Cilindrinės šlifavimo staklės

Tschudin HTG 400

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, centro aukštis: 150 mm, bendras ilgis: 620 mm, Mechanics: All wear parts of the machine are replaced, including the feed spindle on the X-axis. All assemblies are restored to a like-new condition. After the overhaul, the machine is comparable to a new unit. Geometry: The machine is completely disassembled down to the guideways. Before the geometry of each table and assembly is restored, both the X and Z-axis guideways are hand-scraped and restored to like-new condition. Upon completion, the machine receives a measurement protocol according to the manufacturer's specifications. Painting: After the machine's geometry is restored, it is prepared for repainting. All covers, tables, and the machine bed are stripped of old paint, cleaned, and repainted. Hydraulics: The entire lubrication system, including the lubrication unit, is replaced. The hydraulic unit is also fully overhauled. Conventional Internal Cylindrical Grinding Machine TSCHUDIN HTG 610I Machine Specifications: Technical Data: Centre height: 150 mm Centre distance: 680 mm Grinding length: 620 mm Machine Weight and Dimensions: 2,500 kg // 2340 x 1445 x 1900 mm Machine Equipment (Standard): 1x Workpiece headstock MK5 Redpfx Aourw Uyoh Hsbt 1x Operator panel 1x Mount for internal grinding spindle 1x Speed control unit for belt spindle (UJ50 / UJ80) FISCHER 1x Hydraulic unit Optional: - 2-axis digital readout system - Freely adjustable speed (1–800 rpm) incl. soft start (higher speeds possible upon clarification of technical details) - Separate low speed for part alignment

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2025, veikimo valandos: 50 h, mašinos/transporto priemonės numeris: 3018-04, Country of Manufacture: Switzerland Voltage: 380/50/3 Net Weight: 3100 kg Overall Dimensions: 230x155x170 cm Installed Power: 13 kVA Customs Code: 8460.2920 TECHNICAL SPECIFICATIONS MAIN DIMENSIONS Centre Distance: 650 mm Grinding Capacity SpW+bs -80 Stroke: 700 LONGITUDINAL SLIDE Max. Travel: SpW+50 mm Minimum Automatic Feed: 1.5 mm Speed: 50-5,500 mm/min Rbjdpfx Aew T Sd Teh Hot Reversal Dwell Time: 0-6 sec. Maximum Table Swivel: 12°/10°/8.5°/6° Pneumatic Table and Workhead Relief CROSS SLIDE Max. Travel: 300 mm Rapid Traverse: 60 mm Plunge Depth (diameter): 3.4 mm Feed 1: 0.012-6 mm/min Feed 2: 0.012-1.2 mm/min Feed per Pulse: 0.001-0.05 mm WHEELHEAD Left Wheel, Outer Grinding: 400x80x127 mm Drive Power: 5.5 kW Peripheral Speed: 35 m/s Rotational Speed: 1670/2110 rpm Internal Grinding Device for Belt-driven Spindles, incl. drive unit: 1.5 kW WORKHEAD Swivel Range: 0-90° Continuously Variable Speed: 30-1000 rpm Internal Taper: Morse 5 Clamping Collets: W-25 Drive Power: 0.55 kW Max. Workpiece Weight (between centers): 130 kg Load for Non-Supported Grinding: 100 Nm TAILSTOCK Internal Taper: Morse 3 Quill Stroke: 35 mm Fine Adjustment for Cylindricity Correction: ± 40 µm TECHNICAL CHARACTERISTICS: GUARANTEED WORKING ACCURACY Generatrix Straightness over 630 mm: 0.003 mm Roundness in Unsupported Grinding: 0.0003 mm CONNECTION VALUES Max. Power Consumption: 13 kVA Permissible Voltage Fluctuation: -15% +10% Permissible Frequency Variation: ± 3% Required Compressed Air Pressure: 5 bar Except for error or omission, the above technical data are provided without obligation.

Sąlyga: naujas, The RSM 500 A is a conventional cylindrical grinding machine from the grinding machines category, distinguished by its robust construction and long, supported guideways. Its heavy machine bed made of high-quality cast iron ensures maximum stability and precise grinding results. The swiveling table and finely adjustable hydraulic feed guarantee smooth operation, while large graduated dials on the X-axis handwheel facilitate accurate infeed. This setup is complemented by a standard position indicator with linear scales, allowing for straightforward monitoring of actual values. The machine’s versatility for internal and external cylindrical grinding, as well as taper grinding, is further enhanced by the hydraulically adjustable workhead. Buyers receive a comprehensive set of standard accessories, including an internal grinding attachment and a work lamp. Experience superior performance and precision with the RSM 500 A – request a quote now to optimize your grinding projects! Rbsdpfoncdx Nox Ah Hst

