Lenkimo/tiesinimo presas

unbekannt hydraulisch

Sąlyga: geras (naudotas), Section bending machine, bending machine, flat bar bender, horizontal bending/straightening press - Flat bar bender: hydraulic section bending machine - Base frame: on castors, table foldable on both sides - Modes of operation: manual and automatic - Accessories: see photos - Overall dimensions: 2155/1320/H1070 mm - Transport dimensions: 1320/840/H1245 mm Gisdpfx Abjh Tk Dasdsl - Weight: 404 kg

Sąlyga: naudotas, Gamybos metai: 2004, Pressure: 80 t Stroke: 16 - 63 mm Stroke rate: 100 - 750 strokes/min Column gap: 970 mm Installation height (stroke + ram adjustment at top): 380 mm Lateral column opening: 380 mm Table dimensions: 940 x 910 mm Pass-through opening in the table: 770 x 190 mm Table height above floor: 1180 mm Ram surface: 940 x 510 mm Ram adjustment: 76 mm Material width: 203 mm Material thickness: up to 6.0 mm Gjdjvuua Njpfx Abdoil Feed length: 0 - 120 mm Drive power: 37.0 kW Weight: 14.50 t Space requirement: approx. 2.7 x 1.7 x 3.6 m Approved for automatic operation according to CE standards With infinitely variable three-phase drive, pneumatic clutch/brake combination, semi-automatic stroke adjustment, automatic ram adjustment, fixed table, oil circulation lubrication Mechanical roller feed Bruderer BBV 205/120, driven via press main shaft/universal shaft Guethle CK cantilever brackets Optionally, a soundproof enclosure can be offered – price on request.

Sąlyga: naudotas, Hydraulic Wire Decoiler Hydraulically tiltable: yes For wire coils up to 2 t Year of manufacture: unknown Complete with hydraulics Gijdpfx Abjh Tafxodjl +++++ Please note that the machine is dismantled and ready for loading. For this reason, demonstration under power or the production of a video is not possible. Furthermore, our listing contains the most representative photos of the best possible quality. Unfortunately, sending additional images is not possible. +++++

Sąlyga: geras (naudotas), hidraulinės kabelių žirklės -Kabelių žirklės: hidraulinės -be: hidraulinės stoties -maks. atidarymas: 95 mm -kiekis: 1 kabelių žirklės turimos -matmenys: 530/180/A80 mm -svoris: 13,3 kg Giodped R Ew Rjfx Abdol

Gamybos metai: 1997, Sąlyga: labai geros būklės (naudotas), A used, very well-maintained cold circular saw from EISELE, equipped with a 370 mm circular saw blade, infinitely adjustable hydro-pneumatic feed, pneumatic material clamping, coolant system, and documentation. Speed: 17/34 rpm Cutting capacity: - Round 90°/45° right, left / 30° right: 130/130/105 mm Gisdekfp D Topfx Abdol - Square 90°/45° right, left / 30° right: 120x120/100x100/90x90 mm - Rectangular 90°/45° right, left / 30° right: 200x100/140x100/100x100 mm Pneumatic connection: 7 bar Working height: 900 mm Machine dimensions (W x D x H): 865 x 1332 x 2175 mm Weight: 460 kg For further technical details, please refer to the PDF document. Technical data and dimensions: subject to errors and change without notice.

Sąlyga: geras (naudotas), Gamybos metai: 1964, Guillotine shear, sheet metal shear, sheet guillotine shear, hydraulic shear, hydraulic cutting shear - Guillotine shear: hydraulic - Cutting width: 2580 mm - Max. cutting thickness: steel 2 mm / aluminum 3 mm - Required space: 3020/2000/H1320 mm Gijdpfjhr Exiex Abdol - Transport dimensions: 3020/2000/1320 mm - Weight: 3185 kg

Sąlyga: geras (naudotas), Grinding wheel dresser, cup wheel dresser, double-ended grinder dresser, surface grinding machine dresser, cylindrical grinding machine dresser, dressing head, profiling head for grinding machines, grinding wheel dresser, radius dresser, wheel dresser Godpfxjwv N Ice Abdsil -Dresser: Grinding wheel dresser with hydraulic feed -Dressing head: Without diamond tip, see photos -Dimensions: 350/70/H235 mm -Weight: 12.6 kg

