Konvejerio juosta

Unbekannt Förderband

Sąlyga: naujas, *TECHNICAL SPECIFICATIONS:* Heating capacity: up to 36 kW Cooling capacity: up to 116 kW Medium: Oil up to 350°C Maximum external volume: 66 l at 350°C Max. flow rate: up to 150 l/min Max. delivery pressure: up to 8.0 bar Motor power: 2.8 or 4 kW Dimensions (L x W x H): 1,414 x 503 x 1,350 mm (without connections when using constant bypass) Weight: approx. 225–320 kg Heat transfer fluid connection: Flange DN25 PN16–40 (DIN EN 1092-1), Form B1 *EQUIPMENT HIGHLIGHTS:* – Control and regulation unit: smart controller (7'' touch display) – Heating control via solid-state relay – Switch cabinet IP54 – Cooling managed by solenoid valve – Flow measurement based on differential pressure principle – Bypass between supply and return line with reduced cross-section – Level monitoring by magnetic float switch – Flow monitoring by measuring heating element surface temperature and flow rate – Dirt filters in cooling water inlet and in the return flow of the circulation system – Monitoring of supply temperature by electronic safety temperature limiter – External oil filler neck – Dilo fittings on internal pipe connections (except pump connections) – At 350°C: constant bypass including bellows valves – Connection for nitrogen blanketing with pressure gauge and safety valve (0.5 bar at 350°C) (option) Visit our website for more details or for different performance classes. Kedpfx Absg Ey Rfekonf *The unit is compliant with European directives. Other directives and standards are only considered fulfilled if stated in the order confirmation. This technical specification represents the standard equipment; customer requirements deviating from the standard will be shown in quotations and/or order confirmations.*

Gamybos metai: 2025, Sąlyga: beveik kaip naujas (parodų įrenginys), Parts Cleaning Machine / Spray Cleaning System Type L102 Automatically operating hot water parts washer with basket drive via gear motor, 2 stainless steel wash pumps (manufacturer: Lowara), 2 rotating three-sided spray systems. - Basket diameter: 910 mm Knsdshymmgjpfx Abkef - Usable height: 520 mm - Maximum load weight: 200 kg - Spray pressure: 2x 3 bar - Tank capacity: 175 liters - Heating: electrically adjustable (room temperature - 90°C) System dimensions (LxWxH): 1,300 x 1,250 x 1,990h mm Empty weight: approx. 300 kg Washing timer freely adjustable (minutes and hours) Complete cleaning machine (internal and external casing) made of stainless steel 1.4301 Water circuit and loading basket made of stainless steel 1.4301 Bath cover with fine filter (2,000 micron) 2 intake filters for pump protection Steam extraction including condensate return This is a demonstration unit from the Glogar Technology Center.

Sąlyga: naudotas, Gamybos metai: 2018, System: Decanter Model: Flottweg C4E-4/454 Complete Dewatering Unit in Container Year of manufacture: 2018 Sludge throughput: approx. 0-40 m³/h Solids capacity: max. 1.2 t DS/h Equipment: double doors on face side, side entrance door, fan heater, lighting, power sockets, etc. Bowl: max. rotational speed 3,650 rpm Bowl diameter: 470 mm System: Containerized unit with swap body system for integration of subsequent plant components. Fully piped and wired, operational as a functional unit. Container unit design: Frame construction, clad with sandwich panels and fittings for swap body system transport. Accessories: FHM PolyMix 4000SP polymer make-up station, measurement equipment, control panel Feed pump: Seepex BN 52-6LS Discharge conveyor: Double trough screw conveyor SS D320 Knjdpfou R Icmsx Abkjf Dimensions: L 7,820 mm x W 2,500 mm x H 3,880 mm Empty weight: 14,500 kg Operating weight: 15,000 kg Voltage: 400 V Current consumption: 142 A Maximum power consumption: 70 kW Fuse protection: 250 A Frequency: 50 Hz Sludge inlet: DN 100 Centrate outlet: DN 200 Solids discharge: Screw conveyor Further information: see photos.

Gamybos metai: 2011, Sąlyga: beveik kaip naujas (naudotas), For sale is 1 roller conveyor including one geared motor each: Technical data: Year of manufacture: 2011 Length: 12.75 m Width: 1.40 m Height: 1.00 m Load capacity: up to 4 tons Geared motor per conveyor: SEW-EURODRIVE R87 DREE90L4 (for more details, please refer to the type plate in the photo) Knsdpfx Absihpn Neksf Three out of four roller conveyors are equipped with a continuous wooden side wall along the entire length, while one conveyor features a lateral wooden wall over a length of 5.20 m. Two out of the four conveyors are each fitted with 3 lateral removal systems. (see pictures)

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2012, Funkcionalumas: visiškai funkcionalus, padavimo eiga Y ašimi: 6 000 mm, Tipper tray for logs up to 6 m in length. Available from September 2024. Kjdpfx Absr Iig Dokjnf

