Rotary valve

Torex 8-flügelig Ø 265 mm

Gamybos metai: 2026, būklė: naujas, The AL-KO Sanding Table AST 1.5 BASIC is the entry-level model in the AL-KO sanding table product range. It is certified according to GS-HO-11 and bears the “Wood Dust Tested in Accordance with BGI 739-1” seal. This makes it suitable for hand sanding tasks as well as for processing workpieces using handheld machines. The sanding table is made of galvanized sheet steel. The extraction tray is aerodynamically optimized. Thanks to its funnel-shaped design with an integrated air duct, the airflow is precisely guided towards the extraction port. Depending on the required extraction performance, the unit can be connected to the on-site extraction system via a Ø 140 mm or Ø 160 mm connection port. The folded edges along both sides of the work surface allow for face-end working on workpieces. The extraction grates are aerodynamically aligned with the extraction port to ensure optimal extraction results. For cleaning inside the sanding table, the slatted grid can be removed and the air duct can be detached by loosening just a few screws. The sanding table is delivered pre-assembled; only the legs need to be installed and adjusted to the required working height. Your advantages: • Accessible from all four sides • Loadable up to 150 kg • Manual, tool-free height adjustment with scale • Offset side edges for edge sanding Credpfx Apefyadbsaoi • Workpiece-friendly beech slatted grid (removable) • Funnel-shaped air guidance to the extraction port Technical data: • Extraction port: 140/160 mm • Required extraction capacity: 1,500 m³/h • Negative pressure at port at 22 m/s: 1,000 Pa at Ø 140 mm / 700 Pa at Ø 160 mm • Adjustable working height: from 735 to 1,015 mm • Working surface (W x L): 946 x 1,500 mm • Dimensions (W x L): 1,000 x 1,600 mm • Weight: approx. 73 kg

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: HAW07.5-2-22-T96, bendras svoris: 100 kg, bendras ilgis: 600 mm, bendras plotis: 400 mm, bendras aukštis: 900 mm, įėjimo įtampa: 400 V, įvesties srovės tipas: Oro kondicionierius, įėjimo dažnis: 50 Hz, galia: 7,5 kW (10,20 AG), darbinis slėgis: 250 juosta, Įranga: hidraulika, Hydraulic power units from 1.1 to 22 kW output ⦁ Drive type: electric motor, petrol engine, diesel engine, or PTO-driven ⦁ Hydraulic oil tank capacities: 36L, 96L, 144L, 250L, or customized as per customer specifications ⦁ Hydraulic pump: gear pumps or axial piston pumps ⦁ Additional components such as valves and control technology Cedpfst U Uiasx Apaori ⦁ Tank sizes: 36L, 96L, 144L, 250L, or tailored to customer requirements (customer drawing)

Būklė: naujas, Naujas įrenginys MASS International Kampinis transporterio konvejeris / juostinis konvejeris L formos konvejeris su fiksuotu 35° kampu Greitas pristatymas MASS International Kampinis konvejeris NC1 Fiksuoto kampo konvejeris su surinkimo plokštelėmis įkrovimo dalyje Pavyzdys kaip parodyta: NC 1 Įkrovimo dalis – 600 mm Kylanti dalis – 1300 mm Naudingoji juostos plotis – 250 mm Išorinis plotis – 305 mm (be variklio) Aukštis reguliuojamas, išleidimo aukštis 750–1050 mm Fiksuotas kampas tarp įkrovimo ir kylamosios dalies Nuolydis reguliuojamas Sklendžių aukštis – 30 mm Sklendžių atstumas – 500 mm Juostos greitis – 3 m/min Judantis su pasukamais stabdomais ratukais Papildomai: dar daugiau matmenų žr. standartiniame tiekimo sąraše matmenys pagal kliento pageidavimą FDA atitinkanti juosta Codpohm Axgefx Apaori pakeistas juostos greitis ir kt.

Gamybos metai: 2023, būklė: naujas, Due to overproduction, 9 units available Dimensions: approx. 3000 x 300 x 105 mm Aluminum construction: Conveyor belt width without wavy edge PVC conveyor belt, smooth Belt color: green, 2-ply, highly cross-stable, endless welded with stepped joint Cedeff Hgaepfx Apajri * Antistatic due to threads in the running side fabric Drive: Motor approx. 0.18 kW, speed 0.3 m/sec. * Speed adjustable via frequency converter Connection: 220/400V, 50Hz, protection class IP54 Drive and motor control optional

Būklė: naujas, Gamybos metai: 2025, Fully automatic case erector for an efficient and cost-effective packaging process. The cartons are automatically picked from the magazine, erected, and sealed from the bottom (single direction). The erected cartons are then conveyed on a transport belt and collected for filling. Specifications: SIEMENS PLC, SIEMENS touchscreen; Carton size in mm: L(350-650)xW(150-500)xH(100-500); max. machine cycle rate (idle): 9 cycles/minute; Power: 110/220V, 0.3kW; Compressed air: 5-6bar, 0.4m³/min; Tape width in mm: 48/60/75; Machine dimensions: L2200xW1900xH1450mm; Weight: 530kg. Crodpfx Ajv Nkvijpasi Please note that our prices for new machines are often below the typical used equipment prices. Feel free to send us your inquiry and let us know your packaging requirements. – We typically have 30-50 different new machines available from stock at any given time. For custom-made machines, we offer very short delivery times starting from approx. 3 weeks. – All machines are available with a full warranty.

