Automatinės tekinimo staklės

Traub TNL20

Gamybos metai: 2015, Sąlyga: paruoštas naudoti (naudotas), A Traub CNC twin-spindle lathe, completely overhauled in 2025, is available. Turning length: 450 mm, spindle bore: 65 mm, spindle speed: 4000 rpm, main spindle/sub spindle power: 18.5 kW/11 kW, tool stations: 10, driven tools: 10, hydraulic capacity: 150 l, hydraulic pressure: 60 bar, connected load: 39 kW. Rapid traverse X1/X2: 15 m/min, feed force: 5000 N, feed travel: 140 mm. Rapid traverse Z1/Z2: 30 m/min, feed force: 8000 N, feed travel: 450 mm. Rapid traverse Y1: 6 m/min, feed force: 8000 N, feed travel: +/-35 mm. Machine dimensions X/Y/Z: approx. 4150 mm/2000 mm/1800 mm, weight: approx. 4,750 kg, control: Traub System TX 8F, operating hours: 12,938 h. Includes chip conveyor and LNS Quick Load bar feeder. Documentation is available. On-site inspection possible. Nkodjv Scrbopfx Af Ist

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2013, veikimo valandos: 1 265 h, Funkcionalumas: visiškai funkcionalus, veleno greitis (maks.): 20 000 aps./min, tekėjimo skersmuo: 4 mm, Įranga: dokumentacija / vadovas, sūkių greitis be galo kintamas, Citizen R serisi otomatik torna tezgahları, küçük çaplı iş parçalarının işlenmesine yönelik olarak tasarlanmıştır. Bu makine çok az kullanılmıştır (yalnızca 15.800 parça işlenmiştir). Üretim yılı 2013. ASP-04 çubuk sürücü ile birlikte verilmektedir. Nkedpevtancofx Af Iot Satış Türkiye dışına gerçekleşirse KDV alınmaz.

Sąlyga: naudotas, Gamybos metai: 1998, mašinos/transporto priemonės numeris: 10870, Pressing force: 50 t Adjustable ram stroke: 16 - 51 mm Ram adjustment: 64 mm Distance between uprights (L-R): 1100 mm Distance between uprights (sideways): 250 mm Table clamping surface approx.: 1080 x 650 mm Ram clamping surface approx.: 980 x 420 mm Through hole in table: 1060 x 200 mm Strokes per minute: 100 - 750 min⁻¹ Power requirement: 22 kW Machine operating hours: 16,850 h Height above floor approx.: 2471 x 1278 x 3150 mm Machine weight approx.: 9 t Nsdpfx Ajuqd Abof Iskt Standard equipment: BRUDERER precision roller feeder BBV 205 / 120

Sąlyga: naudotas, Gamybos metai: 2017, As new condition Comprising: 1 piece measuring case 12-20mm Comprising: 1 piece measuring case 20-50mm Nedpfx Afevvxvds Iekt Comprising: 1 piece measuring case 50-100mm

Sąlyga: geras (naudotas), Gamybos metai: 2004, Clamping knife head type (max.): 460 mm Knife head weight (max.): 150 kg Mounting plate diameter for knife heads (Ø): 360 mm Mounting taper for knife heads, nominal diameter Ø: 58.227 mm Travel distance - Z axis: 200 mm Nkjdpjul Efmjfx Af Iet Chart recording magnification: ±10 - ±500 µm Machine weight approx.: 2.3 t Space requirement approx.: 2 x 1.5 x 2.03 m In the manufacturing process for spiral bevel gears, the quality of the gear cutting tools used is critical. Especially in dry cutting, achieving high gear quality and long tool life is only possible with precisely adjusted cutter heads. The Oerlikon Cutter Head Setting and Testing Device CS 200 enables quick and easy adjustment of individual cutters, checks their position, and documents the measurement results. The measuring process on the CNC-controlled testing device is semi-automated: Each step in the procedure is displayed on the screen via operator guidance. The positioning of individual cutters in the cutter head and the height of the cutter tips are managed by a special process that is largely automatic and simultaneously documented in a runout diagram. A subsequent measuring run checks the radial position of the inner and outer cutting edges of all the knives in the cutter head. If individual test parameters on the knives do not meet the specified tolerances, they can be individually readjusted. Combining a semi-automated setting sequence, operator-guided setup actions, and automated measurement procedures, cutter heads can be adjusted conveniently, quickly, and with high precision. Operator-guided setting and testing sequence: - Graphical display of the cutter head configuration and measurement results with tolerance monitoring - Step-by-step operator instructions in plain text (without coded information) - Simple assignment of measurement results to individual cutters - Documentation of adjustment and measurement results via printer - Setting and testing sequence suitable for stick blade cutter heads of the types ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® - Interface for neutral data

