APSAUGINĖS PLĖVELĖS APLIKATORIUS

VIGANO' FD 1300

Būklė: naujas, Gamybos metai: 2023, Power (kVA): 650 Gjdjwpgh Hspfx Ahlobr

Būklė: naudotas, mašinos/transporto priemonės numeris: 007928, Pozicija 1: Šepetėlinė mašina CEFLA-EASY 2000 + TR2V-FV3 Pozicija 2: Lako dengimo mašina CEFLA-EASY 2000 + TR2V-FV3 Pozicija 3: Lako džiovintuvas CEFLA-EASY 2000 + TR2V-FV3 Gsdpfx Aowu Ackshlsbr

Būklė: naudotas, Gamybos metai: 2016, Panel saw with automatic pre-tensioning and double pusher system for optimized cutting Osi Plus numerical control unit Os Labeling labeling unit with onboard graphic marking, including part drawings Label printing management software Optiplanning cut optimizer Cutting length: 4500 mm Cutting width: 2200 mm Blade projection: 95 mm Motorized rollers for side loading on lift table 4500 x 2200 mm. Translation speed: 10.8 m/min (50 Hz) – 13.1 m/min (60 Hz) Automatic identification of disposable sacrificial panels based on thickness data stored in the machine Low stack stop Automatic side loading. Includes: stop grids, double photocell, control keypad, electrical pre-installation for two motorized infeed roller conveyors, and reinforcement with 4 rollers instead of fork slots in the infeed conveyor Intermediate roller conveyor Side infeed roller conveyor, dimensions 3800 x 2200 mm with motorized rollers (floor height 325 mm) Dead roller conveyor for longitudinal offcuts for corner systems, 4500 mm (total length 7295 mm) 3000 mm extension for dead roller conveyor to also handle cross-cut offcuts Long chute for manual transport of cross-cut pieces to the central dead roller conveyor Gbedpfeuc Idxex Ahler Air flotation unloading table, 2050 x 850 mm, equipped with wheels on the front Air blower unit for up to 6 air flotation layers MULTIPUSHER 2.4 system with automatic lubrication Additional mobile lateral aligner on the crosswise axis; this device enables reduction of the minimum panel length for cross-cutting from 1830 mm to 1220 mm Automatic device for detecting saw shaft deflection on angled cuts (longitudinal and transverse), consisting of a sensor capturing deflection directly at the saw arbor and a device counting blade revolutions directly at the saw chuck Keypad for remote cycle start Automatic panel loading via rear lift table Automatic double aligner with pneumatic cylinders Additional mobile lateral aligner on the crosswise axis Main saw blade, max. diameter (mm), 15 kW Scoring blade, max. diameter (mm), 2.2 kW Saw carriage speed 1–140 m/min with brushless motors Longitudinal pusher carriage speed 90 m/min Transversal pusher carriage speed 135 m/min Double pusher carriage: 6 clamps on the longitudinal slide + 10 clamps on the cross slide (8 fixed + 2 on the cross slide, Multi-Pusher system) Cutting system for thin panels

Būklė: labai geros būklės (naudotas), spaudimo jėga: 150 t, stalo plotis: 3 100 mm, Zum Verkauf steht: 1 gebrauchte, hochwertige und sehr gut erhaltene Bystronic Xpert Abkantpresse 3 Meter x 150 Tonnen CNC mit motorischer Hubhilfe Bystronic Beyeler Xpert 150×3100 Hersteller: Bystronic Modell: Xpert150 Baujahr: 2010 Gbjdpfxottl D No Ahljr Achsen: Insgesamt 9 – 6-Achsen Hinteranschlag (X1, X2, R1, R2, Z1, Z2) sowie motorische Front-Hubhilfe Hydraulische Werkzeugklemmung Freistehend, keine Fundamentgrube erforderlich Kapazität / Arbeitslänge / Presskraft: 3 Meter x 3100 mm x 150 Tonnen Komplett gewartet durch Bystronic UK Allgemeine Informationen: Modell: XPERT150x3100 Baujahr: 2010 Technische Daten: Arbeitslänge: 3.100 mm Presskraft: 1.500 kN Hub: 315 mm Eilgang: 190 mm/s Arbeitsgeschwindigkeit: 10 mm/s Rücklaufgeschwindigkeit: 150 mm/s