Gamybos metai: 1997, Sąlyga: visiškai atnaujintas (naudotas), 2 units of process design volute casing pumps 1 unit completely overhauled: pump and motor bearings replaced with new ones. Mechanical seal refurbished by a specialist company. All seals renewed. Flow rate: 6 m³/h Delivery head: 25 m Pump speed: 1440 rpm Shaft seal: double-acting mechanical seal Manufacturer: Burgmann HRZ 13754-00 SIC/SIC/-CAR/SIC-VITON Impeller type: closed two-channel impeller Impeller diameter: 277 mm Bearing type: rolling bearings Impeller side: 1x NU411 Drive side: 2x 7311 Lubrication on drive side: oil Lubricant monitoring: oil level regulator Knedpsiuznujfx Abkef Materials: Pump casing: duplex steel Noridur 1.4593 (9.4460) Wear plate: duplex steel Noridur 1.4593 (9.4460) Pressure cover: duplex steel Noridur 1.4593 (9.4460) Shaft: tempered steel C45+N Impeller: duplex steel Noridur 1.4593 (9.4460) Bearing bracket: cast iron EN-GJL-250 Shaft sleeve: duplex steel 1.4462 Suction nozzle nominal diameter: DN 80 Discharge nozzle nominal diameter: DN 40 Suction side nominal pressure: PN 10 Discharge side nominal pressure: PN 10 Coupling manufacturer: Flender Coupling type: Eupex NH with spacer sleeve Baseplate: cast iron Motor manufacturer: AEG AM 132 Efficiency class: IE 0 Motor speed: 1476 rpm Frequency: 50 Hz Rated voltage: 400 V Motor rated power: P2 7.50 kW Thermal class: F Motor protection class: IP55 Power factor (cos phi): 0.82 Dimensions: Length: 1270 mm Width: 550 mm Height: 570 mm Weight: 300 kg Material 1.4593 Noridur is highly suitable for: - Chemical and process industry - Sulphuric and phosphoric acid - Salt extraction and processing - Petrochemical industry - Coke plants - Textile and pulp industry - Food and sugar industry - Mining/coal extraction and handling - Flue gas desulphurization plants - Acidic, chloride-containing wash suspensions - Acidic process water - Wastewater treatment plants - Offshore and marine engineering

Sąlyga: geras (naudotas), The debarker is ideally suited for debarking both hardwood and softwood logs. Carriage made of heavy-duty steel construction 5 pairs of drive wheels Kedpfx Abstuyr Iskenf Milling arm made from heavy-duty steel construction Hydraulic milling head 22 kW motor The log feeder shown in the photos is not included in the offer and is available at an additional cost of 25,000 PLN / 5,500 EUR.

Sąlyga: naujas, *TECHNICAL SPECIFICATION:* Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Consumer circuits: 1 or 2 as standard Temperature range: -45°C to +130°C Medium: Water / glycol mixture Knedpfxeg Ezare Abksf Dimensions LxWxH (without connections): 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Weight: 1-circuit: approx. 1300 kg 2-circuit: approx. 1500 kg *EQUIPMENT HIGHLIGHTS:* - Controls: Temperature control (standard) - Control via PLC with touchscreen - Analog and digital interfaces - Internal 2-circuit pump system (INFO: Ensures performance values even at low flow rates) - Heating control via solid-state relays (SSR) - Flow measurement in the internal circuit for flow monitoring (INFO: The system automatically warns and then shuts down in case of incorrect water/glycol mixture) - Pressure-controlled cooling water regulator (INFO: Significantly more precise than temperature control) - Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metal) (non-ferrous metal-free option available) - All medium-carrying components and pipelines insulated for low-temperature applications - Water-cooled condenser (air-cooled on request) *OPTIONS:* - Flow rate control: up to 100 l/min, >4 l/min +/- 5% of measured value - Pressure control: 0.5 to 4.5 bar (control range) - Compressed air monitoring - Test specimen draining via compressed air - Cooling water monitoring - Supply pressure limitation - Further custom options possible upon request and technical review Visit our website for more details or other performance classes. *This device complies with European directives. Other directives and standards are only fulfilled if specified in the order confirmation. This technical specification reflects the standard configuration; customer-specific requests differing from the standard are listed in the quotation or order confirmation.*

Sąlyga: labai geros būklės (naudotas), Four-sided planer Weinig - Maximum planing width: 230 mm - Maximum planing height: 120 mm - 5 heads: bottom - 5.5 kW; left and right - 11 kW; top - 11 kW; bottom - 5.5 kW - Feed motor: 4 kW - Fully adjustable heads - Electrically adjustable height and planing width - Spindle diameter: 40 mm - Feed via cardan shafts with stepless adjustment - Robust planer by WEINIG - Machine length: 415 cm - Machine inspected and in original condition Knodpfx Asrigxysbkef

Sąlyga: labai geros būklės (naudotas), Storti RM 500 Edger - Italian manufacture - Year of manufacture: 1993 - Electrically adjustable saw blade spacing TECHNICAL SPECIFICATIONS: - Maximum cutting width: 435 mm - Maximum cutting height: 170 mm - Motor power: 2 x 22 kW - Maximum workpiece width: 600 mm - Minimum material length: 800 mm - Maximum blade diameter: 600 mm - Spindle diameter: 40 mm - Two upper feed rolls - One upper pressure roll - Feed roll motor power: 2 x 1.1 kW - Feed rolls with automatic pressure adjustment - Seven lower driven toothed rollers - Electric adjustment of saw blades - Two lasers - Feed speed: 25 and 50 m/min - Infeed table: 2950 mm - Outfeed table: 3000 mm - Drive roller diameter: 100 mm - Feed drive motor power: 2 x 1.5 kW Transport dimensions: 500 x 240 x 180 cm Weight: 3500 kg Knjdpfxsk Talps Abksf