Vamzdžių lenkimo staklės

TUBEND PB 34

Būklė: naujas, Gamybos metai: 2022, Power: 1.1 kW Drilling capacity in steel / continuous drilling capacity: 30 mm / 25 mm diameter Speed range: 120 - 1810 rpm Number of speed steps: 9 Spindle taper: MK-4 (Morse taper 4) Quill stroke: 120 mm Spindle centre-to-column distance: 254 mm Table size: 475 mm x 425 mm Drilling table tilt/swivel: 45° to the left / 360° rotation Column diameter: 80 mm Quick-action drill chuck: 1 - 16 mm Weight: 132 kg Kljdpfx Aogulr Hogfsp

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, veikimo valandos: 50 h, Funkcionalumas: visiškai funkcionalus, rankos pasiekiamumas: 1 300 mm, Tobulas paketas jūsų suvirinimo automatizacijai su naujausios kartos UR10e robotų serija – nebeįsigykite CB serijos! Norite automatizuoti savo suvirinimo darbus naudojant kobotą, kad įveiktumėte būsimus iššūkius? Tuomet OH-au2mate Cobot Welding Solutions su Lorch maitinimo šaltiniu yra kaip tik jums! Idealus suderintas paketas apjungia: - aukštos kokybės robotų technologiją iš kobotų rinkos lyderio Universal Kljdpfx Ajt S U Auegfep - inovatyvią suvirinimo technologiją iš Lorch - intuityvią valdymo programinę įrangą Tiksli rinkinio sudėtis: suvirinimui paruoštas UR10e robotas, valdymo elementai, degiklio laikiklis, Translas 8XR ištraukiamasis degiklis, Lorch S5 400A maitinimo šaltinis.

Būklė: naujas, NEBES TM 275 Bandsaw – 400 V Three-phase, NEW “CE” Induction motor Cast iron frame Adjustable cutting angle from 0° to 60° Fully cast iron structure Electric pump for blade lubrication and cooling Blade tension gauge in oil bath Front controls and two cutting speeds Selector switch for excluding the coolant pump Blade guide with carbide pads (H.M.) Round cutting capacity at 0°: 220 mm Square cutting capacity at 0°: 200 x 200 mm Rectangular cutting capacity at 0°: 230 x 185 mm Round cutting capacity at 45°: 150 mm Square cutting capacity at 45°: 150 x 150 mm Rectangular cutting capacity at 45°: 150 x 200 mm Kljdpsh Nm Ncsfx Agfep Round cutting capacity at 60°: 90 mm Square cutting capacity at 60°: 90 x 90 mm Rectangular cutting capacity at 60°: 90 x 120 mm Motor power: 1.3 HP Voltage: 400 V Blade dimensions: 2450 x 27 x 0.90 mm Weight: 265 kg

Būklė: naujas, Cutting capacity at 90°: round 305 mm Cutting capacity at 90°: square 260 mm Cutting capacity at 90°: rectangular 350x200 mm Saw blade length 3375x27x0.9 mm Blade speed 37 + 74 m/min Table height 940 mm Total power requirement 1.5/1.8 kW Machine weight approx. 0.65 t Space requirement approx. 1.5 x 1.75 x 1.9 m SPECIAL OFFER PRICE!!! Double mitre metal bandsaw, hydraulic semi-automatic GBS 305 HA-I Easy - Mitre cuts up to 60° left and 45° right Kedpfjd Iipxex Agfslp - Material height sensor - Ball-bearing rotary table - Hydraulic vice, laterally adjustable - Robust, large material support - Automatic coolant system