Sąlyga: geras (naudotas), Gamybos metai: 2002, TRAUB TNL 12/7 CNC Long Turning Automatic Lathe Nodpfxjt E Dbye Af Iokt TECHNICAL DATA Bar capacity: 12 mm Main spindle stroke: 130 / 80 mm Spindle power: 4 kW Main spindle speed: 12,000 rpm Upper turret: 6 positions Lower turret: 6 positions Number of driven tools, turret: 6 Max. diameter, sub-spindle: 12 mm Sub-spindle speed: 12,000 rpm Dimensions: 2850 x 1100 x 1480 mm SCOPE OF DELIVERY Includes (not limited to): Traub TNL 12/7 CNC Turning Machine Meyrat High-Frequency Spindles, 2 units Tool holders (driven and non-driven) FMB Minimag 3200 C Bar Feeder Hydraulic unit High-pressure pump Chip conveyor Exact scope of delivery as shown in the photo series No liability is assumed for the correctness, completeness, or up-to-dateness of the information provided.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2010, 7 axes Control: FANUC 18i-TB Max. bar diameter 16 mm (main spindle) Max. bar diameter 16 mm (sub-spindle) Max. spindle stroke 205 mm Max. spindle speed 10,000 rpm Nkjdpfownd Dpjx Af Iet Tools 5-position turning tool holder on linear slide 4-position drilling unit incl. drill holders (front/rear machining) 3 driven tools for cross machining on linear slide 4 tools incl. drill holders for rear-side machining

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2020, 2 machines of the same type with automation (interlinked) HAAS control system Travel paths X/Y/Z: 711 / 406 / 394 mm Spindle speed: 12,000 rpm Tool magazine for 20 tools, BT 30 4th axis HRT 210 with tailstock Nksdpov Iypcefx Af Iet Chip conveyor Schusta automation system with YASKAWA robot

Sąlyga: naudotas, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 MAIN SPINDLE - Spindle drive power: 15 kW - Spindle speed: 5,500 rpm - Max. bar diameter: 42 mm - Minimum C-axis resolution: 0.001° SUB SPINDLE - Spindle drive power: 15 kW - Spindle speed: 5,500 rpm - Max. bar diameter: 42 mm - Minimum C-axis resolution: 0.001° - Traverse path: 330 mm TURNING-MILLING SPINDLE - Travel X/Z: 410/400 mm - Travel Y: 200 mm - B-axis stroke: -25/+115° - Minimum B-axis resolution: 0.001° - Tool type: HSK40 Nksdeuhampepfx Af Iot - Spindle speed: 30,000 rpm - Spindle drive power: 8 kW TOOL CHANGER - Tool changer type: Parapluie - Number of tools in magazine: 60 - Tool change time: 1.2 sec - Number of positions: 60 ELECTRICAL SUPPLY - Supply voltage: 400 V WEIGHT AND DIMENSIONS - Space requirement: 3,300 x 2,900 mm - Machine height: 2,100 mm - Machine weight: 5,000 kg MACHINE HOURS - Operating hours: 11,659 h ACCESSORIES - Control: Fanuc 31i model A5 - Absolute path measuring systems - Coolant tank * with high-pressure pump: 70 bar * Internal coolant supply (ICS) - Oil mist extraction: ELBARON RON/A 100 DV - Spindle cooling - Workpiece probing system: Renishaw OMP40-2 - Parts removal device - 1 NAKANISHI spindle HTS1501S: 150,000 rpm - Fire extinguishing system * * NB: Functionality not guaranteed. To be checked by a qualified company chosen by the buyer. - Bar puller

Sąlyga: naujas, Suction capacity at filter unit nozzle*: 350 m³/h Total power consumption*: 0.09 kW Operating voltage: 230 V, 50/60 Hz, 1PH + N + PE Noise level*: 52 dB(A) Dimensions L/W/H in mm: L 329 / W 374 / H 510 Colour: RAL 7035 Weight: 25 kg Manufacturer: ISI Industrieprodukte *Depending on filter configuration Special voltages or special colours available on request Application: Extraction of oil mist and smoke, suitable for small to very large machine workspaces | Oil mist separator Advantages of the ELBARON series: Njdpfxjh Rdwxj Af Iekt - 18 device variants available - Direct from the manufacturer - ISI-TRONIC as standard (digital filter control) - Electronically regulated EC fan as standard - Adjustable speed and air flow - Available as Simplex (single-stage) or Duplex (two-stage) - Wide range of air flow capacities available - Can be adapted to pollutant load and air flow requirements - Extensive range of installation and connection accessories - Quality Made in Germany We developed the ELBARON® filter series for use in metalworking with straight oil or for the separation of oil mist and smoke (oil mist separator). For many years, the digital electrostatic air filters of the ELBARON® series have been among the most powerful filters on the market and are used worldwide. Our filter units are already fully digitalized as standard and can, for example, be controlled via laptop. The ELBARON® product range includes 18 device variants and can be optimally configured in terms of size and capacity for your specific application. ELBARON® units impress with long service life and total operational reliability. Our electrostatic filter cells are dimensioned to provide the best possible filtration efficiency, service life, and trouble-free operation while maintaining economic efficiency.