Varomas įrankių laikiklis

Traub TNL

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2007, veikimo valandos: 19 441 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 6000816, tekėjimo ilgis: 50 mm, veleno greitis (maks.): 12 000 aps./min, strypo praėjimas: 12 mm, valdiklio modelis: Mitsubishi TX-8i, priešpriešinio veleno didžiausias greitis: 12 000 aps./min, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Turning length: 50 mm Main spindle Technology: Belt-driven spindle Speed: 12,000 rpm Power: 4 kW Torque: 7 Nm Bar capacity: 12 mm Travel in Z1: 50 mm Workpiece clamping: Collet chuck Sub spindle Technology: Belt-driven spindle Speed: 12,000 rpm Power: 4 kW Torque: 7 Nm Travel in X3/Z4: 222/139 mm Rapid traverse in X3/Z4: 15 m/min Workpiece clamping: Collet chuck Tool turret I (X/Y) Technology: Turret with 6 stations (fully powered) Tool holder: Ø25 mm Driven tool speed: 8,000 rpm, 1.5 kW, 2.4 Nm Travel in X1/Y1: 35/37.5 mm Rapid traverse in X1/Y1: 15 m/min Tool turret II (X/Z) Technology: Turret with 6 stations (fully powered) Tool holder: Ø25 mm Driven tool speed: 8,000 rpm, 1.5 kW, 2.4 Nm Travel in X2/Z2: 35/50 mm Rapid traverse in X2/Z2: 15 m/min Front attachment Number of stations: 4 Tool holder: Ø28 mm Pitch: 32 mm Driven tool speed: 12,000 rpm, 4 kW, 7 Nm Number of driven stations: 4 Travel in X3/Z3: 222/139 mm Rapid traverse in X3/Z3: 15 m/min Rear attachment Number of stations: 4 Fedpfx Abex Hxv Ds Sepb Tool holder: Ø28 mm Pitch: 32 mm Driven tool speed: 8,000 rpm, 1.5 kW, 2.4 Nm Number of driven stations: 4 Travel in X4: 39 mm Rapid traverse in X4: 15 m/min MACHINE DETAILS Control: Mitsubishi TX-8i Dimensions & Weight Spindle height above floor: 1,050 mm Dimensions (L x W x H): 1,450 x 1,098 x 1,700 mm Dimensions (L x W x H) with standard coolant tank: 2,355 x 1,098 x 1,700 mm Weight with electrical cabinet, max. configuration: 2,000 kg Weight without electrical cabinet, max. configuration: 1,600 kg Weight with electrical cabinet, min. configuration: 1,200 kg Weight without electrical cabinet, min. configuration: 850 kg Operating hours Control on-time: 19,441 h Automatic operation 1: 7,607 h Automatic operation 2: 6,720 h Production time: 38,989 h Total counter: 50,536 h EQUIPMENT Chip conveyor Coolant pump Bar feeder FMB minimag 3200 Workpiece discharge device (tube) Mechanical interface pre-installed Various fixed tool holders Rinsing gun

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2013, veikimo valandos: 1 265 h, Funkcionalumas: visiškai funkcionalus, veleno greitis (maks.): 20 000 aps./min, tekėjimo skersmuo: 4 mm, Įranga: dokumentacija / vadovas, sūkių greitis be galo kintamas, Citizen R serisi otomatik torna tezgahları, küçük çaplı iş parçalarının işlenmesine yönelik olarak tasarlanmıştır. Bu makine çok az kullanılmıştır (yalnızca 15.800 parça işlenmiştir). Üretim yılı 2013. ASP-04 çubuk sürücü ile birlikte verilmektedir. Fsdpfx Ajvtanceb Sspb Satış Türkiye dışına gerçekleşirse KDV alınmaz.

