Lazerinio pjaustymo staklės

TRUMPF TruLaserCell 8030 (L45)

Gamybos metai: 2010, Sąlyga: paruoštas naudoti (naudotas), A CNC turret punching machine Amada and an automatic loading and unloading unit LKI Käldman (Amada) are available. 1) CNC turret punching machine Amada EMZ3610, year of manufacture: 2010, punching force: 300kN, X/Y travel: 2500mm/1525mm, X/Y travel with repositioning: 5000mm/1525mm, max. material thickness: 4.5mm, max. table load: 160kg. Travel speed X/Y: 100m/80m/min, axis speed: 128m/min, positioning accuracy: +/-0.1mm. 45 turret stations, auto-index stations: 2xB/2xC, turret speed: 30 rpm, strokes per minute: 1000, machine weight: approx. 21,000kg. 2) Loading and unloading system LKI Käldman (Amada) MP Sheetcat 3015, year of manufacture: 2017, min. sheet dimensions X/Y: 1000mm/300mm, max. sheet dimensions X/Y: 3050mm/1525mm, sheet thickness: 0.8mm-6mm, max. sheet weight per pallet: 3000kg, suction cups: 34. Machine dimensions X/Y/Z: approx. 8400mm/3600mm/3100mm. Documentation available. An on-site inspection is possible. Itsdpfx Absv Rp Tcjker

Sąlyga: geras (naudotas), Gamybos metai: 2000, bendras aukštis: 47 000 mm, bendras plotis: 27 000 mm, bendras ilgis: 25 000 mm, stalo plotis: 1 000 mm, stalo ilgis: 1 800 mm, bendras svoris: 43 000 kg, stūmoklio plokštės plotis: 600 mm, štampo pagalvėlės eiga: 200 mm, Control system Siemens Simatic OP 27 Light barrier by Sick Separate control cabinet by Rittal Itjdpjtiwgiefx Abkor Side walkways/passages Floor-level installation

Gamybos metai: 2002, Sąlyga: naudotas, Diameter: 180 mm Workpiece length: 0 mm Workpiece width: 1350 mm Total power requirement: 65 kW Machine weight approx.: 7,500 kg Space requirement approx.: [to be completed] m T I M E S A V E R S (Netherlands) Wide-belt deburring and finishing grinding machine Model: 41 Series 1350 WRDOW-N Year of manufacture: 2002 Serial No.: 2313-03 --- Iedpfx Ajt Hw Shobkotr Grinding width approx.: 1,350 mm Maximum workpiece height approx.: 1–50 mm Feed speed, stepless: approx. 1–10 m/min Comprising the following units: 1.) Vacuum table with flat workpiece feed belt, vacuum track 780 mm in the center of the belt; belt feed motor approx. 3 kW, frequency-controlled for stepless feed 1–10 m/min; tip switch for belt forward/reverse operation; digital display for belt speed and stepless table height adjustment. Suitable for wet processing. 2.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 15/19 kW, belt speed approx. 11–22 m/sec with fine height adjustment and pneumatic oscillation across the width, various grinding belts. 3.) Vertical grinding/deburring disc (disc brush system) approx. Ø 1200 mm, consisting of self-adhesive nylon fleece available in different grades, especially for deburring and cleaning surfaces and for edge rounding of workpieces. Also suitable for workpieces with varying heights. Drive approx. 7.5 kW, disc oscillates motor-driven (2.2 kW) across the entire belt width. 4.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 18.5 kW, belt speed approx. 11 m/sec with fine height adjustment and pneumatic oscillation across the width, various grinding belts. 5.) Wet processing version = complete coolant system, consisting of band filter unit with pump integrated in the machine base, rotary union at the top of the deburring disc spindle, water return through the vacuum table, as well as water mist separator mounted above the machine with blower approx. 5.3 kW. Side doors made of stainless steel sheet. Oil skimmer, etc. 6.) Side-mounted control panel with user-friendly controls and digital position and speed display. Joystick for feed belt and table adjustment, 3x ammeters, etc., as well as workpiece pressure rollers at front and rear, emergency stop. Total drive approx.: 65 kW – 400 V – 50 Hz Weight: approx. 7,500 kg Required room height: approx. 3.50 m Condition: good – powered, ready for demonstration Delivery: ex stock – as inspected Payment: strictly net – after receipt of invoice

Sąlyga: naujas, The Durma 5-axis fiber laser cutting system will be your ideal partner for manufacturing automotive parts and other highly precise, complex 3D components. The system offers 25% more working area compared to machines of similar design. For flawless cutting performance, the robust machine body and rotary table ensure top quality. Simple fixture operation allows you to save time. Thanks to components from renowned manufacturers and the use of high-quality materials, no maintenance or servicing is required. High-quality 3D cutting can be achieved. With this technology, you benefit from reduced energy consumption and can increase your company’s profitability. The machine stands out for its speed, reliability, and design. Iodeg Adknjpfx Abketr HD-FA Technical Specifications Available with 2, 3, and 4 kW laser power X-axis: 3,000 mm Y-axis: 1,500 mm Z-axis: 650 mm B-axis: ±135° C-axis: ±360°xn Maximum vector speed: 173 m/min Maximum vector acceleration: 1.73 G Positioning accuracy: ±0.08 mm Repeatability: ±0.08 mm MACHINE DIMENSIONS Machine size: 6,168 mm x 3,936 mm h=3,700 mm Working area: 9,000 mm x 10,000 mm (safe area) Rotary table door clearance: 4,000 mm Machine weight: 16,000 kg Cutting head: Type: 3D Focus type: Automatic Control unit: CNC Siemens Sinumerik 840D SK Screen: 19” touchscreen Filtration Capacity: 2,500 m³/h - 4 kW