Būklė: naudotas, Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 06007153/001, bendras aukštis: 6 050 mm, bendras plotis: 3 380 mm, bendras ilgis: 3 074 mm, keliamoji galia vienai sandėliavimo sekcijai: 210 kg, statybinis aukštis: 6 050 mm, įėjimo įtampa: 400 V, Automated Warehouse Optimization Storage System KARDEX Shuttle XP500 System Type: SHUTTLE-XP-500-3050x864 Control: C2000, with B/W OP2000 display Serial No.: 06007153/001 Year of Construction: 2006 Total Load: 2 x 33,550 kg Load per Tray (Medium): 205 kg (evenly distributed) Tray Dimensions: 3050 x 864 mm Number of Trays: 36 units (more or heavier trays available upon request) Dimensions Shuttle W x D x H: 3380 x 3074 x 6050 mm (height of Kardex adjustable to available height) Power Supply: 3/N/PE400 V, 11 A, 50/60 Hz, 4.9 kVA This offer is valid provided the system has not been sold Technical details per Shuttle: - Maximum total capacity of the KARDEX Shuttle XP: 2 x 33,500 kg - Maximum tray capacity: 36 trays, Medium: 210 kg each, evenly distributed, more or heavier trays available upon request - Tray dimensions: 3050 x 864 mm - Machine dimensions (W x D x H): 3380 x 3074 x 6050 mm - System footprint approx.: 10.39 m² - Capacity with 36 trays: approx. 95 m², each tray is approx. 2.64 m² - Electronic volume measurement system in 25 mm increments (grid) - Access opening with sliding doors for personnel and goods protection - Control C2000, with B/W OP2000 display - LED anti-glare lighting above the access point - Use of toothed-belt drive for minimum noise - Use of toothed-belt for fastest order picking - Shelf distance adjustable in 25 mm increments via support profiles, prerequisites for high-density storage - Integrated weight management controls tray weight - Including light pointer Price: On request, inquiries via email only Price: excl. VAT, including transport and installation Delivery time: from stock Machinehandel De Leeuw BV specializes in pre-owned paternoster systems from, among others, Kardex, Hanel/Haenel, Electrolux, Bertello, Megamat, Lista, Denocard, and automated storage systems such as the Kardex Shuttle XP and XPlus systems. Gbedpfoxq Tbtox Ahler Machinehandel De Leeuw BV Oordeelsestraat 7-B 5111 PA Baarle-Nassau The Netherlands

Būklė: naujas, Papildomas oro kompresorius yra reikalingas, kad azoto generatorius galėtų gaminti azotą. Azoto grynumas: 99.999% Godjxfrv Espfx Ahlebr Įėjimo slėgis: 8 bar Išėjimo slėgis: 7 bar Galia: 75 W (galia nurodo vienos valandos azoto gamybos elektros sąnaudas) 3 viename dizainas: nereikia papildomo oro kompresoriaus, šaldytuvo ar džiovintuvo Švarios dujos Kaina EXW (sandėlys Europoje), įskaitant užkrovimą ant sunkvežimio. Transportas, montavimas, paleidimas, apmokymai ir metinė priežiūra prieinamos pagal užklausą už papildomą mokestį. Montavimą ir apmokymus visuomet atlieka mūsų aukštos kvalifikacijos aptarnavimo komanda trijose Europos vietose: Nyderlandai, Vokietija, Rumunija. Oficialus pardavėjas: CNC Top Ten bv Coevorden, Nyderlandai

Būklė: naujas, Cefla dažymo sistema Gedpfx Ahewhbrwjlobr

Gamybos metai: 2020, būklė: naujas, Ultrasonic cleaning baths for washing, phosphating, chromating, degreasing, and removing paint coatings. Materials ROMER ultrasonic cleaning systems are constructed using stainless steel, providing protection against acids. The tanks feature additional insulation walls to prevent heat loss and ensure faster heating. High-quality materials guarantee a long service life of the vibrating components. Heating System The ROMER bath heaters are made of premium materials and high-temperature resistant ceramic elements. The heating system delivers high thermal efficiency, with hot water automatically mixing with cold water to heat the entire tank evenly. Ultrasonic Transducers The ultrasonic elements used in ROMER cleaning machines are installed in submersible modules, which better reflect the vibrations and are replaceable. The ultrasonic frequency range is 20–40 kHz depending on the component being washed. Lower frequencies are used for large, high-strength parts, while higher frequencies suit jewelry, delicate mechanical systems, and similar applications. All transducers are connected using high-temperature resistant cables. Godpfx Ahjfzk Ewjljbr

Gamybos metai: 2020, būklė: beveik kaip naujas (parodų įrenginys), Hydraulic Press for Die Testing and Adjustments Gjdpfx Ahsk Sgvyjlebr Brand: MHG Model: ER.2S.DM-300/2100 Serial Nº: 927 Year: 2020 Required Power: 40 kW Hydraulic Oil: 1000 L tank + 200 L circuit fill Total Cycles: 403 (AS NEW MACHINE, PRACTICALLY UNUSED) Maximum Force: 300 t Number of Cylinders: 3 Maximum Tooling Dimensions: 1400 x 1400 mm Maximum Tooling Weight: 16,000 kg Max. Opening (fixed and moving table): 1690 mm Min. Opening (fixed and moving table): 960 mm Max. Stroke of Moving Table: 730 mm Approach Speed: 92 mm/s Return Speed: 93 mm/s Stop Time: 0.2 s Safety Distance: 500 mm Weight (empty tank): 35,000 kg

Gamybos metai: 2023, būklė: naujas, Ultraschallschreiniger mit SPS-Steuerung, speziell für medizinische Anwendungen konzipiert. Gbjdpfx Asfg Eqwehler Kapazität: 50 Liter Automatische Befüllung: vorhanden Automatische Dosierung: vorhanden Deckel: pneumatischer Kolben Programmierbar: ja, mit SPS Füllstandskontrolle: vorhanden Ultraschallschreiniger, Ultraschall-Entfettungsanlage, Ultraschallwaschanlage, kompakte Ultraschallreinigungsmaschine, medizinischer Ultraschallschreiniger, Automobilbereich