Pneumatinis presas

Tox Pressotechnik MAG 008

Sąlyga: naudotas, Gamybos metai: 2016, Stulpelinė presas Tox 4 Mag 008.288 A.001, 2016 m. Presavimo jėga: 80 kN Bendras eiga: 180 mm Nwjdpew D R I Tefx Af Nob Darbinė eiga: 12 mm Staklių svoris: 760 kg

Sąlyga: naudotas, Gamybos metai: 2015, mašinos/transporto priemonės numeris: A2536805, Pressure: 40 t Stroke: 250 mm Return force: 6.3 t Motor: 5.5 kW Nwjdpfx Ajfxyhfof Nob Max. working height: 450 mm Max. forward speed: 90 mm/sec Pressing speed: 10 mm/sec Travel distance - w: 250 mm Ram plate: 500 x 200 mm Table plate: 600 x 650 mm with T-slots Table opening: 200 x 170 mm Table height: 850 mm Oil tank: 200 l The described machine can be custom built for you. Production time is approximately 5 months from receipt of payment. Forward stroke: The press moves to the zero position at up to 90 mm/sec. Positioning accuracy is 0.5 mm or better. Return stroke: The press returns to the end position at up to 90 mm/sec. Accuracy is also 0.5 mm or better. Holding time can be set from 0 to 10 seconds (in 0.1 second increments). Pressing force is adjustable from 10 to 40 tons in bar. Additional control details: The control unit can be locked via a key switch. The key switch provides the following functions: Manual operation with two-hand control at 9.5 mm/sec in setup mode. (Stop in any desired position by releasing the switches.) Manual operation for bending tasks at up to 9.5 mm/sec using two-hand operation and automatic return to the top dead center when the two-hand buttons are released. Automatic operation with safe tools at up to 200 mm/sec. This function is equipped with a warning label on the control panel. In automatic mode, the machine is strictly suitable for the use of fully enclosed, safe tools only. This information is prominently displayed on the front of the machine. In manual setup mode, the machine can also be operated with two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. A rotary key switch enables switching between automatic and manual mode. Position adjustment for top dead center (OT) and bottom dead center (UT) and the switching position for speed reduction are performed via sensors adjustable along a chrome-plated rod. The sensor can be finely adjusted via a clamping thread – accuracy +/- 0.5 mm. The press can be equipped with a bending blade and can bend sheet metal via two-hand operation, but it can also punch, notch, and bend in automatic mode with appropriate safety tooling.

Gamybos metai: 2008, Sąlyga: labai geros būklės (naudotas), SMG HZPU 8000-3000/2100-S1 Hydraulische Ziehpresse Marke: SMG Modell: HZPU 8000-3000/2100-S1 Baujahr: 1995 Nsdpen Awd Rsfx Af Nswb Beschreibung: Hydraulische Ziehpresse in H-Rahmen-Bauweise Presskraft: 800 Tonnen Spannfläche: ca. 3.000 x 2.100 mm Einbauhöhe: max. 1.400 mm

Sąlyga: geras (naudotas), Gamybos metai: 1983, FGSH 50 TOS KURIM Milling Machine Year of manufacture: 1983 (Czech Republic). Double-swivel head (new bearings, new gears installed). Beam aligned with optical sight. Specifications: Table size: 630 x 1800 mm. Travels: X - 1430 mm, Y - 670 mm, Z - 500 mm. ISO 50. Spindle speed range: 45–1400 rpm. Main motor power: 15 kW. Nwjdpjdqp Euefx Af Njb Power requirement: 23 kW. Dimensions: Length x Width x Height: 3200 x 2475 x 2620 mm. Weight: 6500 kg.

Sąlyga: naudotas, Gamybos metai: 1980, Pressing force: 160 t Bending length: 2500 mm Distance between uprights: 2000 mm Throat depth: 315 mm Stroke: 190 mm Table size: 2500 x 400 mm Return speed: 100 mm/sec Nsdpslki Hqefx Af Newb Approach speed: 100 mm/sec Descent speed: 50 mm/sec Working speed: 6 mm/sec Table height above floor: 850 mm Ram surface: 2500 x 400 mm Groove spacing: 500 mm T-slots: 6 x 18 mm Drive power: 18.5 kW Oil capacity: 500 l Total power requirement: 22 kW Machine weight approx. 10 t Space requirement approx. 3.20 x 2.40 x 2.60 m The machine was completely refitted and recommissioned in 1993 according to accident prevention regulations (UVV).

