Frezavimo staklės su judančiu stulpu

TOS KUŘIM FREP-D 20X40A

GENERAL MACHINE CHARACTERISTICS

The machine is characterized by a fixed gantry and a movable table. The gantry is fitted with a height-adjustable crossbeam, which can be equipped with one or two vertical spindle heads in the VFS 160 configuration. Additionally, the gantry can accommodate one or two side-mounted (horizontal) spindle heads VFS 160.

The aforementioned types of spindle heads can be fitted with up to four additional spindle attachments.

The clamping area consists of two interconnected clamping tables, which can also be used individually when disconnected (only one table operational at a time).

Clamping Table

Dimensions of one table: ..... 2,000 x 4,000 mm
Total length of interconnected tables: ..... 9,000 mm
Clamping surface of joined tables: ..... 8,500 mm
Clamping T-slots (width x pitch x number): ..... 36 mm x 180 mm x 11 slots
Table working height from base: ..... 1,000 mm
Load capacity per 1 m of table length: ..... 5,000 kg
Table travel: ..... 4,250 mm (9,000 mm for joined tables)
Working feed rate of table: ..... 15 – 3,000 mm/min
Ppedpfx Adoxpudtozot
Rapid traverse: ..... 9,000 mm/min

Gantry with Height-Adjustable Crossbeam

Clear opening between uprights: ..... 2,750 mm
Crossbeam vertical adjustment: ..... 2,295 mm
Crossbeam travel: ..... 750 mm/min

Vertical Spindle Head VFS 160

Spindle taper: ..... ISO 60
Spindle drive power: ..... 50 kW
Speed range: ..... 15 – 710 rpm
Working feed: ..... 10 – 2,000 mm/min
Rapid traverse: ..... 2,000 mm/min
Distance from spindle face to clamping table: ..... 425 – 2,720 mm

Horizontal Spindle Head VFS 160

Spindle taper: ..... ISO 60
Spindle drive power: ..... 50 kW
Speed range: ..... 15 – 710 rpm
Working feed: ..... 5 – 1,000 mm/min
Rapid traverse: ..... 1,000 mm/min
Distance from spindle face to center T-slot of table: 377 – 1,177 mm

Overall machine dimensions (L x W x H):
20,720 mm x 8,500 mm x 7,150 mm

Additional Spindle Heads:

NVS Head (Extension Attachment)

Spindle taper: ..... ISO 60
Speed: ..... 15 – 710 rpm
Max. transmitted power from 60 rpm: ..... 40 kW
Max. torque: ..... 6,500 Nm

HFUS Head (Universal Milling Head)

Spindle taper: ..... ISO 60
Speed: ..... 15 – 710 rpm
Max. transmitted power from 80 rpm: ..... 22 kW
Max. torque: ..... 2,700 Nm
Swiveling capability, vertical axis: ..... 360°
Swiveling capability, horizontal axis: ..... 360°
Quill adjustment: ..... 50 mm

HFOS Head (Double-sided – Right Angle Milling Head)

Spindle taper: ..... ISO 60
Speed: ..... 15 – 710 rpm
Max. transmitted power from 60 rpm: ..... 40 kW
Max. torque: ..... 6,500 Nm
Swiveling capability ...

Skelbimas buvo automatiškai išverstas. Galimos vertimo klaidos.