreinigung: Entfernt effizient Verunreinigungen wie Rost, Oxide und Zunder von der Oberfläche und bereitet die Teile für weitere Bearbeitungsschritte vor. Kantenglättung für Beschichtung: Bereitet Teile optimal für Lackierung und Beschichtung vor, indem eine gleichmäßige, fehlerfreie Oberfläche erzielt wird. Einsatzbereiche: Ideal für Stahl-Servicezentren, Energie-, Bergbau-, Bau- und Automobilbranche, bietet maßgeschneiderte Lösungen für Schwerlastanwendungen. Nodpjhq A T Uefx Af Nswb Gleichmäßige Ergebnisse: Sechs Lamellenwalzen sorgen synchronisiert für konsistente, gleichmäßige Kantenradien an jedem Teil. Pneumatisches Oszillationssystem: Verlängert die Lebensdauer der Schmirgelbänder durch geringeren Verschleiß und stellt eine gleichbleibende Leistung über die Zeit sicher.

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1987, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 9673240, šlifavimo plotis: 1 100 mm, galia: 15 kW (20,39 AG), aukščio reguliavimo tipas: elektrinis, šlifavimo juostos ilgis: 1 900 mm, suslėgto oro jungtis: 6 juosta, šlifavimo juostos plotis: 1 120 mm, Combination sanding unit with contact roller and air sanding pad Brush roller Sanding belt tension pneumatic, motorized thickness adjustment Technical specifications: Max. working width: 1100 mm Max. workpiece thickness: 150 mm Min. workpiece thickness: 3 mm Sanding belt size: 1900 x 1120 mm Feed speed: 5/10 m/min Sanding unit motor power: 15 kW Height adjustment motor power: 0.50 kW Feed conveyor motor power: 0.5/1.0 kW Njdpfx Ajtppzvef Njwb Operating pressure: 6 bar Air consumption: approx. 20 l/min Extraction port: 2 x 200 mm Weight: approx. 2100 kg Machine width: approx. 1750 mm Machine depth: approx. 1700 mm Machine height: approx. 1900 mm

Sąlyga: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 1999, bendras svoris: 22 800 kg, spaudimo jėga: 250 t, CNC Press Brake Manufacturer: Weinbrenner Model: GP250 Machine Specifications: - Crowning system - Die shifting - Backgauge type 2 Njdpfx Afsr Sxq Rs Nowb - Front bending aid (disassembled for transport) - DNC 900PS control unit All machine documentation is available.

Sąlyga: labai geros būklės (naudotas), Four-sided planer Weinig - Maximum planing width: 230 mm - Maximum planing height: 120 mm - 5 heads: bottom - 5.5 kW; left and right - 11 kW; top - 11 kW; bottom - 5.5 kW - Feed motor: 4 kW - Fully adjustable heads - Electrically adjustable height and planing width - Spindle diameter: 40 mm - Feed via cardan shafts with stepless adjustment - Robust planer by WEINIG - Machine length: 415 cm Nodjrigxyepfx Af Nswb - Machine inspected and in original condition

Sąlyga: naudotas, Deburring and Fine Grinding Machine for Sheet Metal / Flat Material, new The compact machining center for deburring, slag removal, descaling, oxide layer removal, edge rounding, fine grinding, and polishing of metal surfaces. This machine is suitable for heavy-duty applications. With its fixed working height, the machine can be optimally integrated into a production line and is suitable for processing large parts. Nodpfx Afsnah Tas Njwb Working width: 650 - 1650 mm Maximum part weight: 2000 kg Wide-belt with abrasive belt length: 3250 mm Standard with vacuum holding system, optional with magnetic holding system. By using 3250 mm long abrasive belts, you achieve a uniformly smooth surface and reduce consumable costs due to the belts’ longer service life. Thanks to the modular machine design, it is possible to offer the optimal configuration for the customer’s specific processing requirements. The machine structure can accommodate up to 5 internal processing units and 2 additional external processing units. The high rigidity of the machine structure and feed table, combined with advanced mechanics and electronics, make this series a universal machining center for deburring and surface finishing. Please contact us for more information and images via mail(at) or

Sąlyga: naudotas, Deburring and Fine Grinding Machine for Sheet Metal / Flat Material, new The compact processing center for deburring, slag removal, derusting, oxide layer removal, edge rounding, fine grinding, and polishing of metal surfaces. Thanks to its fixed working height, this machine can be optimally integrated into a production line and is suitable for processing large workpieces. Working width: 1150 - 1350 mm Maximum part weight: 500 kg Wide belt grinder with abrasive belt length: 2620 mm Standard equipped with vacuum holding system, optionally with magnetic holding system The use of 2620 mm long abrasive belts ensures a consistently smooth surface and reduces consumable costs due to the longer belt service life. Due to the modular design of the machine, it is possible to offer the optimal configuration for the customer’s processing requirements. Nodpfsnah Tdsx Af Njwb The machine structure can accommodate up to 5 internal processing units and 2 additional external processing units. The high rigidity of the machine frame and feed table, combined with advanced mechanics and electronics, make this series a universal processing center for deburring and finishing operations. Please contact us for further information and images via email at mail(at) or

Gamybos metai: 2022, veikimo valandos: 125 h, Sąlyga: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, bendras ilgis: 12 900 mm, mašinos/transporto priemonės numeris: 250-113316, Abus crane, 5 tons, span 12.7 m, hook travel 20 m, with crane travel and trolley end switches. Hoist operating hours: 125h. Radio remote control with spare transmitter, etc. System like new with documentation. Njdpfx Aetqzq Aef Nswb

Sąlyga: naudotas, Gamybos metai: 2001, Used machine Nodpfx Aewka Snef Nowb Year of manufacture: 2001 Features and technical data: - Constant working height - Equipped with combination unit featuring a steel contact roller and electronic CPS segmented pressure beam with 25 mm intervals - Working width: 1100 mm - Sanding belt length: 1900 mm - Workpiece thickness min./max.: 3 - 150 mm - Feed speed: stepless, 2.5 - 13 m/min - Sanding unit power: 11 kW Paint package: - Infinitely variable belt drive speed via frequency inverter - Belt blow-off device - Vacuum conveyor belt with blower Control system: - Terminal with 50 program memory slots - User-friendly menu navigation via plain text display - Visual display of active components during operation - Fully automatic PLC-controlled start-up sequence for all drives - Digital work time recording Includes cleaning brush Roller table at infeed Roller table at outfeed Extraction capacity: 1850 m³/h Extraction ports: 1 x 180 mm, 1 x 140 mm, 2 x 100 mm Compressed air connection: 6-8 bar Air consumption: 10 l/min Weight: 2200 kg Availability: by arrangement Location: Röllbach