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2004, Clamping force: 25/35 tons Opening stroke: 200 mm Mould height: 150-300 mm Distance between mounting plates: 350-500 mm Tie bar spacing: 221 mm Mould mounting platens (W x H): 342 x 250 mm Ejector stroke: 60 mm Screw diameter: 30 mm Screw stroke: 100 mm Injection volume: 70 cm³ Shot weight: 59 g Injection pressure: 1040 bar Operating hours: 34,748 Itsdjuykh Dopfx Abksr

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2011, ATLAS COPCO GA37 37kW Screw Compressor, 2011 Atlas Copco GA37 screw compressor after service Technical data: - Capacity: 6.30 m³/min Itedpfoi E Hncjx Abksr - Motor power: 37 kW - Max pressure: 8 bar - Year of manufacture: 2011 - Operating hours: 6,924 h The compressor is fully functional, ready for work, and comes with a warranty. We provide service support.

Sąlyga: naudotas, Gamybos metai: 2011, Pressure 200 t Stroke 900 mm Distance between uprights 3520 mm Distance table/ram, max. stroke up, adjustment up 1400 mm Table area 3500 x 1600 mm Ram area 3500 x 1600 mm Lateral gap between uprights 1150 mm Downward speed from 500 mm/s Upward speed up to 550 mm/s Working speed 38 mm/s Oil capacity 2000 l Itodpfx Abev Svbvoksr Drive power 90.0 + 21.0 kW Weight 34.00 t Space requirements (W x D x H) 4.4 x 3.3 x 5.5 m Approved for manual feeding according to CE standard With electro-hydraulic drive, pressure/time and stroke dependent control, cascading light barriers (Sick) at the front and rear, hydraulic ram locking, and operation possible by up to 4 operators

Gamybos metai: 2007, Sąlyga: geras (naudotas), Naudota Bystronic modelio VR giljotina – 3100 mm x 6,5 mm pardavimui Ijdpfx Absq Dpuhjkjtr Gamintojas: Bystronic Byshear Modelis: VR 6.5-31 Pjovimo pajėgumas: 6,5 mm Pjovimo ilgis: 3100 mm Pjovimo kampas: 0,5–2,5° Galinio liniuotės eiga: 1200 mm Maksimalus galinio liniuotės greitis: 180 mm/s Hidraulinė giljotina su kintamu pjovimo kampu. Įskaitant CNC valdymą CYBELEC DNC 60 su programuojamu galiniu liniuotės nustatymu. Automatinis tarpinių reguliavimas tarp pjovimo peilių. Priekinės atramos ir kampinė liniuotė. Pagaminimo metai: 2007 Parduodama Bystronic VR 6.5 x 3000 – 3 metrų x 6 mm giljotina.

Sąlyga: naudotas, Gamybos metai: 2015, TIPAS: L13 / S0540C0311 Pagaminimo metai: 2015 Lazerio veikimo laikas: 33 112 val. Spindulio veikimo laikas: 8 166 val. Iedpfx Absxd Uawokotr Galia: 5 000 W Eiga X: 4 000 mm Eiga Y: 2 000 mm Eiga Z: 750 mm Eiga B: ±135° Eiga C: n*360° Ekranas: TFT 12'' Sąsaja: SINUMERIK 840D

Sąlyga: naujas, Standard equipment: - D-Touch 7 touchscreen CNC control unit - 50 mm throat depth - 1,000 mm rear gauge with ball screw spindle - Plastic inserts for holddown clamps (material-friendly) - 1 side stop L = 1,500 mm, with scale, T-slot & tilting stop - 2 support arms L = 1,000 mm, with T-slot and tilting stop - Table sheets with ball rollers - Infinitely adjustable cutting length - Manual blade gap adjustment - Automatically retractable rear gauge - Cutting line illumination - Upper blade can be rotated twice, lower blade four times Special accessories: - Light curtain finger guard - 350 mm throat depth - 500 mm throat depth - Pneumatic sheet support device 'Durma I' - Pneumatic sheet support device without sheet return 'Durma IV' - Rear sheet guide - 1,250 mm rear gauge - Hydraulic anti-rotation device for SBT 3016 and SBT 4013 - Additional support arm, L = 2 m, with vertical support - Additional support arm, L = 3 m, with vertical support - Extension arm, L = 2 m, with vertical support - Extension arm, L = 3 m, with vertical support - Side stop extension, L = 2 m, with vertical support - Side stop extension, L = 3 m, with vertical support - Right side stop, L = 1,500 mm, with scale and T-slot, with vertical support - Ball insert in side stop or support arms - Adjustable angle stop 0–180° - CNC-controlled, motorized blade gap adjustment - Laser cutting line - Spare blades – 1 set of upper and lower blades - Oil cooler - Special paint finish - Control panel on the opposite side Ijdpfjn Urhvox Abkotr - Oil heating - Control cabinet air conditioning DURMA D-Touch 7 - 7-inch color touchscreen - USB interface - Ethernet: RJ-45 10/100M - Integrated database for automatic blade gap and cutting angle adjustment depending on material and sheet thickness - Program creation - Stroke counter - User-friendly - Fast data entry Control system: - DURMA D-Touch 7 - 7-inch color touchscreen - USB interface - Ethernet: RJ-45 10/100M - Integrated database for automatic blade gap and cutting angle adjustment depending on material and sheet thickness - Program creation - Stroke counter - User-friendly - Fast data entry Are you interested in this specific machine model or do you have any specific questions about it? Feel free to send us a message via the contact form. We will respond promptly!