Konvencinė frezavimo staklės

tos fnk 25a

Gamybos metai: 1986, Sąlyga: labai geros būklės (naudotas), mašinos/transporto priemonės numeris: 12024, Table clamping surface: 290 x 1250 mm Bsdpfx Abof Tc R Uefjcu Table travel x-axis: 800 mm Table travel y-axis: 360 mm Table travel z-axis: 450 mm Milling head swivels: 90/45° Spindle taper: ISA 40 Spindle speeds: 56 - 4500 rpm Quill stroke: 125 mm Quill feeds: 0.035; 0.14; 0.7 mm/min Spindle drive: 1.8/2.4 kW Required space: 2000 x 1900 x 2300 mm Weight: 1700 kg

Sąlyga: geras (naudotas), šlifavimo skersmuo: 1 600 mm, šlifavimo ilgis: 6 000 mm, Manufacturer: CINCINNATI Model: 60 x 216 Year of manufacture: 1970 Convex and concave grinding 6 steady rests included 2 hydrostatic steady rests Coolant system with magnetic filter Measuring system with 5-arm caliper: Arm 1: Working range 1300 to 1600 mm Arm 2: Working range 1000 to 1300 mm Arm 3: Working range 700 to 1000 mm Arm 4: Working range 400 to 700 mm Specifications Metric US Standard Centre height: 787 mm Grinding diameter Ø: 1574 mm Grinding length: 5800 mm Grinding wheel size: 914 x 101.6 x 304.50 mm Bcjdpfx Asvvvw Eebfsu Wheel speed: 1800 rpm Dimensions (approx.): Length: 15,100 mm Width: 5,500 mm Height: 3,550 mm Weight: 120,000 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but its accuracy cannot be guaranteed. Accordingly, no representation or contractual terms are implied. We recommend you verify all key details.

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, tekėjimo skersmuo: 655 mm, tekinimo skersmuo virš slankiojančio stalo: 655 mm, tekėjimo ilgis: 5 000 mm, Pasukimo skersmuo virš staklių lovos 655 mm Pasukimo skersmuo virš atramos 390 mm Tekinimo ilgis 5000 mm Veleno anga 82 mm Veleno apsisukimų dažnis 9-1120 aps./min. Bsdew N D T Sepfx Abfecu Pado greitis 0,049-3 mm/aps. Bendra galia 12 kW

Sąlyga: geras (naudotas), Gamybos metai: 1963, Vertical Turning Lathe Manufacturer: JUNGENTHAL, Type: DK 1400, Year: 1963, equipped with 1-axis digital readout. Maximum turning diameter: 1400 mm Faceplate: 1250 mm automatic turret head Spindle speeds: 3.5-180 rpm Feeds: 0.063 - 3.15 mm/rev Rapid traverse: 1800 mm/min For additional specifications, please refer to the data sheet. Machine documentation available. Bodpfx Aevi Hryebfscu Dimensions: Length 4 m, Width 2.4 m, Height 3 m, Weight 16 t In good overall condition.

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1992, Funkcionalumas: visiškai funkcionalus, centro aukštis: 150 mm, šlifavimo ilgis: 620 mm, plotis centre: 680 mm, šlifavimo disko skersmuo: 350 mm, bendras plotis: 500 mm, Condition of the machine: The machine is currently in a used, non-refurbished condition. The following work will be carried out on the machine: - Complete disassembly of the entire machine down to the guideways Bcederz Nflopfx Abfeu - Replacement of all seals and wear parts throughout the machine - Replacement of the X-axis feed screw - Replacement of the main bearings in the workpiece spindle - Replacement of the grinding spindle - All assemblies of the machine will be restored to an as-new condition Geometry: - Scraping the X-axis guideway - Scraping the Z-axis guideway - Grinding the X-axis table - Grinding the Z-axis table - Grinding of the upper tables - Grinding of the assembly housings (workpiece spindle head, grinding spindle head, and tailstock) - Preparation of a measurement protocol for the TSCHUDIN cylindrical grinding machine Painting: The main assemblies will be newly painted; the remaining parts of the machine will retain the original paintwork Electronics: The entire machine's electronics will be checked and tested; defective switches and cables will be replaced

Gamybos metai: 1993, Sąlyga: geras (naudotas), mašinos/transporto priemonės numeris: 03.2370, Manufacturer: Arthur Klink Model: RISZ 10 x 1000 x 400 Year of manufacture: 1993 Weight: 6,500 kg (total) Machine No.: 03.2370 General / Technical Data: Used vertical hydraulic internal broaching machine with automatic workpiece feeder for 2 workpieces, in good condition Tensile force: 10,000 kg Broaching length: 1,000 mm Broaching stations: 3 units Distance between broaching stations: 125 mm Chuck diameter for pull heads: 3 x Ø 80 mm Bcsdpfx Ajcc D Ddjbfeu Clear width between cylinders: max. 435 mm Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 10.9 m/min Return speed: hydraulically infinitely variable from 5 up to max. 27.5 m/min Machine footprint (W x D x H): approx. 5,500 x 2,800 x 4,900 mm Power supply / connected load: 380 Volt 50 Hz / 38 kW Accessories / Special Features: The machine is equipped with a workpiece table and a pull bridge for 3 stations. Furthermore, the machine features an automatic workpiece feeding system for 2 workpieces. The locking of the shank and end-piece holders is hydraulic. The machine comes with a coolant system with an integrated magnetic conveyor for chip removal, allowing operation without the need for a special foundation (pit). Remarks: The machine is designed for use in large-scale production. It is in very good condition and still retains its original paintwork. The machine is under power and can be inspected at our warehouse.

