CNC tekinimo staklės

TRAUB TNC 42/65

Būklė: naudotas, Gamybos metai: 2004, mašinos/transporto priemonės numeris: 1057, CNC valdymas TRAUB sistema TX 8 H, strypo pralaida 42 mm, maksimali tekinimo ilgis 450 mm, maksimali apsisukimų dažnis 8000 aps./min., 2 revolveriai po 10 įrankių vietų, varomieji įrankiai, juostinis filtravimo įrenginys KNOLL RP, drožlių transporteris. Nwedpfx Aey Sqhisqxsg

Būklė: geras (naudotas), Gamybos metai: 2003, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 163341, Country of origin: UK Voltage: 400V 3-phase AC 50/60Hz max 58A Dimensions: 200 x 260 x 250 cm Net machine weight: 5010 kg TECHNICAL SPECIFICATIONS Capacities Table dimensions: length 900 mm / depth 410 mm X-axis travel: 560 mm Y-axis travel: 410 mm Z-axis travel: 510 mm Distance spindle nose to table surface: min 150 mm, max 660 mm Distance spindle center to column: 540 mm Maximum table load: 500 kg Spindle Speed: 40 – 12,000 rpm Power (5 min): 18.5 kW Power (10 min): 15 kW Power (30 min): 10 kW Continuous power: 7.5 kW Feed rates Rapid traverse: 36,000 mm/min Cutting feed rate: 1 to 8,000 mm/min Table Dimensions: 900 x 410 mm Nwodpew T Tp Refx Aqxsg T-slot size (ISO R299): 18 mm / Number: 3 / Spacing: 125 mm Permissible load: 500 kg Distance floor to tabletop: 780 mm ATC Tool Magazine Number of tools: 30 pcs Tool selection: random access; automatic bi-directional search Tool holder: MAS BT-40 Max tool diameter in magazine: Ø 80 mm (without adjacent tool: Ø 125 mm) Max tool weight: 8 kg Maximum magazine load: 120 kg Max tool length: 350 mm Tool change time: 2.9 sec (chip-to-chip) Lubricant reservoir: 1.8 L Axis lubrication reservoir: 260 cm³ Spindle coolant tank: 16 L Hydraulic pressure tank: 460 cm³ Coolant reservoir: 200 L Compressed air: 0.5 to 0.9 bar Capacity: 200 L/min All technical data is supplied subject to possible error or omission and is provided without guarantee.

Būklė: naudotas, Gamybos metai: 2008, mašinos/transporto priemonės numeris: 7041245, CNC valdymas Traub sistema TX8 I, strypo pralaida 42 mm, didžiausias tekinimo ilgis 450 mm, didžiausias greitis 8000 aps./min., 2 revolveriai po 10 įrankių vietų, varomi įrankiai, aušinimo įranga, drožlių transporteris KNOLL 240 S-1/50, filtravimo sistema/kompaktinė juostinė filtravimo sistema RESY Nwedpfx Aqsy Sqg Esxog

Būklė: naudotas, Gamybos metai: 2007, mašinos/transporto priemonės numeris: 7041201, CNC valdymas Traub sistema TX8 I, strypo pralaida 42 mm, maksimali tekinimo ilgis 450 mm, maksimali apsisukimų per min. 8000, 2 revolveriai po 10 įrankių vietų, varomieji įrankiai, drožlių transporteris KNOLL 240 S-1/50, filtravimo sistema/kompaktinis juostinis filtras RESY KBF 452 Nwodpey Sqhcofx Aqxsg

Būklė: naudotas, Gamybos metai: 2020, veikimo valandos: 2 652 h, Įranga: visų varančiųjų ratų pavara,

Būklė: naudotas, Gamybos metai: 2007, mašinos/transporto priemonės numeris: 7041219, CNC valdymas Traub System TX8 I, strypo pralaidumas 42 mm, maksimali tekinimo ilgis 450 mm, maksimali apsukų skaičius 8000 aps./min., 2 revolveriai po 10 įrankių vietų, varomieji įrankiai, drožlių transporteris KNOLL 240 S-1/50, filtravimo sistema/kompaktinis juostinis filtras RESY KBF 452/500 Njdpfxoy Sqg Ss Aqxewg

