Dvigubo stulpo portalo tipo frezavimo staklės

WaldrichSiegen PF-S-75/1B-275/300x1240/22

Būklė: labai geros būklės (naudotas), Grinding length without magnetic chuck: 1500 mm Maximum grinding width: 750 mm Iaedpfjwlh Adjx Abvet Longitudinal travel, X-axis: 1520 mm Cross travel, Y-axis: 650 mm Vertical travel, Z-axis: 690 mm Grinding wheel diameter: 406 x 100 mm Spindle speed: 1400 rpm Weight: 8600 kg Accessories: Braillon magnetic chuck 1000 x 500 mm Electronic control: Elcon 3

Būklė: paruoštas naudoti (naudotas), The machine has been overhauled and is fully operational, complete with documentation. Iajdpfefw Az Uox Abvst

Būklė: naudotas, Wheel diameter – max. 180 mm Wheel width 45 mm Module – max. 4 Iasdpfotycg Sjx Abvjt Module – min. 0.5 Stroke length max. 0 – 52 mm Internal spindle taper MK 4 Table diameter 160 mm Table bore diameter 75 mm Stroke rate 355 – 630 strokes/min Feed range 0.008 – 0.4 mm/stroke Required space approx. 2.30 x 1.50 x 2.36 m Drive power 6 kW Machine weight approx. 2,500 kg With rack cutting attachment Change gear set Year of manufacture: approx. 1981

Būklė: dilaminuotas dirbtuvėje (naudotas), Funkcionalumas: visiškai funkcionalus, sukimosi skersmuo virš skersinio stumduko: 690 mm, veleno skylė: 150 mm, tekėjimo skersmuo: 1 040 mm, tekinimo skersmuo virš viršutinio vežimo: 690 mm, centro aukštis: 500 mm, plotis centre: 2 000 mm, veleno greitis (maks.): 5 000 aps./min, X ašies eiga: 160 mm, Z ašies eigos atstumas: 380 mm, strypo praėjimas: 55 mm, Centre height: 500 mm Distance between centres: 2,000 mm Maximum turning diameter On cross slide: 690 mm Over bed: 1,040 mm In gap: 1,070 mm Bed width (hardened guides): 670 mm Gap length: 480 mm Gap length in front of faceplate: 320 mm CARRIAGE Bed guide length: 1,020 mm Cross slide travel: 640 mm Top slide travel: 360 mm SPINDLE Spindle nose: ASA 15'' Spindle bore diameter: 150 mm Front bearing size NN: 200/310/82 mm Rear bearing diameter NNU: 190/260/69 mm Internal Morse taper in reduction bush: No. 6 Spindle speeds: 24 Speed range: 4–800 rpm THREAD CUTTING Number of thread types: 398 Metric threads: 0.5–224 mm Module threads: mod. 0.25–11 Whitworth threads: tpi 56–1/8 Diametral pitch (DP): 112–1/4 FEEDS Number of feeds: 108 Ijdpfxeyhhuwj Abvoat Longitudinal, cross, and top slide feeds: 0.05–22.4 mm/rev RAPID TRAVERSE Longitudinal, cross, and top slide rapid traverse: 2,500 mm/min Longitudinal return: 5,000 mm/min TAILSTOCK Quill diameter: 130 mm Quill Morse taper: No. 6 Quill travel: 420 mm STEADY RESTS Steady rest passage over bed: 140–500 mm Steady rest passage over carriage: 40–350 mm ADMISSIBLE WEIGHT Overhung: approx. 1,500 kg Between centres without steady rest: approx. 5,000 kg Between centres with steady rest: approx. 6,000 kg Machine weight: approx. 7,800 kg

Būklė: naudotas, Gamybos metai: 1974, Wheel diameter - max. 400 mm Wheel width 75 mm Total power requirement 25 kW Machine weight approx. 7 t LORENZ High-Performance Gear Shaping Machine Model LS 400 Year of manufacture 1975 S/N 12592 _____ Max. external gear diameter 400 mm * (possibly larger) Max. internal gear diameter approx. 350 mm Max. gear width 75 mm Module range 0.5 - 6 Stroke length 82 mm Stroke position adjustment 0 - 100 mm Distance from shaping spindle to machine body 205 mm Spindle taper approx. MK 5 Strokes per minute roughing/finishing 118 - 1,000 /min. Table size 400 mm Table bore 125 mm Installation height between table and shaping head min./max. 190/290 mm Fixed distance shaping spindle 250 mm Table axial travel approx. 295 mm Number of teeth approx. 12 - 150 Feed range Tooth depth 0.01 - 0.063 mm /stroke -"- Radial feed at tool-Ø 125 0.125 - 3.150 mm /stroke Spindle / total drive approx. 19 kW / 25 kW - 380 V - 50 Hz Weight 7,000 kg Accessories / Special equipment: • Hydrostatically guided slideway with separate hydraulic unit • Built-in intermediate plate 100 mm to increase shaping head height • Hydraulic workpiece clamping system, brand RINGSPANN, integrated in the table for flat components and internal clamping, various clamping chucks for different workpiece diameters • Infinitely variable stroke speed adjustment for roughing and finishing (SIMOREG DC-Master) • Automatic stroke speed change and automatic feed change for roughing and finishing in up to 3 cuts • Automatic and motor-driven stroke position locking at top dead center after finishing • Separate control cabinet Ijdst Hww Dopfx Abvjat • Integrated coolant system with chip conveyor and magnetic separator • Approx. 20 change gears Condition: Satisfactory to good, shortly demonstration-ready Delivery: Ex stock – as inspected Payment: Net – upon receipt of invoice