Sąlyga: naudotas, Gamybos metai: 2015, mašinos/transporto priemonės numeris: A2536805, Pressure: 40 t Stroke: 250 mm Return force: 6.3 t Motor: 5.5 kW Gedpfx Asfxyhfsbdoil Max. working height: 450 mm Max. forward speed: 90 mm/sec Pressing speed: 10 mm/sec Travel distance - w: 250 mm Ram plate: 500 x 200 mm Table plate: 600 x 650 mm with T-slots Table opening: 200 x 170 mm Table height: 850 mm Oil tank: 200 l The described machine can be custom built for you. Production time is approximately 5 months from receipt of payment. Forward stroke: The press moves to the zero position at up to 90 mm/sec. Positioning accuracy is 0.5 mm or better. Return stroke: The press returns to the end position at up to 90 mm/sec. Accuracy is also 0.5 mm or better. Holding time can be set from 0 to 10 seconds (in 0.1 second increments). Pressing force is adjustable from 10 to 40 tons in bar. Additional control details: The control unit can be locked via a key switch. The key switch provides the following functions: Manual operation with two-hand control at 9.5 mm/sec in setup mode. (Stop in any desired position by releasing the switches.) Manual operation for bending tasks at up to 9.5 mm/sec using two-hand operation and automatic return to the top dead center when the two-hand buttons are released. Automatic operation with safe tools at up to 200 mm/sec. This function is equipped with a warning label on the control panel. In automatic mode, the machine is strictly suitable for the use of fully enclosed, safe tools only. This information is prominently displayed on the front of the machine. In manual setup mode, the machine can also be operated with two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. A rotary key switch enables switching between automatic and manual mode. Position adjustment for top dead center (OT) and bottom dead center (UT) and the switching position for speed reduction are performed via sensors adjustable along a chrome-plated rod. The sensor can be finely adjusted via a clamping thread – accuracy +/- 0.5 mm. The press can be equipped with a bending blade and can bend sheet metal via two-hand operation, but it can also punch, notch, and bend in automatic mode with appropriate safety tooling.

Sąlyga: geras (naudotas), Lifting rod, lifting gearbox, lifting drive, lifting linkage - Lifting rod: hydraulic lifting rod - Type: unfortunately no type designation - Part No.: 831/65 U10-2.8 - Dimensions: see photos - Measurements: 1070/210/H130 mm - Weight: 12.7 kg Giedpfx Abjwah Icsdel

Sąlyga: geras (naudotas), Wedge splitter, separation wedge, crimping pliers, hydraulic compression pliers, cable shear, cable cutter - Cable shear: splitting wedge, separation wedge, hydraulic - Intermediate dimension: 95 mm - Wedge length: 100 mm - Quantity: 3x wedge tools available Godpfxevvagds Abdjil - Price: per piece - Dimensions: 550/100/H175 mm - Weight: 13.5 kg/pc.

Sąlyga: naujas, Sheet length: 1050 mm Sheet thickness: 1.0 mm Approximate weight: 0.185 t Dimensions (LxWxH): 1.4 x 0.7 x 1.12 m Details: - with base frame - asymmetrical roller arrangement - with pre-bending - wire-inserter groove in lower and rear roller - adjustment of the lower roller via central lever Gisdpfxsd Eqrpj Abdjl - with gear train - operating manual in GERMAN and ENGLISH Catalogue available at the following link:

Sąlyga: geras (naudotas), Splitting wedge, separating wedge, crimping tool, hydraulic compression tool - Crimping tool: splitting wedge, separating wedge, hydraulic - Spacer dimension: 67 mm - Insert width: 70 mm - Quantity: 2x wedge tool available - Price: per piece - Dimensions: 410/130/H62 mm Gijdpfx Aevvafyjbdjl - Weight: 6.5 kg/piece.

Sąlyga: geras (naudotas), Cable cutter, splitting wedge, crimping pliers, hydraulic compression pliers Gijdpovvagkjfx Abdsl - Splitting wedge: separating wedge, hydraulic - Intermediate dimension: 65 mm - Insertion depth: 40 mm - Dimensions: 565/154/H105 mm - Weight: 20.1 kg

Sąlyga: geras (naudotas), Gamybos metai: 2019, Funkcionalumas: visiškai funkcionalus, vidinis ilgis: 7 400 mm, vidinis plotis: 1 600 mm, vidinis aukštis: 2 200 mm, Miltelinio dažymo milteliais - pilna gamybos linija didelėms detalėms – įskaitant krosnį 7 400 mm, pagamintą 2018–2021 m. Pilna miltelinio dažymo linija didelių gabaritų detalėms, kurią sudaro: • KROSNIS (1): Vismont KWP-440/114 – vidus: 7 400 mm ilgio – pagaminta 2018 m. • KROSNIS (2): Libra SLET40-25-20 – pagaminta 2020 m. • MILTELIŲ KABINA: Vismont KNP-1500/06 – pagaminta 2018 m. • PLOVIMO ĮRENGINYS: Libra MR35-21-17 – pagamintas 2021 m. • Rankinis PLOVIMO ĮRENGINYS: Libra MR42 – pagamintas 2020 m. • ORO FILTRAVIMO SISTEMA: Kemper 390600 – pagaminta 2016 m. Gisdpsxrd A Dsfx Abdjl • Rankinė MILTELINIO DAŽYMO SISTEMA: Nordson Encore HD MPS – pagaminta 2021 m. • SRAIGTINIS KOMPRESORIUS: Kaeser SM 15 – pagamintas 2013 m. • PORTALINIS TRANSPORTERIS • ŠAKINIS KRAUTUVAS: Hyundai 30L-7A – pagamintas 2012 m. Visi įrenginiai veikia ir yra pilnai funkcionuojantys. Kaina: priklauso, ar perkama dalis, ar visa linija.