Būklė: naudotas, Gamybos metai: 1996, maks. strypo skersmuo: 65 mm maks. apsukimo skersmuo: 175 mm maks. strypo ilgis: 3.000 mm Valdymas: System TX 8F Eigos ilgis - x: 140 mm Eigos ilgis - z: 520 mm CNC tekinimo staklės | TRAUB - TNC 42/65 DG su strypų padavėju. Staklės yra gerai prižiūrėtos būklės. Staklių vaizdo įrašus iš gamyklos galime pateikti jūsų užklausus. Nodpfsxbtq Njx Aqxswg

Būklė: naudotas, Gamybos metai: 1996, Verpstuvo praėjimo skersmuo: 80 mm Maks. tekinimo skersmuo: 395 mm Maks. tekinimo ilgis: 750 mm Valdymo sistema: TX 8H Nwedpfexbtqvox Aqxeg Maks. verpstuvo apsisukimų skaičius: 3.150 aps./min. CNC tekinimo staklės | TRAUB - TNA 400 Staklės yra gerai prižiūrėtos būklės.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1996, veikimo valandos: 46 282 h, Funkcionalumas: visiškai funkcionalus, valdiklio modelis: TX 8F, priešpriešinio veleno didžiausias greitis: 4 000 aps./min, ruošinio skersmuo (maks.): 56 mm, Įranga: drožlių transporteris, strypų padavėjas, No minimum price – guaranteed sale to the highest bidder! Nwedpfx Ajym A E Ijqxeg By placing a bid, you commit to timely pickup either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Counter spindle max. speed: 4,000 rpm Max. workpiece diameter: 56 mm Rapid traverse: max. 15 m/min Fine interpolation cycle: 0.34 ms Maximum thread pitch: 999,999 mm Maximum radius: 99,999.999 mm Feed override: 0–200% Rapid traverse override: 0–100% Spindle speed override: 50–120% Workpiece discharge via counter spindle Programming: EIA and ISO code Input/output increment: X/Z: 0.001 mm, C-axis: 0.001° C-AXIS Main spindle: Max. speed: 80 rpm Torque at 100% duty cycle: 100 Nm Accuracy: +/- 3 minutes Counter spindle: Max. speed: 80 rpm Torque at 100% duty cycle: 30 Nm Accuracy: +/- 3 minutes Tool turret 1 & 2 Driven tools per turret: 10 (14) Max. speed: 4,000 (8,000) rpm Power at 100% duty cycle: 1.5 kW Power at 15% duty cycle: 4 kW Torque at 15% duty cycle: 12.4 (4) Nm Tool station count per turret: 10 (14) Cylinder shank per DIN 69880: Ø 30 x 55 (25 x 48) mm Tool cross-section: 20 x 20 (16 x 16) mm Chip-to-chip time (per VDI 2852): 1.2 s Index time one station: 0.6 s Over 5 stations: 1.5 s Counter spindle (numerically controlled in Z-axis) Max. speed: 4,000 rpm Max. clamping diameter: 65 mm Infinitely programmable three-phase motor: 11 kW Torque: 210 Nm Feed force at 100% duty cycle: 6,000 N Feed travel: 520 mm Ball screw: Ø 32 x 10 mm MACHINE DETAILS Control: TX 8F Operating voltage: 400 V Frequency: 50 Hz Control voltage: 230 V Nominal rated current: 85 A Connection: 54 kW Connected load: 39 kW Noise emission at operator position: 71 dB(A) Hydraulics System pressure: 60 bar Tank capacity: 150 l Coolant lubrication Per tool turret: single-stage centrifugal pump Pump pressure: 5/12 bar Tank capacity without chip conveyor: 300 l Tank capacity with chip conveyor: 280 l Dimensions & Weight Dimensions (L x W x H): 11,000 x 2,000 x 2,600 mm Weight: 6,000 kg Read operating hours: 46,282 h EQUIPMENT STAMAG bar loader Chip conveyor Hainbuch chuck system Two 10-station tool turrets with driven tool stations Counter spindle External reference: L. Schaible