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2025, veikimo valandos: 0 h, mašinos/transporto priemonės numeris: plate roll, valdymo tipas: CNC valdymas, automatizacijos lygis: automatinis, pavaros tipas: hidraulinis, valdiklių gamintojas: MG EVO, valdiklio modelis: EVO 4 AXIS, ritinėlių skaičius: 4, apatinio volelio skersmuo: 140 mm, viršutinio volo skersmuo: 160 mm, šoninio volelio skersmuo: 150 mm, volelio skersmuo: 200 mm, vėjo ilgis: 2 050 mm, darbinis plotis: 2 000 mm, darbinio aukščio: 700 mm, maks. lakšto storis: 6 mm, plieno lakšto storis (maks.): 6 mm, nerūdijančio plieno lakšto storis (maks.): 6 mm, aliuminio lakšto storis (maks.): 6 mm, bendras svoris: 2 200 kg, bendras ilgis: 3 200 mm, bendras plotis: 1 100 mm, bendras aukštis: 1 200 mm, galia: 4 kW (5,44 AG), įėjimo įtampa: 400 V, skaitmeninių ekranų skaičius: 4, garantijos trukmė: 12 mėnesiai, Įranga: avarinis stabdymas, dokumentacija / vadovas, grūdinti volai, kūginio lenkimo įrenginys, 4-Walzen-Biegemaschine der Marke MG, Italien, hydraulisch, Modell M2006P EVO_CNC BESCHREIBUNG: Blechbiegemaschine mit planetarischem Design und doppelter Vorbiegemöglichkeit (Double Pinch), CNC_EVO programmierbar mit automatischer Berechnung für den automatischen Biegeprozess. Kapazität: - Blechbreite: 2000 mm - Blechdicke beim Biegen: 6 mm Kedow Dnd Sepfx Agfjlp - Blechdicke bei der Vorbiegung: 4 mm Walzen: - Nutzbare Walzenbreite: 2.050 mm - Oberwalzendurchmesser: 160 mm - Unterwalzendurchmesser: 140 mm Installierte Ausstattung: • Oberflächengehärtete und fein geschliffene vier Walzen, geeignet für das Biegen von Edelstahlblechen. • Doppelte Vorbiegung (Dual Pre-Pinch) mit einstellbarem Anpressdruck je nach Blechdicke. • Hydraulische Konische Biegevorrichtung mit gehärtetem Gegenlager. • Kraftbetriebener Walzenantrieb oben/unten mit axialem Direktantrieb, alle Walzen hydraulisch angetrieben. • Kalibriersystem zur Nachbearbeitung/Rundwalzen von geschweißten Hüllen. • Elektrisches Bedienpult als abgesetzte Standkonsole mit zentralen Bedienelementen (Joysticks) und CNC-Bildschirmanzeige. • CNC-Steuerung mit 15" Touchscreen, CAD/CAM-Interface, 4-Achsen-Softwarepaket mit automatischer Berechnung. Digitale Achspositionserfassung für manuellen, halbautomatischen und vollautomatisch programmierbaren Betrieb. • Hydraulisch abklappbare Frontablage (Drop-End) zum Entladen geschlossener Zylinder. • Stufenlose Arbeitsgeschwindigkeit mit Achseninterpolation. • Sicherheitsausstattung mit Notausschalter. • Bedienungs- und Wartungsanleitungen im Lieferumfang.

Būklė: naujas, Gamybos metai: 2024, Kudu drilling and milling center with CNC control and tool changer (3-axis) Drilling and milling center with movable machining unit – the worktable remains stationary while the drill head moves. The drilling center enables both manual and fully automatic operation. After each drilling process, the machining unit automatically moves in the X and Y axes to the next drilling position. Operation is designed to be extremely user-friendly. Data can be transferred to the machine control using DXF/DWG file formats via a programming station. Alternatively, the system can also be programmed directly on the machine control panel. The system is extremely robust and constructed using proven machine components. Technical data: • Measuring length: 6,000 mm • Overall length: 8,050 mm • Sturdy machine base • Drill head speed: up to 2,500 rpm (standard version), delivered with the appropriate speed for your application • Tool holder: SK 40 • X, Y, and Z axis driven by servo motors • Rapid traverse (X-axis): 20 m/min • Rapid traverse (Y-axis): 5 m/min • Distance table top to lower edge of tool holder: 400 mm • Table width: 480 mm • Working height: 1,050 mm • Drilling diameter: 3 to 30 mm in mild steel (tool dependent) • Tapping: M4 – M30 (with floating chuck) • Y-axis travel: 300 mm • X-axis tolerance: ±0.1 mm • Y-axis tolerance: 0.06 mm • Z-axis tolerance: 0.06 mm • Main spindle drive motor: 5.5 kW • Machine weight: 2,300 kg • Machine dimensions: 8,050 mm x 3,000 mm x 2,388 mm (see layout plan) • Power connection: 32 A • Air supply: 8 bar • Front safety via light curtain • Rear access protection via machine fence • Control: 21.5" touchscreen panel, reinforced front glass • Simple programming at the machine • Capable of milling slots and circles • Lubrication via minimum quantity spray system • Without material clamps Kjdpfx Ajfu Ivzjgfslp • Remote maintenance possible via TeamViewer (LAN interface) • Tool magazine for drilling tools, including dimensions and speeds • Simulation of work sequences • Digital handwheel Your advantages: • Protects workpiece surfaces • Clear, graphical user interface • Machining directly at the workpiece end is straightforward • 50% space saving compared to moving-table designs • Chips are collected in a chip tray • Simplest programming & operation • Minimum quantity spray system (standard) • Programming errors are eliminated by CAD/CAM integration You are welcome to visit and inspect the desired machine at our manufacturing/showroom at any time. Please feel free to contact us. Plantec Maschinen GmbH

