Pakilimo juostinis transporteris su nuolydžiu ir išlinkiu

Transnorm TS 1100 GF 10540-600-500

Sąlyga: naujas, Gamybos metai: 2025, Device description - The log splitter features an overload valve that diverts oil to the tank, as well as a high-performance, maintenance-free gear pump. - The wood lifting system simplifies positioning of heavy logs directly beneath the splitting wedge. - Equipped with a 5-pin power connection. - The wedge is angled to facilitate its penetration into the material. RELIABLE 24L HYDRAULIC PUMP! Technical Specifications: - Splitting force: 22 TON - Minimum log diameter: 80 mm - Maximum log diameter: 700 mm - Minimum log length: 350 mm - Maximum log length: 1100 mm - Splitting speed (infinitely adjustable): 10.5 cm/s - Return speed: 7.5 cm/s - Wedge stroke length: 948 mm - Total motor power (S1;S6): S1: 5.1 kW; S6: 6.6 kW - Voltage: 400 V - Hydraulic tank capacity: 24 l Pjdownxcmopfx Afwerd - Hydraulic system pressure: 27.7 MPa - Dimensions: 1050 x 1550 x 2500 mm - Weight approx.: 320 kg

Sąlyga: naudotas, Gamybos metai: 1992, Hydraulic pump, oil pump, gear pump, vane pump, hydraulic power unit - Manufacturer: Brueninghaus, hydraulic pump type OVS 0 28 DFR/30 R-PPA 12 N 00 - Pump: Rated pressure 250 bar - Drive: Behncke QU FA 00L4B-41 Psdji En Dujpfx Afwjrd - Power: 3 kW, 1442 rpm - Dimensions: 620/300/H270 mm - Weight: 50 kg

Sąlyga: naujas, Gamybos metai: 2025, CORMAK HBS275 Band Saw for cutting pipes, profiles, and rods is widely used in all locksmith workshops where precision, quality, and cutting speed are paramount. The model is equipped with a swiveling arm adjustable from 0-60°, with saw guides based on carbide inserts. The robust frame design ensures precise and quiet operation. Machine Features The horizontal metal band saw with a swiveling arm allows cutting perpendicular to the axis of the material as well as at any angle between 0 and 60°. The material can be fed manually or with any mechanical device, while the tool feed is fully automatic. The blade guides are fitted with special carbide plates and bearings, significantly enhancing blade guidance, lifespan, straightness, and the quality of the cut. Carbide guidance greatly reduces both machine and blade wear. The machine is equipped with a high-efficiency coolant pump in a closed-loop system. The saw arm, made of a single cast-iron piece, combined with a 27 mm wide saw blade, allows for repeated series cutting of both profiles and solid materials. The vise is mounted on an adjustable bed and features quick clamping. Blade guides fitted with hard metal (carbide) plates and a rolling bearing system ensure cutting precision and straightness—carbide-guided blade supports are crucial for quality results. Predpfeudi Unox Afwsd The arm is equipped with an automatic blade tension sensor and is tilted at 25 degrees to prolong blade life. A cleaning brush, mounted underneath the arm, ensures blade cleanliness and effective operation. Power is transmitted through a worm gear drive. A cast-iron work table with a swiveling arm and a separate control panel is attached to the base. During cutting, the main movement is the saw blade’s feed, and the arm’s descent serves as the feed direction. The descent (cutting) speed is regulated by a hydraulic cylinder. Feed speed is controlled from the saw’s control panel. The operator can select one of two blade speeds: 37.5 or 75 m/min. In the lower arm position (after finishing the cut), the blade drive shuts off automatically. Safety is ensured by blade guards and micro-switches stopping the motor once the cutting cycle ends or if any guard is opened. Additional protection cuts off the machine automatically if the blade breaks. The drive is transmitted via a worm gear motor. The motor has a thermal fuse, protecting it from overheating during operation. Technical Data TOTAL POWER: 1.5 kW POWER SUPPLY: 400V 50Hz ARM DESCENT CONTROL: hydraulic cylinder BLADE DIMENSIONS: 2450 x 27 x 0.9 mm BLADE SPEED: 37.5 / 75 m/min VISE BASE HEIGHT: 900 mm MACHINE DIMENSIONS (WITH RAISED ARM) (L x W x H): 1720 x 800 x 1800 mm WEIGHT: 215 kg CUTTING CAPACITY Angle | Round | Flat | Square ---|---|---|--- 0° | ø220 | 260 x 140 | 200 x 200 45° R | ø160 | 160 x 140 | 160 x 160 60° R | ø100 | 120 x 100 | 100 x 100 Price does not apply to machines purchased in Poland.

Sąlyga: naujas, Clutches and Brakes for Russian Machine Tools We offer for sale original electromagnetic and mechanical clutches, brakes, and complete clutch assemblies for Russian machine tools, such as: 1M63, 1M65, 1H65, 165, 1512, 1516, 1525, 1L532, RT-117, DIP-300, and many others. Prjdpev Sb Eysfx Afwod We also have spare parts available in our warehouse, including: - Electromagnetic clutches and brakes, clutch discs, and brush holders; - Complete electromagnetic and mechanical clutches for 1M63, 16K20, clutch shafts, friction plates, and discs; - Parts, clutches, and brakes for milling machines 6P82T, 6P83, etc.; - Pneumatic clutches for presses of the KD2128, KD2328 series, etc., manufactured in Russia. Most of the above items are available from stock; for the remainder, we offer the fastest possible delivery times.

Sąlyga: geras (naudotas), Laser, barcode scanner, position scanner -Type: CLV620-3300 -Quantity: 4 barcode scanners available Podeb S Hthjpfx Afwsrd -Price: per unit -Weight: 0.3 kg