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Offered for sale is an external cylindrical grinding machine EMAG Weiss WPG 7 – high-precision external cylindrical grinding in a compact design. The WPG 7 requires only a footprint of 1,800 x 2,400 mm. This machine is ideally suited for machining small shafts or pinions. The WPG 7 can be loaded manually or equipped with automated solutions such as chain conveyors or linear gantries. CONTROL SYSTEM Fanuc 0i TECHNICAL DATA Workpiece length: max. 250 mm Grinding diameter: max. 80 mm Centre height: 100 mm Centre width: 380 mm Workpiece weight: max. 30 kg Grinding wheel diameter: max. 500 x 80 mm Rodpfxjtlrkbj Ah Hjbt Price, delivery time, and machine configuration upon request.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2015, veikimo valandos: 167 h, For sale: remotely operated, cordless mower at a bargain price—ideal for challenging conditions such as steep roadside verges or hazardous areas. (See video) Features all-wheel drive and long-range remote control. Mows up to 1,500 m² per hour. - Special winter offer! Price will increase by 20% in spring—secure your machine now! Fully functional and ready for immediate use. - Direct from a recently bankrupt Swedish company. Originally purchased new for over €25,000. All-wheel drive, remote control—everything works 100%. Purchased in December 2014, first used in spring 2015. Key specifications: Performance / Consumption: - Engine: Briggs & Stratton 950 - Displacement: 223 cc - Fuel tank capacity: 4 L / 1 gallon - Fuel: Unleaded petrol - Hydrostatic transmission - Speed: 0–4 km/h / 0–2.5 mph - Steering: wheels - Blade: 1 rotary blade - Cutting width: 56 cm / 22" - Cutting height: 4–9 cm / 2–4" - Manual clutch - Mulching kit (optional) - Area capacity: up to 1,500 m²/h - Fuel consumption: 1 L/h - Max incline: 30° / 58% - Dimensions: 1,040 x 900 x 600 mm Rbsdpsvv Hi Eefx Ah Hst - Weight: 125 kg Transport within Poland and the European Union available!

Sąlyga: naudotas, CNC Cylindrical Grinding Machine STUDER S31 CNC LeanPro with "Pictogramming" Centre distance: 1000 mm Centre height: 175 mm Swiveling grinding head (B-axis) 360° (1° increments) 2 external grinding wheels 1 internal grinding wheel External grinding wheel: 400 mm x 40 mm x 127 mm Overhauled spindle > see photos Tailstock Rbodpfowim U Hox Ah Hot MT 4 0-1000 RPM CNC Fanuc Programming: Pictogramming Heidenhain linear encoders The machine is located in our warehouse in Gussago (BS), Italy, and is under power.

Sąlyga: geras (naudotas), Distance between centres: 1000 mm Centre height: 175 mm Grinding length: 500 mm Max. grinding diameter: 300 mm Grinding wheel dimensions (OD x ID x width): Ø500 x Ø203 x 80/100 mm Rbedpfett Rawsx Ah Het Internal taper: Morse 5 Grinding wheel motor power: 7.5 kW Total power: 17 kW Longitudinal carriage travel (X-axis): 267 mm Cross carriage travel (Z-axis): 650 mm CNC brand: FANUC CNC model: 16-T Swivel range: +/- 8.5° Dimensions: 2600 mm x 2300 mm x 2100 mm Approx. weight: 4200 kg

Sąlyga: naudotas, Gamybos metai: 1995, Funkcionalumas: nepatikrintas, Atstumas tarp centrų: 650 mm Vidinis / išorinis diametras 2 ašių SONY skaitmeninis atvaizdavimas Aušinimo skysčio bakas Redpjwu Tdfsfx Ah Hsbt

Sąlyga: naudotas, Technical details: Swing diameter: 200 mm Centre distance: 450 mm Cross travel: 245 mm Longitudinal travel: 830 mm Table feed rate: 0.05-4.5 m/min, stepless Speed: grinding spindle 1,780 / 2,050 rpm Speed: workpiece spindle 50–500 rpm Grinding wheel dimensions: 350x32x127 mm Table size: 2,200x280 mm Table swivels both sides: 9° forward, 10° backward Total power requirement: 6.0 kW Machine weight approx.: 2.2 t Machine dimensions: 2.2x2.05x1.6 m UNIVERSAL CENTRE GRINDING MACHINE without internal grinding device - For precision grinding of external (and internal) as well as tapered surfaces. - Grinding spindle head infeed manually or hydraulically - Hydraulic, stepless table feed - Grinding spindle swivels 60° - Workpiece spindle head swivels 90°, with Morse taper MK 4 - Tailstock with Morse taper MK 3 Rbedpfx Aheu Ng Dgs Het Equipment: - Wheel dressing device - Coolant tank incl. pump and feed line in current condition.

Sąlyga: naudotas, Gamybos metai: 1989, Funkcionalumas: visiškai funkcionalus, ruošinio svoris (maks.): 20 kg, šlifavimo ilgis: 650 mm, šlifavimo disko skersmuo: 350 mm, bendras plotis: 3 400 mm, bendras ilgis: 3 450 mm, bendras aukštis: 2 000 mm, šlifavimo skersmuo: 80 mm, šlifavimo veleno variklio galia: 12 W, bendras svoris: 1 900 kg, For sale: Studer S 20-4 CNC cylindrical grinder Technical specifications: Axis travel: X-axis: 80 mm Z-axis: 650 mm Table stroke: 1–650 mm Grinding wheel diameter: max. 350 mm, Wheel bore: 127 mm Spindle speeds: 1600, 1975, 2000 rpm Maximum workpiece weight: 20 kg Control unit: Siemens Sinumerik 3 Power: 12 kW Rjdpevdyg Tefx Ah Hsbt Year of manufacture: 1989 Dimensions: Machine weight: 1,900 kg Machine dimensions (L x W x H): 3400 x 3450 x 2000 mm