Birių produktų tiektuvas

Vecoplan FS 400 4-FACH

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2001, veikimo valandos: 9 413 h, mašinos/transporto priemonės numeris: 101T2551-1, - Engine power: 179 kW at 2200 rpm - Engine type: Caterpillar 3126 DITA - 6 cylinders Isdpev Nhyfefx Abkoik - Machine weight: 17.5 t - Width: 2.50 m - Height: 3.10 m - Length: 9.70 m

Gamybos metai: 2022, Sąlyga: beveik kaip naujas (parodų įrenginys), Aluminum angled conveyor belt with substructure Horizontal section: 3,000 mm Inclined section: 5,000 mm Incline angle at the bend (optional): 35°, 40°, or 45° Total conveyor belt length: - Discharge height: - Height of horizontal section: - Conveyor belt width: 600 mm (extendable) Drive drum + return drum Ø150 x 620 mm, S235 steel, welded and machined Steel return drum at bend, mounted and crown-turned Reinforced aluminum profile construction 135 x 45 mm PU conveyor belt DM 10/2 0+005 PU incl. wave edge, petrol matte Drive: Motor 1.1 kW, speed 0.3 m/sec Connection: 230/400V, 50Hz, Protection class IP54 Drive etc. ready for connection, motor included Iisdpfx Aoi Igzfobkok 2 pcs wave edges 80 x 45 mm 39 pcs T60 cleats, spacing 401 mm 2-ply, especially laterally stable Usable width: 470 mm, calculated as follows: Transverse arrangement -70+45-50+470+50+45-70 mm

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2022, veikimo valandos: 2 500 h, Funkcionalumas: visiškai funkcionalus, Used pellet production plant, capacity 2.5 tons per hour, complete with belt dryer. Iodpfx Abswk Htxokjik

Sąlyga: naudotas, Plant: Inclined Clarifier, Lamella Clarifier, Lamella Separator Condition: Used, up to 120 m³/h depending on the medium Iiedpoppyhtjfx Abkok Design: Robust, high-performance construction Material: Stainless steel (VA) on container frame, 30' container, scraper plates: made of PP Dimensions (LxWxH): 7580 x 2435 x 3000 mm Weight: approx. 8,000 kg Operating Principle: The wastewater is fed to the inlet of the inclined clarifier and flows downward. Due to the arrangement of the lamella plates inside the clarifier, the water is redirected below the lamellas and then flows upwards through the plates. As a result, solids settle onto the lamellas and the clarified water is directed to the outlet. The solids gradually slide down along the lamella plates, where the sludge funnel is located. Rake Mechanism: Optionally, we offer the inclined clarifier equipped with a rake mechanism, which keeps the sludge in a flowable condition. Application: Separation of solids and liquids by sedimentation. Inclined clarifiers are often used as a pre-stage before filter presses or decanters for thickening. By pre-thickening thin sludge, the filter press can be designed with a smaller filter area. The plant is in good condition and is available for rental or purchase. An inspection at our facility can be arranged by appointment. We also offer new inclined clarifiers with a lead time of approx. 8 to 10 weeks!

Gamybos metai: 2005, Sąlyga: paruoštas naudoti (naudotas), Wielopła Brodpol WP-165 2W - Machine in stock - Manufactured in Poland - Year of manufacture: 2005 TECHNICAL SPECIFICATIONS: - Cutting width: 380 mm - Cutting height: 165 mm Ijdpfxjfum U Es Abksik - Diameter: 300 mm - Four top feed rollers - Pneumatic roller pressure - Four bottom feed rollers - Two rows of ratchets - Spindle diameter: 70 mm - Spindle speed: 3,640 rpm - Main motor: 2 x 55 kW - Total power: 114 kW - Horizontal clearance: 500 mm Machine dimensions: - Length: 220 cm - Width: 180 cm - Height: 220 cm - Weight: 2,940 kg

Sąlyga: beveik kaip naujas (naudotas), Set, packed in wooden crate, screw and cylinder barrel for 150 mm extruder nitrided feed section, screw with shearing and mixing section Iiededm Aghopfx Abksk

Gamybos metai: 2018, Sąlyga: naudotas, Fully operational Spanish (RECALOR) sawdust dryer. Chip output at dryer outlet: approx. 12,000 kg/h (10% moisture content, wet basis). Ijdpsv Rfuvsfx Abkjik For sale due to replacement with a more efficient system.

Sąlyga: naujas, Gamybos metai: 2024, New machine Year of manufacture: 2024 Features and technical data: Right-hand configuration Technical data: Overall dimensions: 1,900 x 1,410 mm Hopper opening: 1,044 x 1,044 mm Hopper height: 1,010 mm Hopper capacity: 1.1 m³ Drive power: 5.5 kW Briquette diameter: 50 mm Hydraulic oil: 160 l Throughput capacity: up to 50 kg/h (depending on material) Paint finish: Weima Standard Connected load: 400 V +/- 5% / 50 Hz including: Press mechanism with feed cylinder, main cylinder, clamp cylinder Connection fitting for transport piping Chromed clamp Hydraulic tank 160 l with pump motor + valve control Oil temperature safety switch Base plate 1,040 x 1,040 mm with agitator + motor and Screw conveyor discharge screw + motor Side panels standard height 1,010 mm Base frame with rubber feet Control cabinet on hopper and electrical control system Briquette length monitoring Automatic end position for all cylinders Manual control Automatic "On/Off" with fill level limit switch Material: Planer shavings, sawdust from solid wood, loose, clean and free of contaminants* Max. dimensions: 12 mm Throughput capacity: approx. 50 m³/year/ *Contaminant specification: Anything other than wood, wood pieces larger than 12 mm. Throughput capacity is highly dependent on the material. Average values are indicated. Iiodpfst Hagnjx Abkjk Depending on mix, moisture, and material characteristics! Application not or not fully known/specified. Machine is sold appropriately and according to requirements by a specialist dealer. In the event of heat build-up, the run time may be drastically shortened due to increased temperature. Availability: short notice Storage location: Solingen

Gamybos metai: 2023, Sąlyga: naujas, This true powerhouse can strip cables with diameters of up to an incredible 120 mm! Equipped with 380 volts and a 3 kW motor, this machine is genuinely built for industrial applications. The substantial net weight of 210 kg is essential and, of course, ensures it stands on its own feet. Key feature: Extremely versatile—handles cable diameters from 2 mm up to 120 mm with ease. Ijdpfxsi A Ixfo Abkeik Technical Specifications: Cutting speed: — Processing capacity: Ø 2 mm — Ø 120 mm Motor power: 3000 watts Voltage: 380 volts Weight: approx. 210 kg Dimensions (cm): 89 W × 58 D × 136 H

Sąlyga: naujas, Bunker belt system suitable for feeding presses, shredders, etc. Delivery possible throughout Europe. Technical specifications: Item 1: Feed hopper Item 2: Infeed conveyor 1.5 kW, conveyor width: 1100 mm, axle distance: 3500 mm Item 3: Inclined conveyor 1.1 kW, conveyor width: 1100 mm, axle distance: 4700 mm Standard discharge height: 2800 mm (can be increased with spacer feet as shown in the illustration) Isdpedxwlqefx Abkjik Made to order Further information and data available on request.