Įrankio laikiklis su varomu kampiniu galvute

Traub TNL 18

Sąlyga: naudotas, Gamybos metai: 2013, veikimo valandos: 43 000 h, Funkcionalumas: visiškai funkcionalus, ašies variklio galia: 3 700 W, veleno greitis (maks.): 10 000 aps./min, bendras svoris: 5 000 kg, bendras plotis: 1 500 mm, bendras ilgis: 4 000 mm, bendras aukštis: 2 400 mm, greitas poslinkis X ašimi: 20 m/min, greitas poslinkis Y ašis: 20 m/min, greitasis eiga Z ašyje: 40 m/min, galia: 24 kW (32,63 AG), Z ašies eigos atstumas: 205 mm, Įranga: dokumentacija / vadovas, Siūlome vieną iš savo įrenginių pardavimui – planuojamo mūsų staklynų atnaujinimo metu ji bus išimta iš eksploatacijos. Tai 2013 metų gamybos TRAUB TNL 18P tekinimo staklės su judančiu velenu, kurios yra geros techninės būklės. Pardavimo priežastis – naujų technologijų įsigijimas kaip flotilės modernizavimo dalis. Dabartinis darbinių valandų skaičius – 43 000. Gbjdoxdk Ukopfx Abdog

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2022, veikimo valandos: 13 116 h, Max. bar capacity mm 20 Max. Z-axis travel sliding headstock/short turning mm 1) 205 / 80 Max. spindle speed rpm 10,000 Drive power 100%/40% duty cycle kW 3.0 / 5.5 Torque 100%/40% duty cycle Nm 5.73 / 10.5 / max. 17.2 C-axis resolution degrees 0.001 Max. rapid traverse Z m/min 20 Tool stations quantity 8 Driven tools quantity 8 Max. speed rpm 12,000 / 8,000 Tool holder diameter mm 45 Drive power 100%/40% duty cycle kW 1.0 / 2.0 Turning tool cross-section mm 16x16 / 20x20 Slide travel X mm 120 / 165 Slide travel Y mm ±25.4 Slide travel Z mm 254 / 567.5 Gedpfswuddvjx Abdobg Rapid traverse X / Y / Z m/min 20 / 20 / 40 B-axis swivel angle degrees 105 Lower turret Tool stations quantity 8 Driven tools quantity 8 Max. speed rpm 12,000 Tool holder diameter mm 45 Drive power 100%/40% duty cycle kW 1.0 / 2.0 Turning tool cross-section mm 16x16 / 20x20 Slide travel X mm 120 Slide travel Y mm ±25.4 Slide travel Z mm 155 Rapid traverse X / Y / Z m/min 20 / 20 / 40 Backworking unit Tool stations quantity 4 Slide travel X / Y / Z mm 120 / ±25.4 / 155 Holder diameter mm 25 Sub spindle Max. spindle bore mm 20 Max. speed rpm 10,000 Drive power 100%/40% duty cycle kW 3.0 / 5.5 Torque 100%/40% duty cycle Nm 5.73 / 10.5 / max. 17.2 Slide travel X mm 235.5 Slide travel Z mm 258 C-axis resolution degrees 0.001 Rapid traverse X / Z m/min 20 / 40 Coolant system base unit Pump pressure bar 3 / 8 Tank capacity l 250 Pump rate at 3 / 8 bar l/min 80 / 120 Filtration fineness µm 200 Machine dimensions Length x Width x Height mm see layout plan * Weight kg 5,000 * Connected load kW 40 (47 kVA)

