Ekstruderis

Weber DS120

Gamybos metai: 1985, būklė: geras (naudotas), Offer 22556 Technical Data: - Saw blade diameter: 420 mm - Saw blade bore: 30 mm - Maximum cutting length: 3000 mm Pgjdpfx Aoimdlrsl Ijr - Minimum cutting length at 90° + 45°: 335 mm - Cutting range: see attached diagram - Swivel range inward (manual): 90° to 22.5° - Tilt range inward (manual): 90° to 45° - Saw blade speed: 2,800 rpm - Drive: 380 V / 2 x 4,000 W - Compressed air connection: 7 bar - Air consumption per working cycle: approx. 64 l - Required space: approx. W 4,500 x H 1,950 x D 1,600 mm - Weight: approx. 1,400 kg Includes: - Cutting length adjustment with position controller - Position controller replaced in approx. 2002 by WOLFF - Saw unit can be swiveled and tilted for processing high and wide profiles, as well as compound (bevel) cuts

Gamybos metai: 2004, būklė: dilaminuotas dirbtuvėje (naudotas), No. 2054 Psdoiyya Aspfx Al Iegr 1 used, partially overhauled and function-tested extruder Alphatec Type AE-S 75.28 Screw diameter 75 mm – 28 L/D Drive 75 kW – AC Screw speed adjustable up to 80 rpm 1x degassing zone with vacuum pump Installed heating capacity approx. 30 kW 3x temperature control zones for downstream equipment Control cabinet – NEW control system – type Inspection possible at our facility in Wuppertal. Additional extruders available.

Būklė: naudotas, Gamybos metai: 1951, Technical details: Swing diameter over bed: 400 mm Swing diameter over carriage: 240 mm Turning length: 1100 mm Pgjdpfx Aju Ix Hdol Ier Centre height (measured in bed): 190 mm Spindle bore: 40 mm Speed range: 37.5 - 950 rpm Total power requirement: 3.5 kW Tailstock quill taper: MT 4 Tailstock quill travel: 180 mm Approx. machine weight: 1.6 t Approx. machine dimensions LxWxH: 2.6 x 1.4 x 1.3 m The lathe is equipped with a thread cutting device. It has been newly rewired and fitted with a new control cabinet. Emergency-stop switch and chuck guard installed 3-jaw chuck Ø 250 mm Live centre Four-way tool post Tool slide swivels approx. 30° to the right/left Taper turning attachment (cone 15° right/left) 4 change gears

Būklė: geras (naudotas), Gamybos metai: 2016, Funkcionalumas: visiškai funkcionalus, Pagaminimo metai: 2016 * Veikianti ir techniškai patikrinta * Didžiausias pjovimo ilgis: 4 000 mm * Pjūklo disko skersmuo: 500 mm Pgjdpotqmmdjfx Al Ier * Abiejų pjovimo galvų pneumatinis pasukimas 90°, 45° ir 22,5°, tarpiniai kampai nustatomi rankiniu būdu * Valdymo pultas su Windows valdymu * Aušinimo ir tepimo sistema abiem pjovimo galvoms * Judanti ritinėlių sistema medžiagos padavimui * Pneumatiniai vertikalūs ir horizontalūs spaustuvai * Automatiniai pjūklo disko apsaugos gaubtai * Išleidimo įranga ilgiems ruošiniams * Apsaugos įrenginiai su prieigos durimis

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 1991, Funkcionalumas: visiškai funkcionalus, Pilna PVC profilių ekstruzijos linija, visiškai atnaujinta ir išbandyta EKSTRUDERIS: • IDE 75/25, tipas ME7/3 • Vienasraigtis, PVC profilio geometrija ir apvalkalas geros būklės • Valdymas per ekraną (gamintojo atnaujinta) • Pagaminimo metai: 1993 • Variklis 35 kW, 4–40 aps./min. KOEKSTRUDERIS: • IDE MEB 30/25D • Vienasraigčio skersmuo Ø30 mm 25LD • Sraigtas su PVC profilio geometrija ir cilindras geros būklės • Pagaminimo metai: 1992 • Variklis 3,8 kW, 6–64 aps./min. KALIBRAVIMO STALAS: Pgedpjya Eldjfx Al Ijr • IDE • Ilgis: 2 metrai • 2 vakuuminiai siurbliai, 16 vožtuvų • 14 vandens vožtuvų • Rankinis horizontalus ir išilginis reguliavimas TRAUKIMO ĮRENGINYS: • IDE ME30/5 • Pagaminimo metai: 1993 • Kontaktinis ilgis: 1100 mm • Plotis: 100 mm APVALUS PJŪKLAS: • IDE ME52 • Disko skersmuo: 300 mm • Motorizuotas judėjimas • Pneumatinis vežimo judėjimas 180 mm • Pagaminimo metai: 1991 IŠMETIMO STALAS: • IDE • Ilgis: 4000 mm • Pneumatinis judėjimas Visa įranga yra labai geros bendros būklės, mašinos labai švarios ir paruoštos naudojimui.

