Suoliukas gręžtuvas

UWM UWM 20

Sąlyga: naudotas, Working width: 1350 mm Number of sanding units: 2 pcs. Max. workpiece thickness: 160 mm Abrasive belt dimensions: 1370 x 2150 mm Feed motor: 0.75 HP Unitek Excel LC 1370 2N RKRT MODEL: Excel 2NRKRT 2-BELT MACHINE 1st BELT: ROLLER Godpfx Abormucxedeil 2nd BELT: COMBINATION UNIT ROLLER/PAD FOR SOLID WOOD, VENEER, AND INTERMEDIATE LACQUER SANDING - Usable WORKING WIDTH mm: 1350 - SANDING BELT LENGTH mm: 1370 x 2150 - MAX. WORKPIECE THICKNESS mm: 160 - STEEL CALIBRATION ROLLER mm: 180 - Rubber-coated SANDING ROLLER mm: 180 - SANDING PAD WIDTH mm: 50 - BELT MOTOR POWER kW: 14.7 - BELT SPEED m/s: 18/16 - FEED MOTOR POWER HP: 0.75 - Variable speed drive for feed carpet, continuously adjustable SPEED m/min: 4/20 - HEIGHT ADJUSTMENT MOTOR HP: 0.33 - Mechanical BELT OSCILLATION “ECO GEAR PATENT SYSTEM” - 1 pc. DRUM BRAKE for belt braking - Pivoting ROLLER for belt tensioning - 3 pcs. PRESSURE ROLLERS; rubber-coated - EMERGENCY STOP STRIP at infeed - ELECTRONIC DISPLAY of workpiece thickness - 2 pcs. ROLLER TABLES with 2 rollers each at infeed and outfeed - AUTOMATIC CENTERING OF FEED CARPET - 1 EXTRACTION PORT with 160 mm diameter - AUTOMATIC TABLE POSITIONING PLEASE NOTE: New patented belt oscillation system: 1. Without valves 2. Without photoelectric barrier 3. Not sensitive to dust 4. Energy-saving, environmentally friendly system Since 2008, the machine model with this system operates continuously without lateral belt run-off! - Unitek steel calibration roller (same for all models) - Unitek flexible pressure pad before and after the roller (same for all machines with 1 roller) - Unitek grit compensation with mechanical grid-set with 6 positions (per piece – same for all models) - Unitek electronically segmented sanding pad with 24 segments (sanding width 1350) - Unitek belt motor power up to 18.4 kW instead of 14.7 kW (per motor) - Unitek surcharge for 2nd motor 14.7 kW (only for Excel 2-belt) - Unitek automatic table lowering in emergency stop (same for all models) - Unitek surcharge for frequency-controlled feed speed - Unitek surcharge for infeed/outfeed roller table with 4 rollers (same for all models) - Price per roller table - Unitek electronic control of machine functions with 12" touchscreen (same for all models) Automatic workpiece scanning with feed control --- Machine price in above configuration upon request! --- Options at additional cost: Surcharge for 3-belt machine Roller-Roller-Pad (Mod. 049): €8,390.00 Freight costs: €1,300.00 Assembly and instruction: €1,300.00 --- All prices stated are net prices plus statutory VAT (19%) --- (Technical data as per manufacturer – subject to change and errors excluded!)

Sąlyga: geras (naudotas), Gamybos metai: 2001, juostinio pjūklo ilgas: 4 500 mm, bendras aukštis: 2 100 mm, vynų diametras: 600 mm, Cutting height: 300 mm Cutting width: 570 mm Table size: 610 x 700 mm Extraction port: 120 mm Godpfovt Sxgex Abdoil Bandsaw guide: upper and lower Fence Overall machine height: approx. 2100 mm

Sąlyga: geras (naudotas), Drilling capacity in steel (diameter): 25.0/30.0 mm Throat depth: 260 mm Quill travel: 120 mm Spindle speed range: 80–1400 rpm Table clamping area: 410 x 390 mm Total power requirement: 0.8/1.5 kW Machine weight: approx. 250 kg Giedpfouhhzhjx Abdol Space requirement: approx. 0.75 x 0.6 x 1.15 m

Gamybos metai: 2023, Sąlyga: naujas, Fully automatic orbital stretch wrapper SPINNER 1500s Application: Packaging, grouping, and protection of long or bulky items such as furniture, doors, wood panels, etc. Operator side: - right in the direction of product flow General technical data: - Main motor power: 2.2 kW - Max. ring rotation speed: 50 rpm - Min. ring rotation speed: 10 rpm Gijdpfx Abjfuwmuedol - Electronic control components: Siemens, Schneider, LS - Total weight: 1,200 kg Standard equipment: - Powered conveyor belt (infeed and outfeed) for automatic product feeding - Adjustable ring rotation speed - Adjustable stretch tension with a mechanical brake system - Automatic stretch, clamping, and cutting system - Pneumatically operated top pressure units at front and rear, which press down on the product during the cutting process to hold it in place - Photoelectric sensor for automatic start of the wrapping cycle - Touchscreen panel for adjusting machine parameters to specific product requirements - Pre-programmed selection for recurrent product dimensions - Operator safety systems - Infeed and outfeed rollers Technical features: Wrapping dimensions according to diagram: - Max. length: unlimited - Min. dimensions (WxHxL): 100 x 18 x 550 mm Conveyor belt features: - Usable length: 1,924 mm - Total length: 2,000 mm - Working height: 900 mm - Electric motor power: 0.75 kW - Max. speed: 10 m/sec - Loading capacity: 150 kg/m Stretch film properties: - Max. film width: 250 mm - Max. diameter: 230 mm - Core diameter: 76 mm - Recommended material thickness: 23, 30, 35 microns