Gamybos metai: 1996, būklė: paruoštas naudoti (naudotas), Turning length: 450 mm, spindle bore: 65 mm, spindle speed: 4000 rpm, main spindle/subspindle power: 18.5 kW / 11 kW, tool stations: 10, live tools: 10, hydraulic capacity: 150 l, hydraulic pressure: 60 bar, total connected load: 39 kW. Rapid traverse X1/X2: 15 m/min, feed force: 5000 N, feed travel: 140 mm. Rapid traverse Z1/Z2: 30 m/min, feed force: 8000 N, feed travel: 450 mm. Rapid traverse Y1: 6 m/min, feed force: 8000 N, feed travel: +/-35 mm. Machine dimensions X/Y/Z: approx. 4150 mm / 2000 mm / 1800 mm, weight: approx. 4750 kg, control: Traub System TX 8F, operating hours: 78,825 h. Documentation available. An on-site inspection is possible. Njdpfxov Scrho Aqxswg

Būklė: naudotas, Gamybos metai: 1974, Wheel diameter - max. 400 mm Wheel width 75 mm Total power requirement 25 kW Machine weight approx. 7 t LORENZ High-Performance Gear Shaping Machine Model LS 400 Year of manufacture 1975 S/N 12592 _____ Max. external gear diameter 400 mm * (possibly larger) Max. internal gear diameter approx. 350 mm Max. gear width 75 mm Module range 0.5 - 6 Stroke length 82 mm Stroke position adjustment 0 - 100 mm Distance from shaping spindle to machine body 205 mm Spindle taper approx. MK 5 Strokes per minute roughing/finishing 118 - 1,000 /min. Table size 400 mm Table bore 125 mm Installation height between table and shaping head min./max. 190/290 mm Fixed distance shaping spindle 250 mm Table axial travel approx. 295 mm Number of teeth approx. 12 - 150 Feed range Tooth depth 0.01 - 0.063 mm /stroke -"- Radial feed at tool-Ø 125 0.125 - 3.150 mm /stroke Spindle / total drive approx. 19 kW / 25 kW - 380 V - 50 Hz Weight 7,000 kg Accessories / Special equipment: • Hydrostatically guided slideway with separate hydraulic unit • Built-in intermediate plate 100 mm to increase shaping head height • Hydraulic workpiece clamping system, brand RINGSPANN, integrated in the table for flat components and internal clamping, various clamping chucks for different workpiece diameters • Infinitely variable stroke speed adjustment for roughing and finishing (SIMOREG DC-Master) • Automatic stroke speed change and automatic feed change for roughing and finishing in up to 3 cuts • Automatic and motor-driven stroke position locking at top dead center after finishing • Separate control cabinet • Integrated coolant system with chip conveyor and magnetic separator Nwsdet Hww Dopfx Aqxeg • Approx. 20 change gears Condition: Satisfactory to good, shortly demonstration-ready Delivery: Ex stock – as inspected Payment: Net – upon receipt of invoice

Gamybos metai: 2015, būklė: paruoštas naudoti (naudotas), A Traub CNC twin-spindle lathe, completely overhauled in 2025, is available. Turning length: 450 mm, spindle bore: 65 mm, spindle speed: 4000 rpm, main spindle/sub spindle power: 18.5 kW/11 kW, tool stations: 10, driven tools: 10, hydraulic capacity: 150 l, hydraulic pressure: 60 bar, connected load: 39 kW. Rapid traverse X1/X2: 15 m/min, feed force: 5000 N, feed travel: 140 mm. Rapid traverse Z1/Z2: 30 m/min, feed force: 8000 N, feed travel: 450 mm. Rapid traverse Y1: 6 m/min, feed force: 8000 N, feed travel: +/-35 mm. Machine dimensions X/Y/Z: approx. 4150 mm/2000 mm/1800 mm, weight: approx. 4,750 kg, control: Traub System TX 8F, operating hours: 12,938 h. Includes chip conveyor and LNS Quick Load bar feeder. Documentation is available. On-site inspection possible. Nsdsv Scrbepfx Aqxewg