Gamybos metai: 1990, būklė: geras (naudotas), This haul-off machine, manufactured by Battenfeld Extrusionstechnik GmbH, is currently located in the machinery storage of Plastima Used Machinery. The device, a Haul-Off R630/6V model, was produced in 1990. Pjdpfx Aorrv Uwsl Iegr Brand: Battenfeld Extrusionstechnik GmbH Model: Haul-Off R630/6V Year of manufacture: 1990 Voltage: 380 V Power: 4.5 kW Maximum pipe diameter: 110 mm to 630 mm

Gamybos metai: 1979, veikimo valandos: 216 h, būklė: dilaminuotas dirbtuvėje (naudotas), Funkcionalumas: visiškai funkcionalus, Twin-Screw Extruder, parallel Manufacturer: Hans Weber Maschinenfabrik GmbH Model: DS 85 Year of manufacture: 1979/2022 Machine No.: 85-399 Screw geometry: for rigid PVC profiles Screw diameter: 2 x 85 mm Screw length: 17 x D Screw speed: max. 30 rpm Screw torque: 10,000 Nm Motor power: 3.3 - 25.0 kW Drive motor: Commutator motor Elektra Faurndau Cylinder heating/cooling zones: 4/2 (air cooling with fan) Tool heating zones: 8 Temperature control: 12 x digital temperature controllers KS 40 (PMA) Accessories: Melt pressure sensor and melt temperature sensor Connected load: approx. 60 kW (without tool) Extrusion height: 1000 or 1100 mm Output capacity: approx. 150 - 180 kg/h for rigid PVC profiles Pjdpfx Aljyhcc As Isgr Accessories: Material hopper and adapter fan Accessories: Vacuum pump (1.1 kW) incl. material separator Dimensions: 4500 x 1200 x 2100 mm (LxWxH), incl. material hopper Weight: approx. 4000 kg Note: The electrical control cabinet was completely renewed about 3 years ago. Since then, the extruder has only run for 216 hours. Condition: The extruder is newly painted (light grey RAL 7035) and has been function-tested.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1995, veikimo valandos: 39 000 h, Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, A used and fully functional profile extrusion line, consisting of: Twin-screw extruder (parallel design) Manufacturer: WEBER Model: DS 7.22 Year of manufacture: 1995 Machine no.: DS70-043 Operating hours: 39,000 h Screw diameter: 70 mm Effective screw length: 22 x D Screw geometry: for rigid PVC profiles Torque: 4,500 Nm per screw Screw speed: max. 40 rpm, infinitely variable Drive motor: DC low-voltage motor, thyristor-controlled Drive power: approx. 25 kW Barrel heating/cooling zones: 5/3 (air cooling with fan) Adapter heating zone: 1 Tool heating zones: 5 Control system: conventional control with digital temperature controllers Degassing: rotary vane vacuum pump Busch (1.5 kW) Max. output rate: 120-150 kg/h (rigid PVC, depending on material) Connected load: approx. 50 kW (excluding tooling) Special accessories: melt temperature sensor and melt pressure sensor Adapter between extruder connection and extrusion die Used tooling set for a window profile (extension), consisting of: - Extrusion die "extension", incl. heating bands - Dry calibration - Vacuum tank approx. 2 m long, with 8 inserts for calibration discs - 16 calibration discs Vacuum calibration unit Manufacturer: Uniplast / Greiner Model: CAL VAK 4P Year of manufacture: 1992 Machine no.: K9209590 Overall length: 6,500 mm Vacuum pumps: 4 x Speck vacuum pumps (4.3 kW each) Water circulation pumps: 2 x Calpeda (1.1 kW each) Caterpillar haul-off unit, incl. integrated saw Manufacturer: Uniplast / Greiner Model: CAT PUL 2D Year of manufacture: 1992 Machine no.: R 9204546 Haul-off: Effective contact length: 2,000 mm Track width: 250 mm Max. haul-off force: approx. 25,000 N Speed range: up to approx. 10 m/min Profile saw: TCT circular saw blade: Ø 450 mm Max. profile cross-section: approx. 300 x 100 mm Tilting table Manufacturer: Ide Model: ME N 52/2 Psdpfx Asyhcabjl Isgr Year of manufacture: 1994 Length: 6,000 mm Support width: 270 mm Remark: The entire line was overhauled in 2020 and has only been in operation for 325 hours since then.

Būklė: geras (naudotas), Gamybos metai: 1989, veikimo valandos: 24 048 h, Marke: Hans Weber Maschinenfabrik GmbH Typ: DS 8.7 Seriennummer: DS 85 777 Psdpfozuk Hbsx Al Ijgr Ausführung: Doppelschnecke (Doppelschneckenextruder) Baujahr: 1989 Betriebsstunden: 24.048 h Schneckendurchmesser: 87 mm Anschlussleistung: 90 kW