žemės ūkio mastas

Tong 2510 IN-BAG VEGETABLE WEIGHER & BAGGER

Sąlyga: geras (naudotas), Essentially comprising: Feed hopper (15 cbm) with push cart Kdsdpfxet Uzv Ho Ah Uew Double-deck screening unit with feed chutes and undersize discharge conveyor Various transport and stockpile conveyors Overband magnet Electrical installation with control cabinet

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2023, veikimo valandos: 1 851 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 70 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 400 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 500 kg, bendras svoris: 17 000 kg, alyvos bako talpa: 70 l, Technical data baler: Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: AVOS 1410 BS-22/50 Year of manufacture: 2023 Operating hours pump: 1,851 hours (as of July 2024) Press force: 70 t (equipped with a 70 t hydraulic cylinder, special equipment) Specific press force: 90.9 N/cm² (equipped with a 70 t hydraulic cylinder, special equipment) Feed chute dimensions: 1,400 x 1,000 mm Theoretical cycle time: 13 seconds Theoretical throughput: 266 m³/hour Bale dimensions: 1,100 x 750 mm (W x H), length variable Drive output: 22 kW Total connected load: 65 kW Tying: 4-fold vertical, fully automatic Throughput at a bulk density of: 30 kg/m³ approx. 5.5 t/hour 50 kg/m³ approx. 7.5 t/hour 100 kg/m³ approx. 9.7 t/hour Bale weight at a bale length of approx. 1.2 m: up to 500 kg, depending on material PLC: Siemens S7-1500 Operator panel: Schneider Harmony Press dimensions installed: 8,610 x 2,400 x 3,835 mm (L x W x H) Transport weight baler: 17 t Special equipment: - Wear-resistant floor made of HARDOX steel - Larger main hydraulic cylinder with 70 t pressing force - Special press ram for compacting loose bulk materials of small particle size - OptiCut XS system for reduced cutting forces and increased throughput - Special press plunger for compacting challenging materials Technical data conveyor belt: Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: KGF GB 1500 Year of manufacture: 2023 Drive output: 4.0 kW Belt speed: approx. 0.3 m/second Feed belt length: 2,679 mm Incline belt length: 6,866 mm Gooseneck length: 1,272 mm Incline: 35° Usable width: 1,400 mm Sidewall height incline belt: 800 mm Kdedou Thbxjpfx Ah Ujw Cleat height: 50 mm Cleat spacing: 750 mm Belt specification: EP 400/3, 3:1 (DIN Quality N) Overall height: 4,515 mm Transport dimensions overall: 11,148 x 2,502 mm (L x W) Technical data contactless personnel protection system: Manufacturer: BOREMA Umwelttechnik AG, Switzerland Model: APSS iBOR 22 Year of manufacture: 2023 Condition of the baling plant: Due to the low operating time of only 1,851 pump hours and the exclusive processing of paper, cardboard, and film, the entire plant is in very good condition. Scope of delivery: - Avermann baler, type AVOS 1410 BS-22/50, incl. wire tying stations and bale chute - Avermann conveyor, type KGF GB 1500 - BOREMA personnel protection system, type APSS iBOR 22 Notes: Full documentation (operating manual, CE declaration, electrical/hydraulic wiring diagram) is available. Viewing is possible by appointment. We assume no liability for the technical data or any possible errors.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1988, Automatic wide belt sander with 2 belts for lacquers, wood, veneer, composite materials and various other materials Machine can be integrated into a production line Technical data: Working width: 1350 mm Maximum usable height: 130 mm Belt size: 2450 x 1350 mm Configuration: 1st unit: Sanding drum diameter 320 mm - grit 60 - cleaning belts for blower - 11 kW motor with variator 2nd unit: Sanding drum diameter 320 mm - grit 40 - cleaning belts for blower - 11 kW motor with variator Scotch Brite unit - 1.5 kW motor Vacuum table Belt speed variator: 4–19 m/min Operating pressure: 7 bar Dimensions (machine): 2000 x 2750 x 2200 mm Kdedpfx Ahsgmbu Ie Uew Vacuum pump: 800 x 700 x 900 mm (h)