Būklė: naujas, Gamybos metai: 2024, UNIBOHRFIX 100 H Fully Automatic Drilling Machine, Measuring Length 6000mm Art. No. 6020 With the fully automatic UniBohrFix 100 drilling machine, your material is positioned on the X-axis at the desired location, clamped, and drilled. All you have to do is press the start button. Round tubes, rectangular tubes, angle profiles, as well as flat and solid materials can be conveniently clamped pneumatically into the horizontal gripper of the positioning system. After simply entering the X-values or recalling an already programmed process, the unit operates entirely autonomously. The Y-axis can be adjusted by the operator via a manual handwheel with digital display. Advantages • Sequences of holes are carried out automatically at precise intervals. • Operative errors are drastically reduced. • Programming is completed in just a few minutes. • Excellent price-performance ratio. • Significant reduction in manpower requirements. Fully automatic design Measuring length: 6,000 mm Overall length: 13,500 mm NC single-axis control Pneumatic vise (clamping width 200 mm) Minimum quantity lubrication unit with holder and spray nozzle Drilling machine: Unimax 3T AV (see technical data on datasheet) Anti-rotation device Motorized height adjustment Thread-cutting unit NC Positioning System PD 200p Feed force: 200 kg Positioning possible by absolute and incremental dimensions Carriage with DC servo motor and encoder Carriage with 12 ball bearings Pneumatic stop clamping with high holding force Steel guide rail with precision rack Steel carrier profile for contamination protection Infeed and outfeed material roller conveyor RD-200/4 Length: 6,000 mm / 7,000 mm / Load capacity 200 kg/m / Height-adjustable rollers / Mounting brackets / Roller width 407 mm / Insert plates / Bracing / Roller diameter 50 mm / Steel rollers Kjdofu Itbjpfx Agfjlp Plantec Maschinen GmbH

Būklė: naujas, Digital technology, the NEOPULSE 400 CW is a three-phase, pulsed MIG/MAG welder designed for heavy industry. Mobile and equipped with a cooling unit and a high-performance wire feed system, the NEOPULSE 400 CW is ideal for tackling the most demanding applications. Its intuitive and functional digital interface allows for easy adjustment of welding parameters. MULTIPROCESS WELDING Kjdpfx Agomxkggsfolp MIG/MAG: - Steel and stainless steel wire: Ø 0.6 to 1.6 mm - Aluminium wire: Ø 0.8 to 1.6 mm - CuSi and CuAl wire: Ø 0.8 to 1.6 mm - Cored (flux-cored) wire: Ø 0.9 to 2.4 mm MMA DC / Pulsed: basic, rutile, and cellulosic electrodes (up to Ø 6 mm). DC TIG CONTACT / PULSED. Gouging (up to Ø 6.5 mm).

Būklė: labai geros būklės (naudotas), Motorized 3x3 welding column with movement control via pendant station. Klodou Afttjpfx Agfep Usable capacity: 3x3 m Wire spool dispenser Lincoln Idealarc DC-1000 submerged arc welding unit with torch, flux hopper, and Lincoln NA-3N amperage and voltage control panel. Submerged arc duty cycle: 1000 Amps at 100%. Idealarc® DC-1000 Submerged Arc Welder Input voltage: 230/460 V Input current: 193/96.5 A Input frequency: 60 Hz Input phase: 3 Input power: 230/460/3/60 Mode icon: CC/CV Output range: 150–1300A DC, 16–46V Polarity: DC Rated output: 1000A / 44V / 100%

Būklė: naujas, Gamybos metai: 2025, THE PRACTICAL HAND PIPE BENDING DEVICE: The compact, mobile design enables precise and repeatable bending in a bench vice. The drive is operated via a screw-in handle. A lockable adjustment ring ensures repeatable bending accuracy. The interchangeable tools can be replaced with minimal effort. The 'stationary pipe and rotating tool' principle allows bending in the smallest possible space. For thin-walled pipes, sliding shoes are used for crease-free bending, allowing bends in stainless steel or copper pipes with minimal deformation. The optional version with a hexagonal drive enables use in a vice as well as the possibility to use the drive power of the bending systems 3000 and 6000. The KBV can simply be mounted onto the bending shaft of the machine. POSSIBLE APPLICATIONS: • Hydraulic pipework • Prototype construction • Plumbing and heating installation TECHNICAL DATA: • Bending capacity Ø 6 to 18 mm • Manual bending angle limiter • Maximum bending result up to 180º OPTIONAL ACCESSORIES: • KBV with hexagonal drive for bending on models 3000 or 6000 • Tool case • Length stop OUR SERVICE FOR YOU ON SITE: Kljdpfsng Amksx Agfsp • Welcome to test production at our in-house demo room • Consulting and information meetings at your site • Consultation and processing of leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance