Baldų durų rėmo presas (specialus dydis)

V. Grum-Schwensen MTP

Būklė: naudotas, Gamybos metai: 2000, For fully automatic assembly of frame components. Frame external dimensions: min. 120 x 120 mm, max. 1050 x 2,500 mm Codpfxod H Irfo Ab Tjgu 2 heating rails

Būklė: naujas, Gamybos metai: 2023, Sheet width: 1540 mm Sheet thickness: 4 mm Top roll diameter: 110 mm Lower roll diameter: 110 mm Bending roll diameter: 110 mm Csdpfxsvx Uvxs Ab Tsgu Total power requirement: 1.1 kW Machine weight: approx. 0.9 t Space required: approx. 2.5 x 0.6 x 1.1 m New machine Cone bending device, hardened and ground rolls, motorised bending roll stationary control panel, digital display for the right and left bending roll, digital display for the lower roll

Būklė: naujas, Gamybos metai: 2024, mašinos/transporto priemonės numeris: 302340, Ring bending machine Manufacturer: KB Turkey Model: MB 30 Lower shaft: 30 mm Upper shaft: 30 mm 2 driven rollers With base frame for horizontal and vertical operation Bending capacity: Round tube up to 48 x 3.0 mm Cedpfod S Uf Sox Ab Tegu Flat bar (upright) 50 x 10 mm Square tube 40 x 40 x 3 mm Weight: 170 kg Motor: 0.75 kW, 400 Volt, 50 Hz, 3 phase.

Būklė: naujas, Saw blade diameter: 350 mm Cutting capacity at 90 degrees (round): 115 mm Cutting capacity at 90 degrees (square): 95 mm Cutting capacity at 90 degrees (rectangular): 180 x 95 mm Cgsdpfefg Rlcsx Ab Tju Working height: 925 mm Saw blade speeds: 15 - 90 rpm Total power requirement: 3.0 kW Machine weight approx.: 0.68 t Space requirements approx.: 0.8 x 1.0 x 1.85 m Electropneumatic, vertical, linear-guided automatic saw for use with HSS saw blades, suitable for serial cuts from 60° left to 45° right on steel. The machine can also operate in semi-automatic cycle mode. CNC automatic machine with multiprocessor and two axes controlled by MEP control system of the latest generation, allowing the programming of up to 1000 different cutting programs on the same material thickness, each with different cutting lengths and quantities.

Būklė: naudotas, rida: 835 837 km, galia: 309 kW (420,12 AG), pirmoji registracija: 11/2010, kuro tipas: dyzelinas, tuščias svoris: 9 580 kg, didžiausias leistinas svoris: 16 420 kg, bendras svoris: 26 000 kg, padangos dydis: 315/80R22.5, ašių konfigūracija: 6x2, ratų bazė: 4 800 mm, kuras: dyzelinas, stabdžiai: intarder, spalva: geltonas, vairuotojo kabina: miegamoji kabina, pavaros tipas: automatinis, emisijos klasė: Euro 5, pakaba: kitas, sėdimų vietų skaičius: 2, bendras ilgis: 9 480 mm, Gamybos metai: 2010, statybinis aukštis: 3 850 mm, lovų skaičius: 1, Įranga: ABS, borto kompiuteris, kruizo kontrolė, oro kondicionavimas, priekabos jungtis, trauki kontrolė,

Būklė: geras (naudotas), Gamybos metai: 2012, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 3 000 mm, Y ašies eiga: 2 000 mm, galia: 13 kW (17,68 AG), It is a LEVIBRETON ONE surface grinding machine. The machine features a oscillating head as well as a 750 mm diameter grinding plate. With this machine, the surfaces of hard stones and soft stones (such as marble) can be polished, satin-finished, or bush-hammered using the appropriate tooling. Cgsdpfsrpi E Ajx Ab Tsu

Būklė: naudotas, Number of sanding units: 4 pcs. Sanding width: 190 mm Max. sanding height: 180 mm Control: yes Weight: 3,300 kg Dimensions (L/W/H): 2,600 x 920 x 1,890 mm Extraction port diameter: 2x180, 2x120 mm Double-sided sanding machine Löwer DSM 2004 ----- 4-belt sanding machine + disc unit from top/bottom Manufacturer's description: ----- Double-sided four-belt single-piece wood sanding machine for sanding solid wood, such as window profiles, etc. High-stability premium version with innovative features. Designed for high continuous load even with greater material removal. - Sequentially arranged sanding units for pre-sanding, fine sanding, and finishing, each from top and bottom 1st sanding unit: heavy steel roller 2nd sanding unit: rubber-coated roller and shoe 3rd finishing unit: fiber brush (see optional equipment below) - Directly driven sanding rollers for slip-free power transmission - Maintenance-free and wear-free CERMET-coated sanding shoes with excellent thermal conductivity and absolute dimensional stability - External cooling of sanding zones for cooler sanding and longer belt life - Forced pneumatic belt oscillation - Effective dust extraction directly at the sanding rollers - Airborne dust extraction at tension rollers - Integrated brushing and finishing unit with large dust extraction - Motorized sanding thickness adjustment via precision lead screws and large linear ball bearing sets on hardened and ground precision shafts with dust and dirt protection - Removal adjustment below via precision lead screw with scale ring (resolution 0.1mm) - Pneumatic belt tensioning with constant tension pressure - Quick belt change with pneumatic belt release in seconds - Adjustable sanding belt tracking during belt changes - Electropneumatic compressed air monitoring - Infeed protection via contact roller for oversized workpieces - Workpiece transport via calibrated, slip and adhesive-resistant conveyor belts over heavy cast iron tables with finely planed surfaces and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and uniform workpiece transport - Feed gear motor with stepless speed control 4–20 m/min - All motors electrically protected - Ergonomically arranged controls - Digital thickness display (resolution 0.1mm) with modern magnetic tape system Technical Data: - Belt speed: 22 m/s - Belt length: 1,800mm - Belt width: 200mm - Working width: 190mm - Sanding thickness: 2–180mm - Four braking motors for drive: 5.5 kW - Feed motor: 1.5 kW - Feed speed: 4–20 m/min - Automatic height adjustment: 0.37 kW - Two brush units with fiber brushes D 120 x 200mm at 0.37 kW each - Extraction ports: 2 x 180mm, 2 x 120mm - Extraction air speed: 20 m/s - Pneumatic connection: 6 bar Cedovu Hgbepfx Ab Tegu - Working height: 870mm - Length (with Softdisc 2,740mm): 2,600mm - Length with control panel (with Softdisc 3,035mm): 2,985mm - Width: 880mm - Height: 1,910mm - Approx. weight: 3,300 kg - Operating voltage: 400 V, 50 Hz, 3P - CE compliant Equipped with the following options: - Sanding belt air blow-off 4-belt via nozzles directly at the radii ...

Būklė: naudotas, Weinig Profimat 22 with 4 left-hand mobile spindles, equipped with a measuring sensor for automatic adjustment based on the width of the workpieces being processed. Overall dimensions and weight: 330 x 145 x H160 cm. Weight 1400 kg (on pallet). Codpfx Aboryb D So Tegu

Būklė: labai geros būklės (naudotas), Four-sided planer SCM Compact XL - Planing width: 23 cm - Planing height: 13 cm Cgjdpfjlat Hdox Ab Tsu - Electrically adjustable top head and feed rollers - All spindles adjustable vertically and horizontally - Bottom spindle: 4 kW, right and left spindles each driven by a 7.5 kW motor, top spindle: 5.5 kW, universal spindle: 5.5 kW Machine in very good condition

Gamybos metai: 2004, būklė: labai geros būklės (naudotas), Four-side planer - Maximum planing width: 23 cm - Maximum planing height: 16 cm - 2 feed rollers in the table - Chrome-plated table Cedpfx Abohlp D Ns Togu - Infinitely variable feed speed adjustment - 2 overhead transfer rollers in front of the bottom head, plus a roller device for short elements - 4 spindles: bottom 5.5 kW, right 5.5 kW, left 5.5 kW, top 7.5 kW The machine is in very good condition, lightly used, equipped with spiral cutterheads on the bottom, right, and left spindles, and a Tersa knife head on the top spindle.