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1988, Wire diameter: 0.1 – 1.3 mm Cut length: 5 – 70 mm Performance: up to 400 cycles/min Kjdpfx Aho Syv Te Usdw Complete with cooling unit and motorized wire spool

Sąlyga: naudotas, Gamybos metai: 2009, veikimo valandos: 20 536 h, spaudimo jėga: 80 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 400 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 600 kg, tuščias svoris: 16 000 kg, Technical Data Press: Ksdsu Thypspfx Ah Ujdw Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: AVOS 1410-45/80 Year of manufacture: 2009 Operating hours: 20,536 hours (as of September 2024) Pressing force: 80 kN Specific pressing force: 103.9 N/cm² Feed opening dimensions: 1,400 x 1,000 mm Theoretical cycle time: 12 seconds Theoretical throughput: 300 m³/hour Bale dimensions: 1,100 x 750 mm (W x H), length variable Drive power: 45 kW Total connected load: 75 kW Tying: 4-fold vertical, fully automatic Throughput capacity at bulk density of: - 30 kg/m³: approx. 6.0 t/hour - 50 kg/m³: approx. 10.5 t/hour - 100 kg/m³: approx. 17.5 t/hour Bale weights at approx. 1.2 m bale length: up to 600 kg, depending on material PLC control: Siemens S7-300 Display panel: pulsotronic Press dimensions (assembled): 8,610 x 2,400 x 3,835 mm (L x W x H) Press transport weight: 16 t Special equipment: - Wear-resistant floor made of HARDOX steel - Special press ram for compacting "difficult" materials and loose bulk goods of small particle size - Control cabinet air conditioning - Machine base height increase: 200 mm Note: The machine is currently located in our workshop and is being partially overhauled. We anticipate that the overhaul work will be completed by the end of October and the machine will then be tested and released for sale.

Gamybos metai: 1985, Sąlyga: geras (naudotas), COMPLETE PAINTING LINE WITH THE FOLLOWING STATIONS: 1. COATER FOR WATER-BASED PRIMER 2. OVEN WITH UV + IR LAMPS 3. DOUBLE COATER WITH REVERSE SYSTEM 4. UV LAMPS 5. DOUBLE COATER 6. UV LAMPS 7. DMC SANDER 8. CONVEYOR 9. SORBINI TOUCH-UP STAIN COATER 10. IR LAMPS 11. FINISHING ROLLER 12. UV LAMPS 13. OUTFEED CONVEYOR Kodpfx Aok Scufeh Ujdw

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2000, mašinos/transporto priemonės numeris: 403, Equipment / Further information: Unwinding Unit: Roll holder: single Kjdpfxjn D Ew Ij Ah Usdw Max. roll diameter: mm 1000 Unwinding: automatic Thermoforming Machine: Max. tool dimensions: mm 520x330 Max. positive forming height: mm 15 Max. negative forming height: mm 120 Film width: mm 150 / 760 Stroke length: mm 50 / 330 Max. HIPS film thickness: mm 1.8 Lower table stroke: mm 150 Clamping force: kg 7500 Installed power, upper heater: kW 18.8 Installed power, lower heater: kW 14.1 Idle cycle rate: per min. 40 Main drive motor power: kW 2.2 Film feed motor power: kW 0.75 Operating air pressure: kg/cm² 7 Water consumption at 12°: 1t/h approx. 30 Air consumption at 7 kg/cm²: 1t/cycle approx. 125 Installed power: kW 50 9x Tools: Article No. // Tool No. // Cavities // Description / Product: 3599 // 457 // 10 // Vending cup Filling volume / Capacity / Contenance = 223 ml 593 // 460 // 8 // Coffee-to-go / Thermo cup Filling volume / Capacity / Contenance = 300 ml / 12 oz 509 // 452 // 6 // Ice cream cup: full volume = 140 ml / Filling volume with 6 mm headspace: 120 ml 591 // 459 // 10 // Thermo cup ⌀ 81 / 180 ml 740 // - // - // Standard cup with sealing rim ⌀ 75-120 ml 3589 // 458 // 12 // Coffee-to-go / Thermo cup: Filling volume / Capacity / Contenance = 80 ml 595 // 456 // 10 // Vending cup / Gobelet pour automate: Filling volume / Capacity / Contenance = 150 ml 210 // - // - // Baking case / Technical part / Plate or tray 8000 // 455 // - // Granulate cup 180 ml / Technical part with flat sealing rim