Sąlyga: geras (naudotas), Gamybos metai: 2013, Funkcionalumas: visiškai funkcionalus, Description: The machine is in good technical condition and can be tested by prior arrangement. The offer also includes an FMB Minimag 20/3200 bar feeder, which ensures smooth and efficient material feeding to the machine. As part of the delivery, we can also supply internal equipment – guide bushings and collets for the main spindle, sub-spindle, and feeder – for material diameters ranging from 3 to 12 mm. Maximum bar capacity mm: 20 (0.8) Z1 stroke max. mm: 205 (8.1) / 80 (3.1) Max. spindle speed rpm: 10,000 / 10,000 Gjdsx An T Uopfx Abdebg Power at 100% / 40% kW (hp): 2.2 / 3.7 (3.0 / 5.0) Torque at 100% / 40% Nm (ft-lbs): 14 / 23.5 (10.3 / 17.3) C-axis resolution degrees: 0.001 Rapid traverse Z1 m (in) / min: 40 (1574) Upper turret: Tool mounts – Number: 8 Driven tools – Number: 8 Power at 100% / 40% kW (hp): 1 / 2 (1.3 / 2.7) Mount diameter mm (in): 45 (1.8) Turning tool cross-section mm (in): 16 x 16 / 12 x 12 (0.6 x 0.6 / 0.5 x 0.5) X1 travel mm (in): 120 (4.7) Rapid traverse X1 m (in) / min: 20 (787) Time between chips s: [incomplete]

Sąlyga: geras (naudotas), Vidinis prekės Nr.: 25091 Varomas įrankio laikiklis Reguliuojama kampinė galvutė Index / Traub Nr.: W 7045011A Gbodpfx Absxvaqlodsg Labai gerai prižiūrėta būklė! Laikiklis buvo naudotas Traub TNL18 staklėse.

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2013, veikimo valandos: 1 265 h, Funkcionalumas: visiškai funkcionalus, veleno greitis (maks.): 20 000 aps./min, tekėjimo skersmuo: 4 mm, Įranga: dokumentacija / vadovas, sūkių greitis be galo kintamas, Citizen R serisi otomatik torna tezgahları, küçük çaplı iş parçalarının işlenmesine yönelik olarak tasarlanmıştır. Bu makine çok az kullanılmıştır (yalnızca 15.800 parça işlenmiştir). Üretim yılı 2013. Gbsdpovtancefx Abdeg ASP-04 çubuk sürücü ile birlikte verilmektedir. Satış Türkiye dışına gerçekleşirse KDV alınmaz.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2013, Traub TNL 18-7B CNC Automatic Lathe Base Machine: 2441 x 1396 mm Weight: 3800 kg Spindle height above floor: 3800 mm Connected load: 24 kW Main Spindle Max. bar capacity: 18 mm Max. spindle speed: 12,000 rpm Corner speed: 5,000 rpm Travel Z: 205 mm Rapid traverse: 40 m/min Measuring system resolution Z: 0.001 mm Feed force: 3,000 N Spindle nose / short taper: Traub short taper mount Max. clamping force: 1,400 daN Max. clamping pressure: 40 bar Min. clamping pressure: 7.5 bar Piston area: 40 cm² Total cylinder stroke: 5 mm Clamping tube thread: M25 x 1 Counter Spindle Workpiece diameter: 21 mm Workpiece clamping depth: 180 mm Max. spindle speed: 12,000 rpm Travel: X: 120 mm Y: -20/+40 mm Z: 250 mm Rapid traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Max. clamping pressure: 30 bar Min. clamping pressure: 10 bar Upper Tool Turret with B-Axis Number of stations: 8 Tool shank cross-section, turning tools: 16 x 16 mm Travel: X: 120 mm Y: -25/+40 mm Z: 250 mm Rapid traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Tool-to-tool change time: 0.5 sec Measuring system resolution: X: 0.0005 mm Y: 0.0005 mm Z: 0.001 mm Lower Tool Turret Number of stations: 7 + counter spindle Tool shank cross-section, turning tools: 16 x 16 mm Travel: X: 120 mm Y: -20/+40 mm Z: 250 mm Rapid traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Tool-to-tool change time: 0.5 sec Measuring system resolution: X: 0.0005 mm Y: 0.0005 mm Z: 0.001 mm Driven Tool System for Upper Turret Number of driven stations: max. 8 Drive power: 2 kW Max. speed: 12,000 rpm Torque: 3.9 Nm Driven Tool System for Lower Turret Number of driven stations: 7 + counter spindle Drive power: 3.4 kW Max. speed: 12,000 rpm Torque: 7.3 Nm Driven Tool System, Backworking Unit Number of stations: 7 Number of driveable stations: max. 3 Pitch distance: 46 mm Drive power: 2 kW Max. speed: 7,500 rpm Torque: 4.7 Nm Drive power: 2 kW Max. speed: 4,000 rpm Torque: 11.8 Nm SCOPE OF DELIVERY Includes (not an exhaustive list): - Traub CNC lathe - Tool holders, driven and non-driven - High-pressure and band filtration system - Oil mist separator - Fire suppression system - Chip conveyor Gjdpfx Abowg Taksdobg - Bar feeder - Operating documentation Full scope of delivery according to photo series No guarantee for the accuracy, completeness or timeliness of the information provided.

