Lazerinio pjaustymo staklės

TRUMPF TruLaser 5060 Co2 / 5kW

Gamybos metai: 2020, Sąlyga: naujas, DESCRIPTION The so-called half-water is produced in the demineralised water station using ion exchange technology. The station consists of 3 columns: - Strongly acidic cation exchanger in the sodium cycle, - Strongly basic anion exchanger operating in the chloride cycle, - Carbon filter Our RDI-2 / RDI-4 demineralisation stations are equipped with fully automatic control heads. The columns are made of AISI316L stainless steel. Kdedpfx Aefz Naksf Isg

Gamybos metai: 1997, Sąlyga: visiškai atnaujintas (naudotas), 2 units of process design volute casing pumps 1 unit completely overhauled: pump and motor bearings replaced with new ones. Mechanical seal refurbished by a specialist company. All seals renewed. Flow rate: 6 m³/h Delivery head: 25 m Pump speed: 1440 rpm Shaft seal: double-acting mechanical seal Manufacturer: Burgmann HRZ 13754-00 SIC/SIC/-CAR/SIC-VITON Impeller type: closed two-channel impeller Impeller diameter: 277 mm Bearing type: rolling bearings Impeller side: 1x NU411 Drive side: 2x 7311 Lubrication on drive side: oil Lubricant monitoring: oil level regulator Materials: Pump casing: duplex steel Noridur 1.4593 (9.4460) Wear plate: duplex steel Noridur 1.4593 (9.4460) Pressure cover: duplex steel Noridur 1.4593 (9.4460) Shaft: tempered steel C45+N Impeller: duplex steel Noridur 1.4593 (9.4460) Bearing bracket: cast iron EN-GJL-250 Shaft sleeve: duplex steel 1.4462 Suction nozzle nominal diameter: DN 80 Discharge nozzle nominal diameter: DN 40 Suction side nominal pressure: PN 10 Discharge side nominal pressure: PN 10 Coupling manufacturer: Flender Coupling type: Eupex NH with spacer sleeve Baseplate: cast iron Motor manufacturer: AEG AM 132 Efficiency class: IE 0 Motor speed: 1476 rpm Frequency: 50 Hz Rated voltage: 400 V Motor rated power: P2 7.50 kW Thermal class: F Motor protection class: IP55 Power factor (cos phi): 0.82 Dimensions: Length: 1270 mm Width: 550 mm Height: 570 mm Weight: 300 kg Kedpfjiuznuex Af Ijdg Material 1.4593 Noridur is highly suitable for: - Chemical and process industry - Sulphuric and phosphoric acid - Salt extraction and processing - Petrochemical industry - Coke plants - Textile and pulp industry - Food and sugar industry - Mining/coal extraction and handling - Flue gas desulphurization plants - Acidic, chloride-containing wash suspensions - Acidic process water - Wastewater treatment plants - Offshore and marine engineering

Sąlyga: geras (naudotas), Viessmann Refrigeration/Freezing Chamber External dimensions: 5700 x 3000 x 2450 mm Kdodpfx Afoiauifj Isg Internal dimensions: 5420 x 2700 x 2150 mm Panel thickness: 150 mm Stock status: 1 unit available Easy-to-assemble chamber Compressor unit and evaporator included We offer many other refrigeration devices, such as: refrigeration units, compressors, evaporators, condensers, chillers, cold rooms, refrigerated and gastronomic furniture, as well as machinery and equipment for restaurants and meat processing. Check our other listings or call us – not all equipment is listed on Machineseeker.

Gamybos metai: 2022, veikimo valandos: 20 h, Sąlyga: beveik kaip naujas (parodų įrenginys),

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, bendras svoris: 1 830 kg, Gamybos metai: 2011, Air Compressor Brand: Atlas Copco Model: GA75VSD FF Year of manufacture: 2011 Maximum allowable working pressure (MAWP): 12.8 bar / 185 psi / 1.28 MPa Capacity: 14.68 m³/min Voltage: 400 V Frequency: 50 Hz Motor power: 75 kW / 100 HP Rotational speed: 2,975 rpm Weight: 1,830 kg Dimensions: 2,300 x 1,100 x 2,000 mm Ksdpsv Nw A Ajfx Af Isdg Atlas Copco Air Dryer Type: ID 245 Year of manufacture: 2011 Voltage: 380/400 V, 50 Hz Power: 1.93 kW Weight: 150 kg Maximum air pressure: 13 bar Refrigerant: R410A Maximum refrigerant pressure: 42 bar Refrigerant temperature range: 1°C to 61°C Minimum refrigerant pressure: 1.2 bar