Sąlyga: naudotas, Gamybos metai: 2013, veikimo valandos: 43 000 h, Funkcionalumas: visiškai funkcionalus, ašies variklio galia: 3 700 W, veleno greitis (maks.): 10 000 aps./min, bendras svoris: 5 000 kg, bendras plotis: 1 500 mm, bendras ilgis: 4 000 mm, bendras aukštis: 2 400 mm, greitas poslinkis X ašimi: 20 m/min, greitas poslinkis Y ašis: 20 m/min, greitasis eiga Z ašyje: 40 m/min, galia: 24 kW (32,63 AG), Z ašies eigos atstumas: 205 mm, Įranga: dokumentacija / vadovas, Siūlome vieną iš savo įrenginių pardavimui – planuojamo mūsų staklynų atnaujinimo metu ji bus išimta iš eksploatacijos. Tai 2013 metų gamybos TRAUB TNL 18P tekinimo staklės su judančiu velenu, kurios yra geros techninės būklės. Pardavimo priežastis – naujų technologijų įsigijimas kaip flotilės modernizavimo dalis. Dabartinis darbinių valandų skaičius – 43 000. Fjdpexdk Ukofx Ab Sspb

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2014, veikimo valandos: 53 000 h, Funkcionalumas: visiškai funkcionalus, For sale is a high-precision INDEX TRAUB TNL 32-7 in absolutely top condition. This is a former demonstration machine from TRAUB, fully equipped. The machine was purchased at the end of 2016 and has been meticulously maintained since then. This machine is sold including an extensive tooling package. The included tool holders alone (including many powered double and triple holders) have a replacement value of approximately €25,000 to €30,000. This makes the machine the ideal solution for companies looking to immediately produce highly complex parts without lengthy additional investments. • Flexibility: The machine can be used in both Swiss-type and fixed-headstock mode – a decisive advantage for changing requirements. • Condition & Operation: The machine has been operated exclusively with oil (no emulsion!) and about 95% of processing was stainless steel. This has preserved the mechanics in excellent condition. • Accessories Package: The machine features an extensive range of tool holders, including numerous powered holders (double and triple holders included). Additionally, multiple collets for main and sub spindle are included, as well as several channels for the bar loader. • Documentation: The original order confirmation, attesting to the full scope of equipment, is available for inspection. IMPORTANT NOTE ON SALE (PACKAGE DEAL): A total of three high-quality lathes are currently for sale. In addition to this TNL 32-7, two TRAUB TNK 36 machines are also available, which you can also find here on Machineseeker. If all three machines are purchased together, I can offer an unbeatable package price! If you purchase the entire package, I will include substantial extras that are not included in the standard scope of delivery, such as additional chip carts (several carts included), various tools and workbenches – everything you need for a quick start. - Location: 79115 Freiburg (DE) - Availability: The machine can be demonstrated under power and is available immediately. - Delivery scope: Includes tool holders, collets, and complete documentation. • Year of manufacture: 2014 (commissioned end of 2016) • Condition: Very well maintained, operated with oil • Control: TRAUB TX8i-s • Working area: Bar capacity Ø 32 mm • Spindles: Main and counter spindle (both up to 8,000 rpm & C-axis) • Tool carriers: • Upper: 10 stations (Dual Drive) Fodpfxox Sr I Rj Ab Sjpb • Lower: 9 stations (separate counter spindle drive) • Rear: 8 stations (prepared for internal coolant) • High-pressure package: ECO fluid system with frequency-controlled pump (20 to 80 bar) – perfect for oil operation and difficult materials. • Precision package: Additional glass scales on the X-axes. • Cooling & filtration: Paper band filter (50 µm) and air-cooled immersion cooler (4.5 kW). • Safety: Automatic CO2 extinguishing system (Kraft & Bauer) – essential for safe oil operation – and coolant mist extraction. • Software: Extensive packages for Polyform, helical, polygon turning, and gear hobbing. • Automation & peripherals: • Bar loader: FMB Turbo 3-36 (for up to 3,200 mm bar length) incl. shifting device. • Part removal: Integrated parts gripper and conveyor belt for gentle part transfer. Price: On request (attractive package deal)

Sąlyga: naudotas, CNC multi-spindle automatic lathe INDEX MS 32 C Fpjdpjuhaqbofx Ab Sjb