Būklė: naudotas, Eccentric Punching Press HAULICK + ROOS Type RVD 125 Double Column Eccentric Press Machine No. 212560 Year of manufacture: 1981 Pressing force: 125 tons Table size: 880 x 800 mm Table opening: 470 x 140 mm Column gap: 900 mm Side column spacing: 415 mm Iaedpfx Aehlnzksbvjt Ram stroke: 45 mm Ram adjustment: 0-80 mm Shut height as shown: 340 mm Strokes per minute: 50 to 300 spm Main drive motor power: 22 kW Power supply: 380 Volt, 50 Hz - Double connecting rod drive with 4-point eccentric shaft bearing for off-center ram force absorption - Free-standing electrical cabinet - NC roller feeder EBU, width 250 mm, year 2003 - Separate control panel for roller feed unit - Coil direction from left to right Space requirement (press) L x W x H: 3000 x 2000 x 3020 mm Transport height: 2950 mm Weight of press: approx. 11 tons

Būklė: naudotas, Clamping Plate – Table of a Long Planer Machine – Ijdpfx Asbn Amfsbvoat Table Width / Clamping Width: 1,845 mm Table Length / Clamping Length: 5,505 mm 7 longitudinal T-slots for T-slot nuts: M30 T-slot pitch: 263 mm Overall Length: 6,230 mm Total Plate Height: 350 mm Weight: 11 t

Būklė: paruoštas naudoti (naudotas), Broadbent Schwerlast-Drehmaschine 1041 mm x 10.000 mm Baujahr ca. 1973. Planschwenkdurchmesser über Bett: 1041 mm (41”) Planschwenkdurchmesser im Bettspalt: 1575 mm (62”) Spitzenweite: 9300 mm (30’ 6”) Spindelbohrung: 115 mm (4 ½”) Spindeldrehzahlen (18 Stufen): 3,3 – 360 min⁻¹ Iedpfov I T Ewsx Abvjat Spindelmotor: 30 oder 40 PS (wird noch bestätigt) Reitstock: MK 6 Zoll/Metric-Gewindeschneiden mittels Wechselrädern 36” Planscheibe mit 4 einstellbaren Backen, 54” Planscheibe, Kegeldrehvorrichtung, Oberschlitten mit automatischem Vorschub, 2 x 18” 3-Punkt-Lünette, 24”/28” Lünette.

Būklė: naudotas, Gamybos metai: 1982, Spindle diameter: 90 mm X-axis travel: 900 mm Y-axis travel: 900 mm Z-axis travel: 1200 mm W-axis travel: 800 mm Table clamping surface: 900 x 1200 mm Rotational movement: 360 degrees Table load capacity: 6.0 t Spindle speed: 25 – 1400 rpm Spindle taper: ISO 40 Power supply: 380 V / 50 Hz Milling spindle drive: 9.2 kW Total connected load: 35 kVA Machine weight: approx. 10 t Space requirement: approx. 4.5 x 2.8 x 2.5 m The machine was completely overhauled by the manufacturer in 1994, including: - new electrical cabinet - new BOSCH servo drives and Heidenhain TNC 360 control (3D control) - facing slide Ø 600 mm, travel: 150 mm The machine is currently not ready for demonstration due to an electrical fault. Iedpfetv H Ucsx Abveat

Būklė: dilaminuotas dirbtuvėje (naudotas), mašinos/transporto priemonės numeris: 550-235-ELD, GENERAL SPECIFICATIONS Maximum rolling diameter: 41 mm Max./min. module range: 1.5 / 0.39 Maximum rolling width: 92 mm Maximum stroke of tool carriage: 760 mm Maximum rack length: 610 mm Max./min. diametral pitch: 20/40 – 32/64 Serial number: 550-235-ELD ELECTRICAL SPECIFICATIONS Iodpsd Nw Ttsfx Abvjat Main motor power: 15 HP