Sąlyga: naudotas, Gamybos metai: 1986, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: C3300, šlifavimo ilgis: 4 500 mm, šlifavimo plotis: 300 mm, stalo ilgis: 4 500 mm, stalo plotis: 300 mm, reikalingas aukštis: 2 500 mm, vietos reikalavimas ilgis: 13 700 mm, reikalingas plotis: 2 500 mm, Reform AR45 T9 ZU C3300/86 Year of manufacture: 1986 Grinding length: 4,500 mm Grinding width: 300 mm Workpiece height: 250 mm Bjdpfx Abjtqtn Dofjcu Table or grinding arm swiveling range: ±90 degrees Segment head diameter: 560 mm Spindle diameter in front bearing: 120 mm Swivable: 2° Max. torque: 719.5 Nm Motor: B280, 55 kW Grinding spindle speed range: 0–730 rpm Control: BBC Baumüller drives Marposs measuring system Hydraulic clamping Grinding mist extraction: Hydrocyclone cleaning system Additional grinding unit ZU Feed rate: 2,000–35,000 mm/min Space requirement approx. 13.7 x 2.5 x 2.5 m

Sąlyga: naujas, Gamybos metai: 2025, Completely overhauled, as-new machine, upgraded to the legally required safety standard 'state of the art' in accordance with the occupational health and safety regulations. Control Cabinet Electronics Installation of a new CE-compliant control cabinet in accordance with the latest legal requirements specified by the German Social Accident Insurance (Berufsgenossenschaften): BGVA 3 / DIN-EN 60204-1—new machine standard. Bodpfxoh Sptnj Abfjcu Optionally, the complete machine can be supplied in CE configuration. A CE Declaration of Conformity will be issued for the machine. Thus, FPS Werkzeugmaschinen GmbH takes on the role of manufacturer. The machine thereby meets the requirements of the Occupational Safety Ordinance (BetrSichV). Consequently, the year of manufacture corresponds to the actual delivery date of the machine. Relevant standards: EN ISO 12100, EN ISO 13857, DIN EN 13128:2009-09, EN ISO 13850, EN ISO 13849, EN 60204-1 Control System 3-axis FPS Aktiv digital display Spindle Speed 25–2500 rpm, direct-drive transmission with 18 geometrically graded speed levels for maximum torque / milling performance Feed Rate 5 to 500 mm/min, steplessly adjustable Rapid Traverse 1.2 m/min Quill Extendable quill, vertical stroke 100 mm, SK40 with M16 drawbolt thread Optionally: with DECKEL saw thread S20 x 2 Extendable quill, horizontal stroke approx. 100 mm Axes X/Y/Z: 800/300/400 mm Table Fixed angle table 1000 x 440 mm, load capacity 2000 kg Equipment • Vertical and horizontal spindle • Milling head manually swivels +/- 90° Options • Z-axis bellows • Chip tray • Machine lamp • Central lubrication system • Universal table • Rotary table • Slotting head • Dividing attachment • Steady rest • etc.

Sąlyga: naudotas, Gamybos metai: 1992, Technical details: Spindle diameter: 100 mm X travel: 1,500 mm Y travel: 1,450 mm Z axis: 930 mm W axis: 506 mm B axis (table): 360° CNC control: Heidenhain TNC 407 Tool holder: SK50 Spindle speed: 5 – 1,600 rpm / stepless Table load capacity: 4.0 t Table size: 1,100 x 1,400 mm Table rotation: 360° Feed rates X/Y/W/Z axis: 2 – 2,000 mm/min Rapid traverse X/Y/W/Z axis: 5,000 mm/min Total power requirement: 40 kW Electrical cabinet dimensions: 2,000 x 600 x 2,000 mm Bedpfju Idqbex Abfjcu Machine dimensions (LxWxH): 4.9 x 3.7 x 3.8 m Machine weight approx.: 14 t CNC boring and milling machine with hydraulic unit Equipment: Measuring probe electronic handwheel hydraulic weight compensation on Y axis universal milling head A wide range of accessories included – please inquire! In good condition.

Sąlyga: geras (naudotas), Gamybos metai: 1992, Favretto MB 130 – Technische Daten Maschinentyp: tangentiale (horizontale) Flachschleifmaschine Baujahr: 1992 Tischgröße: 1700 × 400 mm Bcedpst Rwvzefx Abfju Magnetspannplatte: ca. 1300 × 400 mm Magnetplattenhöhe: 40 mm Längsverfahrweg (X-Achse): 1380 mm Querweg (Y-Achse): 450 mm Vertikalweg (Z-Achse): 550 mm Abstand zwischen Spindelmitte und Tischoberfläche: 203 mm (min) bis 753 mm (max) Schleifscheibenabmessungen: 400 mm Durchmesser × 152 mm Breite × 100 mm Bohrung Spindeldrehzahl: ca. 1400 U/min Längsvorschub: 2000 bis 40000 mm/min Quer-Vorschub: 50 bis 3000 mm/min Vertikal-Vorschub: 700 mm/min Antriebsleistung Schleifkopf: ca. 15 kW Gesamtanschlusswert: ca. 25 kW Maximale Tischbelastung ohne Magnetspannplatte: ca. 1500 kg Maximale Tischbelastung mit Magnetspannplatte: ca. 1205 kg Maximale Schleifkapazität (L × B × H): ca. 1500 × 600 × 550 mm Maschinengewicht: ca. 7100 kg