Sąlyga: geras (naudotas), Gamybos metai: 2013, Funkcionalumas: visiškai funkcionalus, Description: The machine is in good technical condition and can be tested by prior arrangement. The offer also includes an FMB Minimag 20/3200 bar feeder, which ensures smooth and efficient material feeding to the machine. As part of the delivery, we can also supply internal equipment – guide bushings and collets for the main spindle, sub-spindle, and feeder – for material diameters ranging from 3 to 12 mm. Maximum bar capacity mm: 20 (0.8) Z1 stroke max. mm: 205 (8.1) / 80 (3.1) Max. spindle speed rpm: 10,000 / 10,000 Power at 100% / 40% kW (hp): 2.2 / 3.7 (3.0 / 5.0) Torque at 100% / 40% Nm (ft-lbs): 14 / 23.5 (10.3 / 17.3) C-axis resolution degrees: 0.001 Rapid traverse Z1 m (in) / min: 40 (1574) Upper turret: Tool mounts – Number: 8 Driven tools – Number: 8 Power at 100% / 40% kW (hp): 1 / 2 (1.3 / 2.7) Mount diameter mm (in): 45 (1.8) Turning tool cross-section mm (in): 16 x 16 / 12 x 12 (0.6 x 0.6 / 0.5 x 0.5) X1 travel mm (in): 120 (4.7) Rapid traverse X1 m (in) / min: 20 (787) Time between chips s: [incomplete] Fpedpfx Ajx An T Ujb Seb

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2013, veikimo valandos: 40 000 h, Funkcionalumas: visiškai funkcionalus, ašies variklio galia: 6 700 W, tekėjimo ilgis: 305 mm, sukimosi skersmuo virš skersinio stumduko: 32 mm, veleno greitis (maks.): 8 000 aps./min, veleno greitis (min.): 1 aps./min, tekėjimo skersmuo: 32 mm, veleno skylė: 32 mm, bendras svoris: 7 350 kg, įvesties srovės tipas: trifazis, strypo praėjimas: 32 mm, padavimo ilgis X ašis: 140 mm, padavimo eiga Y ašimi: 65 mm, padavimo ilgis Z ašis: 305 mm, Įranga: sūkių greitis be galo kintamas, CNC Sliding Headstock Automatic Lathe Manufacturer: Traub Model: TNL 32 T-9 Control: TX8i-s Year of manufacture: 2013 Location: Sweden, still in production Availability: from January / February 2026 Operating hours: approx. 40,000 h Technical Data Spindle bore mm: 32 Max. speed rpm: 8,000 Power (100% / 25% duty cycle) kW: 6.7 / 10.7 Torque (100% / 40% duty cycle) Nm: 21 / 32 C-axis resolution degrees: 0.001 Z-slide travel mm: 305 / 127 (sliding head / fixed head mode) Rapid traverse Z m/min: 20 Sub-spindle Spindle bore mm: 30 Max. speed rpm: 6,400 Power (100% / 25% duty cycle) kW: 3.7 / 5.5 Torque (100% / 40% duty cycle) Nm: 29.4 / 43.7 C-axis resolution degrees: 0.001 X-slide travel, rapid traverse mm / m/min: 140 / 20 Z-slide travel, rapid traverse mm / m/min: 300 / 20 Fpjdpfx Abox Rwkue Sob Tool Carrier 1 Configurable as turret Number of stations: 10 Max. speed rpm: 12,000 Max. power kW: 3.4 X-slide travel, rapid traverse mm / m/min: 140 / 20 Y-slide travel, rapid traverse mm / m/min: -40/+25 / 20 Z-slide travel, rapid traverse mm / m/min: 300 / 20 Tool Carrier 2 Configurable as turret Number of stations: 10 Max. speed rpm: 12,000 Max. power kW: 3.4 X-slide travel, rapid traverse mm / m/min: 140 / 20 Y-slide travel, rapid traverse mm / m/min: -25/+40 / 20 Z-slide travel, rapid traverse mm / m/min: 320 / 20 Dimensions, Weight, Connection Data Weight: 7,350 kg (depending on equipment) Connected load kW: 28 Additional Equipment - Chip conveyor - External tank with paper band filtration unit - Bar loader: FMB Turbo 3-36, 4.2 m bar length - Guide bushes, collets, magazine bushes (?) - Tool holders, driven and static - Documentation - High-pressure coolant system - Fire suppression system + Kraft & Bauer fire suppression control The operator screen and hard drive were replaced in spring 2025 (approx. €24,000 incl. service costs) New drive belts for the main spindle and driven tools were recently replaced Service carried out according to schedule Several extremely costly spindle and drive unit overhauls, including new bearings and a new motor, were performed in 2019–2020 with 27,000 operating hours All details provided to the best of our knowledge but subject to error Sale subject to prior sale All prices are net, excluding VAT and transport

