Kūginių krumpliaračių šlifavimo staklės

KLINGELNBERG G 27

Gamybos metai: 2000, būklė: naudotas, x-travel 1000 mm y-travel 1600 mm z-travel 800 mm Control: WENZEL WPC 2040/FW31.351 Total power requirement: kW (not specified) Machine weight approx. 5500 kg Space requirement approx.: m (not specified) WENZEL CNC-controlled vertical 3-D coordinate measuring machine Model: LH 108 CNC Year of manufacture: 2000, but continuously serviced and calibrated by manufacturer Axis configuration: - Y-axis as long-travel measuring bridge: 1,600 mm - X-axis as measuring head carriage (cross travel): 1,000 mm - Z-axis as vertical measuring quill: approx. 800 mm Maximum workpiece weight / table load: approx. 2,250 kg Clearance under measuring bridge: approx. 900/1000 mm Gbsdpfet Hw Nyjx Afden Overall table size: approx. 2,600 x 1,250 mm Table height above floor: approx. 700 mm Table plate thickness: 380 mm Machine height: approx. 3,100 mm Weight: approx. 5,500 kg Special Features / Accessories: • Measuring table, crossbeam, and quill made from dark natural hard stone; table with 6 x 9 threaded holes for workpiece/fixture clamping • All axes are air-bearing for smooth, virtually wear-free operation; equipped with incremental scales, 0.0005 mm resolution • WENZEL CNC control type WPC 2040 / FW31.351 built into worktable (controller replaced approx. 3 years ago) • WENZEL measurement software METROSOFT QUARTIS R 12 SP 1 with SurfPro package and QUARTIS Q-DAS • RENISHAW motorized rotary and swivel head (automatically indexable in 7.5° increments), probe head model PH 10 M plus, with TP 20 probe and various probe accessories • RENISHAW probe head controller unit type PHC 10 C-3 plus, also built into the worktable • Automatic probe changer, 6-position probe magazine model MCR 20 mounted on the table • Mobile hand control panel with progressive control lever (joystick) for manual adjustment of all 3 axes with infinitely variable travel speeds • Sphere standards for table setup, work table, various clamping devices, etc. Condition: Very good – generally in stock, powered for inspection. Ready for demonstration. Disassembled by a CMM specialist at the seller and reassembled here. Delivery: Ex-stock – as is, as inspected Payment: strictly net – upon receipt of invoice.

Būklė: geras (naudotas), Gamybos metai: 2002, Wheel diameter - max. 275 mm Gbedpfjtumrpox Afdjn Wheel width 55 mm Module - max. 6 Module - min. 1 Control system 840 C Siemens Total power requirement 100 kW Machine weight approx. 16.7 t Space requirement approx. 5.2 x 2.3 x 2.4 m

Būklė: labai geros būklės (naudotas), Gamybos metai: 2014, Funkcionalumas: visiškai funkcionalus, matavimo diapazonas X ašis: 1 200 mm, matavimo diapazonas Y ašis: 2 000 mm, matavimo diapazonas Z ašis: 1 000 mm, Measuring ranges: Gbedpfx Afodv I Abedsn X-axis: 1200 mm Y-axis: 2000 mm Z-axis: 1000 mm Length measurement uncertainty (ISO 10360) E = [2.6 + 4L/1000] µm CNC control: Renishaw UCC S5 Handheld unit: Renishaw MCU-5, optionally wireless MCU-5W Temperature sensors: Renishaw Probe system: Renishaw REVO-2 5-axis scanning system Probe changer: Renishaw (Price for REVO approx. €80,000 new) Software: Inspect3D Inca V6 new license (all languages) Year of manufacture: 2014, modernized in 2017 and 2025 Exchange against other CMM possible

Būklė: labai geros būklės (naudotas), Gamybos metai: 2014, We are offering a top-quality 3D scanner from GOM: GOM ATOS IIe Rev.01. The system is fully ready for connection and comes complete with all necessary cables. Please note that the PC is password-protected, but the software is included on CD. Included are various sensor heads with the following measuring volumes: - Set 175x140 - Set 350x280 Godpfsw E I Itex Afdobn - Set 550x - Set 1000x800 The package also comprises a complete GOM PC in an aluminium case, with Linux software pre-installed—fully operational for use with the GOM ATOS IIe. Software is provided on CD, along with steel scale bars and an ATOS evaluation dongle. Also included are a spare lamp and a calibration panel (aluminium) CP20/MV 350x280mm².

