Diskinis pjūklas

Ulmia 1210 S

Sąlyga: labai geros būklės (naudotas), 5-Function Combined Machine (Thickness Planer, Jointer Planer, Mortising Machine, Saw, and Spindle Moulder) Thickness Planer: Usable width: 310 mm Usable height: 230 mm Cutter shaft: 3-knife strip planer knives Jointer Planer: Usable width: 310 mm Table length: 1400 mm Shaft diameter: 70 mm Iaodpfxswh U Eqj Af Iel Spindle Moulder: Spindle diameter: 30 mm, length: 125 mm Table width: 800 mm Moulder fence Saw: Saw blade diameter: 250 mm, tiltable up to 45° Cutting height with 250 mm blade: 80 mm Table width: 800 mm Parallel fence length: 635 mm Mortising Machine: Mortising capability: (0 to 16 mm) Power and Motors Voltage: 380 V Connection: Three-phase Location: Ex-stock 54634 Bitburg - Immediately available -

Sąlyga: labai geros būklės (naudotas), Line for door frames (casings), for cutting, milling of strike plates, and inserting hinges (ANUBA) comprising: X10030A) Discharge conveyor Isdpeqwyclofx Af Isal X10030B) Transfer unit X10030C) Double cutting and drilling machine "AMS" - 45° left-side cut – Drilling - 90° cut - 45° right-side cut – Drilling X10030D) Angle conveyor (90°) X10030E) Anuba hinge insertion machine "MASTERWOOD" model MULTITEC X10030F) Strike plate milling machine "MASTERWOOD" model Teknomat 3000

Sąlyga: naujas, Saw blade diameter: 315/350 mm Cutting range at 90 degrees, round: 125 mm Cutting range at 90 degrees, square: 110 mm Cutting range at 90 degrees, flat: 160x90 mm Cutting range at 45 degrees, round: 105 mm Cutting range at 45 degrees, square: 90 mm Cutting range at 60 degrees, flat: 80x100 mm Total connected load: 1.8/2.5 kW Machine weight: approx. 0.2 t Space requirement: approx. 0.6 x 1.22 x 1.06 m The large workshop saw with advanced technology. (20070) • For mitre cuts to the right and left up to 45°, end stop at 90° and 45° left • Suitable for cutting steel, stainless steel, and, to a certain extent, aluminium profiles • Vice with quick-release lever, longitudinally adjustable clamping jaw, adjustable guide, and double clamping arm for burr-free cuts • Taper safety clutch made of hardened steel to protect the saw blades • Large, solid cast baseplate for maximum stability and low-vibration cutting Iaodpfx Afod Iin Ts Isl • 2 speeds: 30 + 60 rpm • High-performance special gearbox with flexible coupling for heavy-duty applications • Automatic cooling directly onto the saw blade • Saw head with double bearing • 24 V safety switch in the handle with restart protection • Length stop, assembly tools NOTICE: Price is without saw blade!!!

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2009, Visapusiško durų rėmų ir apdailos juostų apdirbimo staklės Įrenginys atlieka pjovimą 0°–45°, gręžimą 45°, ekscentrinių jungčių/klipų gręžimą apdailos juostoje, lizdo-plokštelės-kontrplokštės frezavimą, gręžimą rankiniam įsukamų vyrių montavimui. Staklės komplektuojamos su kompiuteriu, kuris automatiškai valdo visus reguliavimus ir darbo ciklą. Ašys varomos bešepetiniais varikliais, visi judesiai vykdomi aukštos kokybės linijiniais guoliais. Didžiausias darbo lauko ilgis: 3 000 mm Iodpfx Afew Sd Uus Ijal Mažiausias darbo lauko ilgis: 480 mm Didžiausias detalės aukštis/storis: 98 mm Didžiausias detalės plotis: 280 mm Agregatai kiekvienoje pusėje: 2 Pjovimo agregatai kiekvienoje pusėje: 1 Gręžimo agregatai kiekvienoje pusėje: 1, su 5 grąžtų galvute Pagrindinis agregatas: 1 Frezavimo agregatas su 2 velenais Pakeliami agregatai su 45° kampu Kampo reguliavimas – programuojamas valdiklis Plotis reguliuojama – programuojamas valdiklis CE atitikties sertifikatas Svoris: 2 500 kg