Sąlyga: naudotas, Gamybos metai: 2008, Ratų skersmuo – maks. 300 mm Modulis – maks. 8 Modulis – min. 0,7 Valdymas SINUMERIK 840 D Kūgio dalies kampas – min./maks. – 90 / +90 ° Detalės velenas – skylė 127 mm Šlifavimo disko skersmuo 50 – 230 mm Šlifavimo veleno apsukos bepakopės 7.500 aps./min Detalės veleno apsukos 700 aps./min Bendras galios poreikis 146 kW Staklių svoris apie 21 t Užimamas plotas apie 9,5 x 3,6 x 3,1 m Matavimo zondas dantų tarpui (integruotas šlifavimo galvoje) Fsdpfx Abevxww Se Sjpb Išorinis šlifavimo velenas – aušinimo sistema Alyvos rūko ištraukimas ELBARON (integruota staklėse) Aušinimo skysčio filtravimo sistema Hoffmann Naudota spiralinių kūginių krumpliaračių serijinei gamybai Nėra tvirtinimo įtaisų Nėra šlifavimo diskų / diskų flanšų Nėra formavimo ratukų

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2012, TIK 8 300 valandų! Valdymas: TX 8 i-p PAGRINDINIS VERPTUVAS Didžiausias strypo pratekėjimas: 32 mm Didžiausias detalės ilgis: - Ilgo tekinimo režimu: 245 mm - Trumpo tekinimo režimu: 125 mm Didžiausias verpstės greitis: 6 400 1/min C ašis Fpedpfxsxrf Eto Ab Sjb PRIEŠPRIEŠINĖ VERPTUVAS Didžiausias strypo pratekėjimas: 32 mm Didžiausias detalės įtvirtinimo ilgis: 250 mm Didžiausias verpstės greitis: 6 000 1/min C ašis VIRŠUTINIS ĮRANKIŲ BŪGNAS Stočių skaičius: 10 Visos stotys – varomosios Didžiausias greitis: 12 000 1/min APATINIS ĮRANKIŲ BŪGNAS Stočių skaičius: 9 Visos stotys – varomosios Didžiausias greitis: 12 000 1/min GALINIS PADALINYS Stočių skaičius: 8 iš jų varomosios – 3 (T12, T13 ir T14) T12 & T14 greitis: 12 000 1/min T13 greitis: 4 000 1/min Detalių transporterio juosta Drožlių transporterio KSS siurblys – 20 bar IFS aliejaus rūko filtras Strypų padavėjas: FMB turbo 3-36