Būklė: naudotas, TECHNICAL DATA - Number of axes: 5 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 20 mm - Max. machining length: 50 mm - Spindle speed: 10,000 rpm Gedpfx Aeuha Umofdebn - Spindle drive power: 3.7 kW SUB SPINDLE - Max. bar diameter: 20 mm - Travel Z: 150 mm - Travel X: 225 mm - Spindle speed: 8,000 rpm - Spindle drive power: 1.1 kW - Number of bush holders: 1 BUSH HOLDER 1 - Number of positions: 5 - Travel X/Y: 97/133 mm BACKWORKING - Number of positions: 3 ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power: 6 kW WEIGHT AND DIMENSIONS - Required space: 1063/2033 mm - Machine height: 1666 mm - Machine weight: 1,700 kg ACCESSORIES - Control unit: CINCOM 18iTB - Coolant tank - Bar feeder: IEMCA SMART 320

Būklė: naudotas, Gamybos metai: 1974, Wheel diameter - max. 400 mm Wheel width 75 mm Total power requirement 25 kW Machine weight approx. 7 t LORENZ High-Performance Gear Shaping Machine Model LS 400 Year of manufacture 1975 S/N 12592 _____ Max. external gear diameter 400 mm * (possibly larger) Max. internal gear diameter approx. 350 mm Max. gear width 75 mm Module range 0.5 - 6 Stroke length 82 mm Stroke position adjustment 0 - 100 mm Distance from shaping spindle to machine body 205 mm Spindle taper approx. MK 5 Strokes per minute roughing/finishing 118 - 1,000 /min. Table size 400 mm Table bore 125 mm Installation height between table and shaping head min./max. 190/290 mm Fixed distance shaping spindle 250 mm Table axial travel approx. 295 mm Number of teeth approx. 12 - 150 Feed range Tooth depth 0.01 - 0.063 mm /stroke -"- Radial feed at Gjdpfx Aot Hww Djfdobn tool-Ø 125 0.125 - 3.150 mm /stroke Spindle / total drive approx. 19 kW / 25 kW - 380 V - 50 Hz Weight 7,000 kg Accessories / Special equipment: • Hydrostatically guided slideway with separate hydraulic unit • Built-in intermediate plate 100 mm to increase shaping head height • Hydraulic workpiece clamping system, brand RINGSPANN, integrated in the table for flat components and internal clamping, various clamping chucks for different workpiece diameters • Infinitely variable stroke speed adjustment for roughing and finishing (SIMOREG DC-Master) • Automatic stroke speed change and automatic feed change for roughing and finishing in up to 3 cuts • Automatic and motor-driven stroke position locking at top dead center after finishing • Separate control cabinet • Integrated coolant system with chip conveyor and magnetic separator • Approx. 20 change gears Condition: Satisfactory to good, shortly demonstration-ready Delivery: Ex stock – as inspected Payment: Net – upon receipt of invoice

Būklė: naudotas, Clamping Plate – Table of a Long Planer Machine – Gbedebn Amfopfx Afdon Table Width / Clamping Width: 1,845 mm Table Length / Clamping Length: 5,505 mm 7 longitudinal T-slots for T-slot nuts: M30 T-slot pitch: 263 mm Overall Length: 6,230 mm Total Plate Height: 350 mm Weight: 11 t

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, GP300 CNC šlicavimo staklės, DRĖGNAS IR SAUSAS APDIRBIMAS pasirinktinai. Abi parinktys laisvai galimos. Gedsxqn Tqjpfx Afdsbn Siemens 840D Solution Line, 5 ašių sistema, skirta veleniniams ir diskiniams ruošiniams. Maks. Ø300 mm, maks. modulis 6, pasukimo diapazonas ±45°, ašinė eiga 440 mm, šlicavimo galia 15 kW, HSK-B80, stalas Ø300 mm, tiesioginė pavara, sūkių dažnis 90–900 sūkių/min. Didelis tikslumas, skaitmeninė pavarų technologija (Sinamics S120), automatinė galvos padėtis 0,001°, linijiniai kreiptuvai, saugos atitraukimas, temperatūros kompensavimas, visiškas gaubtas.