Gamybos metai: 2016, Sąlyga: paruoštas naudoti (naudotas), Max. pressing force: 80 kN, stroke: 180 mm, force stroke: 12 mm, weight: 760 kg. Nsdpfx Aoifptyjf Njwb

Sąlyga: naudotas, Gamybos metai: 2015, TIPAS: L13 / S0540C0311 Pagaminimo metai: 2015 Lazerio veikimo laikas: 33 112 val. Spindulio veikimo laikas: 8 166 val. Galia: 5 000 W Eiga X: 4 000 mm Eiga Y: 2 000 mm Eiga Z: 750 mm Eiga B: ±135° Eiga C: n*360° Ekranas: TFT 12'' Sąsaja: SINUMERIK 840D Nwedpfoxd Uawjx Af Njb

Sąlyga: naujas, - Capacity 1270 x 1.5 mm - Conical rolling - Removable upper roller Nwsdpfx Aoh Ralqof Nob - Foot control - Emergency stop - Documentation - 400V

Gamybos metai: 1986, Sąlyga: beveik kaip naujas (naudotas), Naudojama PJ Hare Ltd C tipo hidraulinė presas pardavimui: Parduodamas Pj Hare Limited hidraulinis presas PRESO MODELIS: 25HP Bendras aukštis (mm): 2425 Bendras plotis (mm): 1120 Bendras gylis (mm): 1470 Svoris (kg): 2000 Tvirtinimo skylės diametras (mm): 18 Tvirtinimo skylių centrai (mm x mm): 610 x 1108 Tvirtinimo platformos dydis (mm x mm): 120 x 250 Alyvos talpa (l): 50 Oro tiekimo slėgis max (bar): 6 Oro tiekimo slėgis min (bar): 4 Pagrindinio variklio galia (kW): 7,5 Variklio saugiklio srovė (A): 20 Visas komplektas su amortizatoriumi Elektros tiekimo duomenys: Minimalus saugiklio srovė (A): 35 Minimalus laidininko skerspjūvis (mm²): 2,5 2 puslapis: MODELIS 25HP: Galia (t): 25 Galia (kN): 250 Stūmoklio jėga (t): 3,1 Stūmoklio eigos greitis (mm/s): 425 Stūmoklio presavimo greitis (mm/s): 35,1 Stūmoklio grįžimo greitis (mm/s): 289 Variklio galia (kW): 7,5 Apytikslis svoris (kg): 2000 Maksimalus eiga (mm): 150 Apsauga - angos plotis (mm): 680 Apsauga - angos aukštis (mm): 300 Minimalus uždarymo aukštis (mm): 200 Maksimalus tarpas (mm): 450 Uždarymo aukščio reguliavimas (mm): 100 Rėmo gylis (mm): 250 Darbo stalo aukštis (mm): 900 Darbo stalo plotis (mm): 650 Darbo stalo gylis (mm): 480 Nuo priekio iki ašies (mm): 250 Praėjimo skylė (mm): 150 Praėjimas po stalu (mm): 350 / 250 T-formos griovelio duomenys (mm): 18, 15, 34, 33 Stalo storis (mm): 95 Šoninės angos plotis (–) Vertikalios angos plotis (mm): 255 Angos rėme plotis (mm): 250 Angos rėme aukštis (mm): 250 Nwodpfshcfyusx Af Njb Viršutinės plokštės plotis (mm): 420 Viršutinės plokštės gylis (mm): 220 Viršutinės plokštės tvirtinimo skylės (mm): 370, 170, 13 Įrankio laikiklio diametras (mm): 40 Įrankio laikiklio ilgis (mm): 65 Tvirtinimo skylės diametras (mm): 18 Bendras gylis (mm): 1400 Bendras plotis (mm): 900 Bendras aukštis (mm): 2450 Tvirtinimo skylių centrai (mm): 1110 Hare presai pardavimui Nauji C ir H tipo hidrauliniai presai pardavimui

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 1979, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 2386, įrengimo aukštis: 280 mm, spaudimo jėga: 25 t, stalo plotis: 440 mm, stalo ilgis: 320 mm, eigos ilgis: 100 mm, Hydraulically overhauled SCHOEN double-column press TES 25 Year of manufacture: 1979/2025 Press force: 250 kN Installation height: 280 mm Stroke: 100 mm Table width: 440 mm Nwedpfx Aevw Spmef Nsb Table depth: 320 mm The machine is being completely overhauled - new control system - new light barriers - hydraulic system reconditioned