Sąlyga: naudotas, Gamybos metai: 2011, valdiklių gamintojas: Mitsubishi, valdiklio modelis: TX-8i, Description: Main Spindle: Technology: Belt-driven spindle Speed: 12,000 rpm Power: 4 kW Torque: 7 Nm Bar capacity: 15 mm Travel in Z1: 50 mm Workpiece clamping: Collet chuck Counter Spindle: Technology: Belt-driven spindle Speed: 12,000 rpm Power: 4 kW Torque: 7 Nm Travel in X3/Z4: 222/139 mm Rapid traverse in X3/Z4: 15 m/min Workpiece clamping: Collet chuck Tool Turret I (X/Y): Technology: Turret with 6 stations (fully driven) Tool holder: ø25 mm Driven tool speed: 8,000 rpm, 1.5 kW, 2.4 Nm Travel in X1/Y1: 35/37.5 mm Rapid traverse in X1/Y1: 15 m/min Tool Turret II (X/Z): Technology: Turret with 6 stations (fully driven) Tool holder: ø25 mm Driven tool speed: 8,000 rpm, 1.5 kW, 2.4 Nm Travel in X2/Z2: 35/50 mm Rapid traverse in X2/Z2: 15 m/min Front Attachment: Number of stations: 4 Tool holder: ø28 mm Pitch spacing: 32 mm Driven tool speed: 12,000 rpm, 4 kW, 7 Nm Number of driven stations: 4 Travel in X3/Z3: 222/139 mm Rapid traverse in X3/Z3: 15 m/min Rear Attachment: Number of stations: 4 Tool holder: ø28 mm Pitch spacing: 32 mm Driven tool speed: 8,000 rpm, 1.5 kW, 2.4 Nm Number of driven stations: 4 Travel in X4: 39 mm Rapid traverse in X4: 15 m/min Fpjdpfx Aex E Inmsb Ssb Equipment/Accessories: Chip management: Chip conveyor Coolant management: Coolant pump Bar feeder: Bar loader, FMB minimag 20/3200 Finished parts removal: Workpiece discharge unit (tube) Emulsion mist extraction: Interface mechanically prepared Tool holders: Various fixed and driven holders

Sąlyga: geras (naudotas), Gamybos metai: 2004, Clamping knife head type (max.): 460 mm Knife head weight (max.): 150 kg Mounting plate diameter for knife heads (Ø): 360 mm Mounting taper for knife heads, nominal diameter Ø: 58.227 mm Travel distance - Z axis: 200 mm Chart recording magnification: ±10 - ±500 µm Machine weight approx.: 2.3 t Space requirement approx.: 2 x 1.5 x 2.03 m In the manufacturing process for spiral bevel gears, the quality of the gear cutting tools used is critical. Especially in dry cutting, achieving high gear quality and long tool life is only possible with precisely adjusted cutter heads. The Oerlikon Cutter Head Setting and Testing Device CS 200 enables quick and easy adjustment of individual cutters, checks their position, and documents the measurement results. The measuring process on the CNC-controlled testing device is semi-automated: Each step in the procedure is displayed on the screen via operator guidance. The positioning of individual cutters in the cutter head and the height of the cutter tips are managed by a special process that is largely automatic and simultaneously documented in a runout diagram. A subsequent measuring run checks the radial position of the inner and outer cutting edges of all the knives in the cutter head. If individual test parameters on the knives do not meet the specified tolerances, they can be individually readjusted. Combining a semi-automated setting sequence, operator-guided setup actions, and automated measurement procedures, cutter heads can be adjusted conveniently, quickly, and with high precision. Operator-guided setting and testing sequence: Fpodpfx Aboul Efms Sjb - Graphical display of the cutter head configuration and measurement results with tolerance monitoring - Step-by-step operator instructions in plain text (without coded information) - Simple assignment of measurement results to individual cutters - Documentation of adjustment and measurement results via printer - Setting and testing sequence suitable for stick blade cutter heads of the types ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® - Interface for neutral data

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2014, Pagrindinė pavara Fjdex D Drcopfx Ab Sspb Ašių skaičius: 9 Veleno apsukos: 8000 aps./min. Šis 9 ašių TRAUB TNL 32 šveicariško tipo tekinimo staklės pagamintos 2014 m. Įrengta TX8i-s valdymo sistema su 64 bitų RISC CNC/PLC procesoriumi, spalvotu TFT ekranu ir elektroniniu rankiniu ratuku. Pagrindinis velenas turi 32 mm skylę, staklės taip pat turi subveleną su C ašimi. Viršutinė įrankių galvutė dvigubai varoma, o apatinėje galvutėje – devyni įrankių laikikliai. Apsvarstykite galimybę įsigyti šias TRAUB TNL 32 šveicariško tipo tekinimo stakles. Dėl daugiau informacijos susisiekite su mumis. Pritaikymo tipai Tekinimas