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2023, lazerio galia: 3 000 W, galia: 3 000 kW (4 078,86 AG), įėjimo įtampa: 380 V, įėjimo dažnis: 50 Hz, aušinimo tipas: vanduo, bendras ilgis: 6 000 mm, garantijos trukmė: 24 mėnesiai, Įranga: CE žymėjimas, aušinimo blokas, avarinis stabdymas, centralizuota tepimo sistema, dokumentacija / vadovas, dulkių šalinimas, dūmų ištraukimas, purkštukų keitiklis, NS-6022HG Rohrlaserschneidmaschine 3kW 3-Backen Profi-Rohrlaserschneidmaschine mit automatischem Beladesystem mit 6 m automatischer Entladung mit chinesischem 3D-Fasenkopf (BLT) Rohrtyp: T CE-Antistrahlungsglas Schutzeinrichtungen AVR Düsen-, Linsen-Set etc. (jeweils mehrere Stück) Gsdpfx Aewu Rm Rsfdsbn Serie: NS-HG Typ: Drei-Backen Fasfunktion: Standard Leistung: 3kW Maximale Rohrlänge: 7.000 mm Rundrohr: Ø15 mm–Ø220 mm Vierkantrohr: 15 mm x 15 mm–150 mm x 150 mm Rechteckrohr: 30 x 20 mm–160 x 80 mm Oval- / Flachovalrohr: Kurzachse ≥ 15 mm, Langachse ≤ 210 mm U-Profil: max. 20# I-Träger: max. 18# H-Träger: max. 175 x 90 mm Max. Beschleunigung: 1,0G Max. Spannfutterdrehzahl: 100 U/min Maschinengewicht: 10 t Netzanschluss: 380 VAC, 50 Hz Ausstattung: Servounterstützung (Fasnut), Staubschutz (Y-Achse), Staubschutz (X-Achse), Staubschutz (Z-Achse), Sicherheitszaun (Lichtvorhang), Null-Reststück-Technologie, Absaugung Schneidbereich, Absaugung am hinteren Futter (Hohlraum-Absaugung)

Būklė: geras (naudotas), Gamybos metai: 2012, Funkcionalumas: visiškai funkcionalus, matavimo diapazonas X ašis: 400 mm, matavimo diapazonas Y ašis: 400 mm, matavimo diapazonas Z ašis: 200 mm, X ašies eiga: 400 mm, Y ašies eiga: 400 mm, Z ašies eigos atstumas: 200 mm, įėjimo įtampa: 230 V, Įranga: Tipinė plokštelė prieinama, apšvietimas, Year of manufacture: 2012 Contact Measurement: VAST XXT E0 X/Y (1D) in [μm] at 20 ±2 °C: 1.7 + L/250 E0 XY (2D) in [μm] at 20 ±2 °C: 1.7 + L/250 E0 (3D) in [μm] at 20 ±2 °C: 1.9 + L/250 Godpfx Afjuq Nfhjdebn Scanning Probing Deviation MPE according to ISO 10360-4:2000 THP at 2.7 [μm] Single stylus probing form deviation MPE according to ISO 10360-5:2010 PFTU 1.9 [μm] Camera System: Zeiss Discovery 12 EB X/Y (1D) (5) in [μm] at 20 ±2 °C: 1.7 + L/250 EB XY (2D) (5) in [μm] at 20 ±2 °C: 1.7 + L/250 Probing deviation MPE according to ISO 10360-7:2011 PF2D (5) 1.7 [μm] Image processing system probing deviation MPE according to ISO 10360-7:2011 PFV2D (5) 1.2 [μm] Available services: Delivery, commissioning