Sąlyga: naujas, Pressure: 30 t Stroke: 350 mm Table Surface Working Width: 750 x 260 mm Pressure: 221 bar Oil Capacity: 37 dm³ Maximum Working Speed: 9.8 mm/sec Return Speed: 14 mm/sec Total Power Requirement: 3 kW Machine Weight: approx. 385 kg Cylinder Inner Diameter [mm]: 130 Piston Rod Diameter [mm]: 55 Piston Bottom Diameter [mm]: 80 - Integrated pressure gauge - Pressure regulator - Hydraulic unit with variable speeds - Height-adjustable work table - Joystick control for piston and speed Godsi A S I Djpfx Abdoil The workshop press (30T) features a fixed cylinder and a motorized, height-adjustable work table. It is equipped with pressure regulation, pressure gauge, variable speed, and a joystick for moving the piston up and down. The joystick also allows you to adjust the speed, making this motorized hydraulic press ideal for precision work.

Sąlyga: naujas, Technical data: Gijdpfsgtm U Aox Abdel Working width: 1100 mm Sanding belt dimensions: 1120x2150 mm Maximum working height: 160 mm Calibrating steel roller diameter: 150 mm Rubber roller diameter: 150 mm Sanding pad width: 50 mm Total motor power for both sanding units: 11 kW Sanding belt speed: 16/18 m/s Feed motor power: 0.55 kW Variable feed belt speed: 4-20 m/min Work table motor power: 0.25 kW Pneumatic shoe, lift/lower function: YES

Gamybos metai: 1986, Sąlyga: labai geros būklės (naudotas), Dimensions (LxWxH): approx. 450 x 300 x 1700 mm Maximum drilling depth: 60 mm Gjdpfxjh Dimys Abdjil Maximum workpiece height: 350 mm Table dimensions: 250 x 250 mm Spindle speed: 430 - 9000 rpm (12 speed settings) 2 motor speeds Speed adjustment via V-belt Includes drill chuck Includes 16 A connection plug Includes base frame

Sąlyga: naujas, Drilling capacity in steel (diameter): 20 mm Throat depth: 180 mm Quill stroke: 82 mm Speed range: 220 – 2,840 rpm Table size: 290 x 290 mm Total power requirement: 0.55/0.75 kW / Volt Machine weight approx.: 54 kg Dimensions (L x W x H): 820 x 500 x 290 mm Giedoupxkdepfx Abdol Bench drill press CE-certified spindle guard. Keyless chuck (1 to 16 mm) Tilting work table. Depth stop. Packaging dimensions: 820 x 500 x 290 mm, weight 45 kg.

Sąlyga: labai geros būklės (naudotas), Panel loading at 15 cycles per minute, complete with motorized roller conveyors Loader Gijdpshv Sttofx Abdol

Sąlyga: labai geros būklės (naudotas), SINGLE-SIDED FLEXIBLE EDGE BANDING MACHINE INSERT FOR LOT 1 Edge thickness in rolls (min/max) mm 0.3 - 3 Panel thickness (min/max) mm 8 - 60 Giodoifnzdspfx Abdel Control ICOS open Feed speed m/min (adjustable) 7-35 Top pressure belt driven, spraying unit (for liquid anti-adhesive) Adjustable stop ruler CNC controlled. Panel infeed system A2 / 30 Jointing milling unit with CNC-controlled 75.34 (2 x 6.6 kW) Gluing unit (P.U.R. glue + pre-melter) 2 - VTG 3-48 + 286.205 Edge pressure zone. Edge height adjustment – CNC controlled. Edge magazine for rolls (compartment no.) 48 End trimming unit 08.42 / 30 / B (0.66 kW x 2) (PNEU 0°-25°) 30 m / min Pre-milling unit 08.0555 (1 kW x 2) Multi-profile milling unit (CNC controlled) 08.0587 (0.66 kW x 2) 4 PROFILES Sprayer unit (for sliding fluid) Contour milling unit (for fine milling) CNC controlled KFA x30 (0.5 kW x 1) 30 m/min Multi-profile scraper unit (CNC controlled) 08.516 (4 PROFILES) Flat scraper unit 08.521 (CNC controlled) Sprayer unit (for polishing fluid) Buffing unit 08.617 (0.18 kW x 4) No. 3 Universal milling units (CNC controlled) for grooving/rebating and profiling 08.190 (4.5 kW x 2 + 6.6 kW x 1)