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1974, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 74-4-10, Panel saw ALTENDORF F90, year of manufacture 1974 Machine No.: 74-4-10 Manufacturer: Altendorf, Germany Saw length (mm): 2600 Cutting width (mm): 1300 Max. cutting height (mm): 130 Max. saw blade diameter: 400 mm Main motor: 5.5 kW Iodpfjipvrbox Af Ieal With scoring unit 4 speed settings Manual saw blade height adjustment Approx. weight (kg): 780 Technical data subject to change

Gamybos metai: 2022, Sąlyga: naujas, Thickness Planer KD410 Weight: 205 kg Voltage: 400 V – 3 phase, power (S6) 4.4 kW / 6.6 HP Chip and dust extraction port diameter: 100 mm Planer table dimensions: 600 x 410 mm Maximum planing height: 230 mm Cutterhead diameter: 70 mm Number of knives: 3 Maximum cutting depth per pass: 4 mm Rotational speed: 5,500 rpm Feed speed: 6 m/min Accessories: - Handwheel with height indicator for thickness planer - Tersa cutterhead system Iasdpegx T Hhefx Af Ijl Location: Ex stock 54634 Bitburg - immediately available -

Sąlyga: naudotas, Working width: 4000 mm Working height: 2600 mm Number of pressing cylinders: 6 pcs. Dimensions (L/W/H): 5300 x 1250 x 3330 mm S&S Frame Press Type RP 2000, ----- CE version Robust frame construction made of thick-walled special hollow sections, sliding carriages and pressure beams with 50 mm hole grid. Continuous left-sided abutment for width pressing, lower abutment in two levels. Vertical press cylinders on special pressure beams with single-hand rapid adjustment and counterbalancing, height adjustable in 50 mm increments, long sliding carriages guarantee the long-term absorption of high pressing forces. Quick, smooth width adjustment via ball-bearing guided trolley with central locking, fixation in 50 mm increments. Upper horizontal pressing cylinder infinitely height-adjustable and equipped with weight compensation. Lower horizontal pressing cylinder with centering bores for both abutment levels, with weight compensation. Abutment and pressure plate depth: 100 mm Pressure plate and support width: 130 mm Machine is electro-hydraulically controlled, with 2 pcs. vertical press cylinders d = 50 mm, stroke 120 mm, double-acting, with counterbalancing and single-hand quick adjustment; 2 pcs. horizontal press cylinders d = 40 mm, stroke 120 mm, double-acting, with counterbalancing; 2 manual control valves, manometer, 1 pressure regulator valve from 20 to 125 bar (corresponds to 400 to 2400 kg pressing force vertically), with 3 kW three-phase motor for 400 Volt, 50 Hz operating voltage. Complete with electrical connection. Paint finish: RAL 7035 light grey with RAL 7016 anthracite grey Working area: 4000 mm x 2600 mm (length x height) Required floor space: 5300 x 1250 x 3330 mm (L x W x H) Machine includes the following options: ----- Article ,00 pcs Central pressure beam with double-acting press cylinder, weight compensation, pressure hose and shut-off valve up to 2600 mm high Article ,00 pcs Individual pressure regulation for central pressure beam, pressure regulation range up to max. 100 bar (for pressing cross-bar windows) Article ,00 pcs Lateral pressure device complete with double-acting press cylinder, weight compensation, pressure hose and shut-off valve; weight compensation on lower horizontal cylinder omitted Article ,00 pcs Individual pressure regulation for lateral pressure device, pressure regulation range up to max. 100 bar (for pressing cross-bar windows) Article ,00 pcs Shut-off valve on 3rd vertical cylinder Article ,00 pcs Shut-off valve on upper horizontal cylinder Article ,00 pcs Width compensation insert for pressing small frames to bridge the 1st pressure beam, including shut-off valve at 1st vertical cylinder Article ,00 pcs Basic equipment for counter-profile Required height increases by 100 mm Article All pressure plates and abutments covered with plastic Article ,00 pcs Triangular studio window press device consisting of locking device for vertical pressure beam and 3 attachable, side-guided pendulum pressure plates Ijdpfx Aju Uvaljf Ieal Article ,00 pcs Double pendulum pressure plate for pointed windows (triangle) ----- Total price in above configuration ex works: On request! -----