Sąlyga: naujas, Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: V101VVNG4003ESGR0ZL180W, We are happy to advise you! Production Orientation: Vertical Conveying System: Product infeed and outfeed optional, depending on product Film Feeding: Rear Forming Shoulder: Fixed Operator Display: Touchscreen with memory function Drives & Controls: 3 servo motors and PLC control system Packaging Length: 50–190 mm Packaging Width: 50–150 mm (depending on film width) Packaging Height: Depending on forming shoulder Speed: 20–60 bags/min. depending on material, packaging size, and product Film Width: 100–320 mm Power Consumption: Approx. 4 kW Power Supply: 220–240 V / 50 Hz / single phase Machine Weight: Approx. 210 kg Machine Dimensions: Approx. 3560 x 1320 x 1500 mm Machine Material: Approx. 1500 x 960 x 1120 mm Machine Construction: 304 stainless steel with sandblasted surface finish External Compressed Air Required: Yes, 6 kg/cm², 85 L/min Printer Mount: Suitable ink wheel printer available as an option for an additional €1,200 Delivery Time: Current delivery time under 10 weeks Features: • Stainless steel design suitable for the food industry • Applications for powders, granules, liquids, paste/dough, and small parts such as screws • Industries: Pet food, cosmetics (soap, shower gel), food (coffee, nuts), metal industry • Easy touchscreen operation via colored icons • Printed mark sensor included • Automatic stop in the event of empty product (no product – no bag) • Bag sealing system for finished stand-up pouches • Safety protective covers • Can be combined with upstream and downstream machines • Customer-specific modifications/constructions upon request Additional options (on request and at extra cost): • Alternative stainless steel construction/painting • Zigzag knives, Euro hole punch, etc. • Automatic stop in the event of empty product (no product – no bag) • Automatic product feeding systems, intermittent feed systems Kdodpfeq Ikg Dox Ah Uew • Perforation units (tear-open thread) for easy opening • Gas flushing units for protective atmosphere (extended product shelf life) • Length-dependent product processing by photocell detection

Gamybos metai: 1996, Sąlyga: paruoštas naudoti (naudotas), A Forel multi-pane insulating glass production line with fixed spacer and Swiggle is available. Glass production options: double/triple glazing, assembly: coated/uncoated, insulating glass unit dimensions X/Y min./max.: 400mm x 200mm / 2500mm x 2000mm, glass thickness range: 12mm-50mm, total line length: 30,200mm. Line components: 1) Infeed to washing machine, 2) Washing machine, 3) Outfeed from washing machine, 4) Infeed for spacer placement, 5) Spacer placement, 6) Outfeed spacer placement, 7) Infeed assembly station, 8) Assembly station, 9) Outfeed assembly station, 10) Infeed to roller press (non-gas-filling press), 11) Outfeed roller press, 12) Tilting roller table for unloading. Documentation available. On-site inspection possible. Kdodpfx Ahougv R Io Uow

Gamybos metai: 2003, Sąlyga: paruoštas naudoti (naudotas), Secador de tambor usado, fabricado por SAFEM, extraído de una línea de productos sin gluten. Fluido: Vapor Presión de diseño: 12 bar Kdedoq Nmuwopfx Ah Uow Presión máxima de trabajo: 9,5 bar Presión de prueba: 24 bar Temperatura máxima de trabajo: 192ºC Volumen: 4,55 m3 Presión x Volumen: 54,6 bar x m3