Sąlyga: geras (naudotas), Vidinis prekės Nr.: 25092 Varomas įrankių laikiklis Reguliuojama kampinė galva Index / Traub Nr.: W 7045011A Labai gerai išlaikyta būklė! Gbjdpfxoxvazkj Abdjg Laikiklis buvo naudotas ant Traub TNL18.

Sąlyga: naudotas, CNC multi-spindle automatic lathe INDEX MS 32 C Gedpouhaqbofx Abdsbg

Sąlyga: naudotas, Gamybos metai: 2008, Ratų skersmuo – maks. 300 mm Modulis – maks. 8 Modulis – min. 0,7 Valdymas SINUMERIK 840 D Kūgio dalies kampas – min./maks. – 90 / +90 ° Gjdpfxevxww So Abdebg Detalės velenas – skylė 127 mm Šlifavimo disko skersmuo 50 – 230 mm Šlifavimo veleno apsukos bepakopės 7.500 aps./min Detalės veleno apsukos 700 aps./min Bendras galios poreikis 146 kW Staklių svoris apie 21 t Užimamas plotas apie 9,5 x 3,6 x 3,1 m Matavimo zondas dantų tarpui (integruotas šlifavimo galvoje) Išorinis šlifavimo velenas – aušinimo sistema Alyvos rūko ištraukimas ELBARON (integruota staklėse) Aušinimo skysčio filtravimo sistema Hoffmann Naudota spiralinių kūginių krumpliaračių serijinei gamybai Nėra tvirtinimo įtaisų Nėra šlifavimo diskų / diskų flanšų Nėra formavimo ratukų

Sąlyga: geras (naudotas), Gamybos metai: 2004, Clamping knife head type (max.): 460 mm Knife head weight (max.): 150 kg Mounting plate diameter for knife heads (Ø): 360 mm Mounting taper for knife heads, nominal diameter Ø: 58.227 mm Travel distance - Z axis: 200 mm Chart recording magnification: ±10 - ±500 µm Machine weight approx.: 2.3 t Space requirement approx.: 2 x 1.5 x 2.03 m In the manufacturing process for spiral bevel gears, the quality of the gear cutting tools used is critical. Especially in dry cutting, achieving high gear quality and long tool life is only possible with precisely adjusted cutter heads. The Oerlikon Cutter Head Setting and Testing Device CS 200 enables quick and easy adjustment of individual cutters, checks their position, and documents the measurement results. The measuring process on the CNC-controlled testing device is semi-automated: Each step in the procedure is displayed on the screen via operator guidance. The positioning of individual cutters in the cutter head and the height of the cutter tips are managed by a special process that is largely automatic and simultaneously documented in a runout diagram. A subsequent measuring run checks the radial position of the inner and outer cutting edges of all the knives in the cutter head. If individual test parameters on the knives do not meet the specified tolerances, they can be individually readjusted. Combining a semi-automated setting sequence, operator-guided setup actions, and automated measurement procedures, cutter heads can be adjusted conveniently, quickly, and with high precision. Operator-guided setting and testing sequence: - Graphical display of the cutter head configuration and measurement results with tolerance monitoring - Step-by-step operator instructions in plain text (without coded information) - Simple assignment of measurement results to individual cutters - Documentation of adjustment and measurement results via printer - Setting and testing sequence suitable for stick blade cutter heads of the types ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® Gjdpfx Abjul Efmsdjbg - Interface for neutral data