Sąlyga: naujas, Gamybos metai: 2025, Description Technical Data Scope of Delivery Accessories Optional Features Iajdpfx Aeff Hdmsf Ijl Ideal for demanding craftsmen and carpenters The especially long, one-piece surfacing tables facilitate easy planing of workpieces Work tables are made of cast iron, ensuring durability and sustained flatness Simultaneously opening surfacing tables with rear, spring-assisted lifting for quick and convenient conversion Thanks to the fixed extraction hood, there is no need to reconnect the extraction hose during conversion, saving valuable working time Helical steel infeed roller ensures constant and uniform wood feed Rubber outfeed roller at the thicknessing table exit ensures consistent wood extraction Material feed with four speeds Thickness table adjustment via handwheel with integrated planing height display Start/stop switch within operator reach Powerful industrial motor High machine weight ensures maximum precision and smooth operation Prepared for slot mortising attachment Quality made in Italy Dimensions and Weights Length approx. 2250 mm Width/Depth approx. 1370 mm Weight approx. 695 kg Surfacer Total table length: 2250 mm Max. cutting depth: 5 mm Fence length: 1200 mm Fence height: 150 mm Dust Extraction Connection Extraction port diameter (thicknesser): 1 x 120 mm Drive Power Main motor: 7 kW Installation Information Required length: 2250 mm Required width/depth: 1440 mm Explanation of space requirements: dimensions consider maximum travel paths or usable lengths. Thicknesser Thicknessing table length: 520 mm Thicknessing table width: 850 mm Min. working height: 3 mm Max. working height: 240 mm Min. working length: 220 mm Max. cutting depth: 5 mm Electrical Data Connection voltage: 400 V Phase(s): 3 Ph Current type: AC Mains frequency: 50 Hz Cutterblock Type: TERSA Diameter: 120 mm Number of knives: 4 pcs Speed: 5000 rpm Max. planing width: 520 mm Feed Feed speed: 5/8/12/18 m/min

Sąlyga: geras (naudotas), WIG welding machine, inverter welding machine, TIG welding unit, inverter welding unit - without torch hose package - maximum welding current: 250 A - air-cooled - incl. ground cable - gas regulator - dimensions: 370/720/H870 mm - weight: 52 kg Iajdsdzwwnopfx Af Iel

Sąlyga: labai geros būklės (naudotas), rida: 28 919 km, galia: 338 kW (459,55 AG), pirmoji registracija: 11/2015, kuro tipas: dyzelinas, ašių konfigūracija: 10x4, ratų bazė: 5 100 mm, kuras: dyzelinas, kuro bako talpa: 500 l, stabdžiai: variklio stabdymas, spalva: raudona, vairuotojo kabina: miegamoji kabina, pavaros tipas: automatinis, emisijos klasė: Euro 6, Gamybos metai: 2015, veikimo valandos: 1 219 h, Įranga: ABS, autonominis šildytuvas, centrinis užraktas, elektrinis langų reguliavimas, elektriškai reguliuojamas veidrodis, kranas, kruizo kontrolė, navigacijos sistema, oro kondicionavimas, priešrūkiniai žibintai, spoileris, suodžių filtras,