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2014, Funkcionalumas: visiškai funkcionalus, veleno greitis (maks.): 12 000 aps./min, tekėjimo skersmuo: 32 mm, bendras svoris: 7 000 kg, greitasis eiga Z ašyje: 20 m/min, galia: 10,7 kW (14,55 AG), Įranga: dokumentacija / vadovas, drožlių transporteris, sūkių greitis be galo kintamas, C ašis Viršutinis įrankių revolveris su X/Y/Z/H ašimis ir 10 įrankių laikiklių Fpjdpfx Abjx Diglj Sjb Apatinis įrankių revolveris su X/Y/Z/H ašimis ir 9 įrankių laikikliais Galinė įranga su 8-kartiniu bendruoju pavarimu 3 įrankiams Lankstinės grandinės konvejeris Resy popierinės juostos filtras Traub įrankių stebėjimas FMB LSK 38 – pakrovimo žurnalas

Gamybos metai: 2015, Sąlyga: paruoštas naudoti (naudotas), A Traub CNC twin-spindle lathe, completely overhauled in 2025, is available. Turning length: 450 mm, spindle bore: 65 mm, spindle speed: 4000 rpm, main spindle/sub spindle power: 18.5 kW/11 kW, tool stations: 10, driven tools: 10, hydraulic capacity: 150 l, hydraulic pressure: 60 bar, connected load: 39 kW. Rapid traverse X1/X2: 15 m/min, feed force: 5000 N, feed travel: 140 mm. Rapid traverse Z1/Z2: 30 m/min, feed force: 8000 N, feed travel: 450 mm. Rapid traverse Y1: 6 m/min, feed force: 8000 N, feed travel: +/-35 mm. Machine dimensions X/Y/Z: approx. 4150 mm/2000 mm/1800 mm, weight: approx. 4,750 kg, control: Traub System TX 8F, operating hours: 12,938 h. Includes chip conveyor and LNS Quick Load bar feeder. Documentation is available. On-site inspection possible. Fpsdpfx Absv Scrbs Sob

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2022, veikimo valandos: 13 116 h, Max. bar capacity mm 20 Max. Z-axis travel sliding headstock/short turning mm 1) 205 / 80 Max. spindle speed rpm 10,000 Drive power 100%/40% duty cycle kW 3.0 / 5.5 Torque 100%/40% duty cycle Nm 5.73 / 10.5 / max. 17.2 C-axis resolution degrees 0.001 Max. rapid traverse Z m/min 20 Tool stations quantity 8 Driven tools quantity 8 Max. speed rpm 12,000 / 8,000 Tool holder diameter mm 45 Drive power 100%/40% duty cycle kW 1.0 / 2.0 Turning tool cross-section mm 16x16 / 20x20 Slide travel X mm 120 / 165 Slide travel Y mm ±25.4 Slide travel Z mm 254 / 567.5 Rapid traverse X / Y / Z m/min 20 / 20 / 40 B-axis swivel angle degrees 105 Lower turret Tool stations quantity 8 Driven tools quantity 8 Max. speed rpm 12,000 Tool holder diameter mm 45 Drive power 100%/40% duty cycle kW 1.0 / 2.0 Turning tool cross-section mm 16x16 / 20x20 Slide travel X mm 120 Slide travel Y mm ±25.4 Slide travel Z mm 155 Rapid traverse X / Y / Z m/min 20 / 20 / 40 Backworking unit Tool stations quantity 4 Fsdpewuddvjfx Ab Sjpb Slide travel X / Y / Z mm 120 / ±25.4 / 155 Holder diameter mm 25 Sub spindle Max. spindle bore mm 20 Max. speed rpm 10,000 Drive power 100%/40% duty cycle kW 3.0 / 5.5 Torque 100%/40% duty cycle Nm 5.73 / 10.5 / max. 17.2 Slide travel X mm 235.5 Slide travel Z mm 258 C-axis resolution degrees 0.001 Rapid traverse X / Z m/min 20 / 40 Coolant system base unit Pump pressure bar 3 / 8 Tank capacity l 250 Pump rate at 3 / 8 bar l/min 80 / 120 Filtration fineness µm 200 Machine dimensions Length x Width x Height mm see layout plan * Weight kg 5,000 * Connected load kW 40 (47 kVA)