Sąlyga: labai geros būklės (naudotas), Kaeser Omega 83 P pūstuvo blokas, atnaujintas, 12 mėn. garantija, HB 1300 Kdedoncd Apopfx Af Isg

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2024, veikimo valandos: 60 h, Funkcionalumas: visiškai funkcionalus, vėsinimo galia: 497 kW (675,73 AG), įvesties srovės tipas: trifazis, aušinimo tipas: vanduo, bendras svoris: 4 364 kg, aplinkos temperatūra (maks.): 35 °C, aplinkos temperatūra (min.): −10 °C, įėjimo įtampa: 400 V, bendras plotis: 2 200 mm, bendras ilgis: 5 645 mm, bendras aukštis: 2 530 mm, garantijos trukmė: 6 mėnesiai, galia: 244 kW (331,75 AG), įėjimo srovė: 392 A, šildymo galia: 492 kW (668,93 AG), įėjimo dažnis: 50 Hz, Įranga: Tipinė plokštelė prieinama, aušinimo blokas, kompresorius, Chilleris / Šilumos siurblys Trane Tipas: CXAF150 SE XLN Ksdsw Idkuspfx Af Iodg Pagaminimo metai: 2024 Darbo valandos: apie 60h R454B Vėsinimo galia: 497 kW - 7/12°C - 35°C Šildymo galia: 492 kW - 50/55°C - 7°C COP vėsinimas: 3,05 COP šildymas: 2,62 Scroll kompresoriai 3/3 2 kontūrai EC ventiliatoriai – Ypač tylus veikimas Galimas Trane garantija: iki 2026-05-22

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2016, darbinis plotis: 3 100 mm, eigos ilgis: 350 mm, spaudimo jėga: 100 t, darbo diapazonas: 3 100 mm, Naudota, geros būklės Trumpf Trubend 3100 serijos 3000 3 metrų CNC lenkimo staklės, parduodamos. Naudojamos Trumpf Trubend 3100 B26 su prailgintu eiga ir daugiau šviesos tarp ašmenų, parduodamos. 3 metrų x 100 tonų, 6 ašių CNC lenkimo staklės. Markė/gamintojas: TRUMPF Modelis: TRUBEND 3100 B26 Ksdpfx Afsv Hru Ue Ijdg Tipas: CNC hidraulinės lenkimo staklės Pagaminimo metai: 2016 Vieta: Jungtinė Karalystė Specifikacija: Spaudimo jėga: 100 tonų Tipas: hidraulinės, žemyn veikiančios, H tipo rėmo lenkimo staklės Bendras ilgis: 3,1 m / 3 metrai Iš viso 6 ašys, iš jų 4 ašių galinis matuoklis Jutiklinis ekranas valdymui Spaudimo jėga: 1000 kN Eiga: 350 mm Stabdžio veikimo laikas: 46 ms

Sąlyga: naujas, Gamybos metai: 2024, == Demonstration Machine == ALZMETALL Column Drilling Machine ALZSTAR 40 SV Kdsdpfx Afod Hy Elj Isg with Coolant System B (Option 25) (comprising separate tank (33 l), pump with motor protection switch, complete fittings) and LED machine lamp Standard equipment: Mushroom-head emergency stop, reversing switch (for clockwise and counterclockwise operation), motor protection switch Stepless speed adjustment, digital speed display, Feed overload protection, protection class IP54, connection plug Spindle guard with electrical interlock Technical data: Drilling capacity steel E335 (St 60): 40 mm Tapping: Steel E335 (St 60): M24 Cast Iron EN-GJL-200 (GG20): M30 Short spindle: MK 3 Spindle stroke: 120 mm Throat depth: 293 mm Column diameter: 115 mm Machine table, usable surface: 514 x 360 mm T-slots, number x width x distance: 2 x 14 x 224 mm Distance spindle-table min./max.: 117/701 mm Feed: 0.10 + 0.20 mm/rev Machine height without options approx.: 1840 mm Net weight approx.: 285 kg Drive: stepless Motor: 1500 / 3000 rpm Power: 1.45 / 1.9 kW Spindle speed: 160–2250 rpm

Sąlyga: naudotas, Tool presetting device EZSET EZ400 Kdsdpfx Aeuhb Stjf Ieg