Gamybos metai: 2016, būklė: visiškai atnaujintas (naudotas), A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Exclusive use of original components Original manufacturer’s warranty Guaranteed spare parts supply by the manufacturer Reduced delivery time Prior to delivery, the machine is inspected, all wear parts are checked and replaced if necessary, and the machine is customized to your specific requirements Crjdpoiuxv Nefx Apasi Possibility to supply all required peripherals or adapt to your existing production plant We are also interested in the repurchase of your unused HOSOKAWA ALPINE equipment Hosokawa Alpine Ventoplex C32V Air Classifier, minimally used, in very good condition. Perfect recirculating classifier for the fine classification of abrasive products. Especially suitable for high capacities and throughput rates with low energy consumption. Our air classifier allows separation of a product into two different fractions – one fine and one coarse – when a normal screen is unable to achieve this due to product fineness or other material characteristics. This is useful when you need to dedust a product by removing undesirable ultrafine dust, or to ensure a precise top cut by separating oversized coarse material, enabling you to tailor your product to the exact required particle size distribution specification. This equipment is specially designed for the processing of abrasive materials, such as those found in the minerals industry. Construction material: mild steel, with wear protection Not explosion-proof design (NPSR), without ATEX classification Scope of supply: Hosokawa Alpine Ventoplex C32V air classifier with 15 kW motor and frequency converter for the classifier wheel, 37 kW motor and frequency converter for the internal fan, 5.5 kW internal dosing screw with frequency converter, external cooling blower with 3 kW motor.

Gamybos metai: 2026, būklė: naujas, Funkcionalumas: visiškai funkcionalus, galia: 1 500 kW (2 039,43 AG), bendras svoris: 1 800 kg, stalo ilgis: 2 500 mm, stalo plotis: 1 300 mm, Įranga: CE žymėjimas, dokumentacija / vadovas, This laser cutting machine is capable of processing sheet metal with a thickness of 3–4 mm. The Wattsan 1325 can cut stainless steel, carbon steel, galvanized steel, copper, aluminum, and titanium. The working area measures 1300 x 2500 mm. The precision Wattsan 1325 E is equipped with feed rollers that facilitate material loading. The E-series laser metal cutter has a maximum traverse speed of 80 meters per minute. The laser output can reach up to 1.5 kW. The machine bed is made of steel. For further information, feel free to contact our sales team! Wattsan 1325 E Specifications: • Working area: 1300 x 2500 mm • Laser output: up to 1500 W • Weight: 1620 kg Virmer offers not only premium machinery, but also comprehensive service and delivery. Our engineers and sales representatives are ready to answer all your questions and provide video support if needed. Additionally, owners of Wattsan equipment benefit from lifetime online support. Virmer is based in the Netherlands and operates throughout Europe. Virmer is the official distributor for Wattsan. We supply not only laser engravers but also metal cutting machines, welding units, marking systems, and cleaning machines. Wattsan is a Chinese manufacturer that has been producing laser equipment for nearly 15 years and continues to improve based on customer feedback. Thanks to these inputs, Wattsan has implemented over 50 upgrades, making the machines more reliable, precise, and powerful—so you can take your business to the next level. Crjdpfx Aeiicw Eopaoi YOU CAN CALL OR WRITE TO US! WE'LL HELP YOU FIND THE RIGHT MACHINE FOR YOUR APPLICATION. If you are looking for an ideal laser or CNC milling machine, we are happy to assist. We offer a wide selection of laser systems and accessories: CO2 laser machines; metal laser cutting machines; laser metal cutters; fiber metal lasers; fiber laser engraving machines for metals; CNC metal milling machines; woodworking milling machines; CNC milling machines; laser engraving machines; laser engravers; laser cutters for plywood; laser engravers; laser metal cutting machines; CNC milling machines; laser markers; lenses; chillers; machine cooling systems; S&A chillers; IPG Laser, MAX Photonics, Raycus; compressors; rotary devices; and mirrors for laser systems.

Būklė: naudotas, Gamybos metai: 2009, šildymo galia: 400 kW (543,85 AG), Siūlome garsios įmonės Kohlbach biomasės katilą. Biomasės katilas 400 kW, TIPAS K 8 – 400. Katilas skirtas žievei, skiedroms ir pjuvenoms. Pilnas siurblių ir vožtuvų komplektas. Daugiaciklonis, kuro padavimas, šilumokaitis iš 2009 metų. Papildomai už papildomą mokestį galimas biomasės katilas su judančiomis grindimis ir hidrauline pompa. Crsdpfjx Daw Uex Apaoi

Gamybos metai: 2022, būklė: beveik kaip naujas (parodų įrenginys), AL-KO Grinding Table AST 1.5 BASIC The AL-KO Grinding Table AST 1.5 BASIC is the entry-level model in the AL-KO grinding table range. It is certified according to GS-HO-11 and bears the seal “Wood Dust Tested according to BGI 739-1”. Crsdpfx Asdqzhbjpaoi YOUR BENEFITS - Accessible from 4 sides - Load capacity up to 150 kg - Manual, tool-free height adjustment with scale - Offset longitudinal sides for edge sanding - Workpiece-friendly beech wood grate (removable) - Funnel-shaped airflow to extraction nozzle TECHNICAL DATA AST 1.5 BASIC Extraction nozzle: 140 / 160 mm Required extraction capacity: 1,500 m³/h Negative pressure at nozzle at 22 m/s: - 1,000 Pa at DN140 mm - 700 Pa at DN160 mm Adjustable working height: 735-1,015 mm Work surface (W x L): 946 x 1,500 mm Dimensions (W x L): 1,000 x 1,600 mm Weight: approx. 73 kg

Būklė: visiškai atnaujintas (naudotas), Ekranas medžio drožlėms IDL000756 - Trys sluoksniai Cjdpotmtf Rofx Apaeri - Gamintojas: Passimo OY - Sijojimo plotas: 15 m² - Po renovacijos.