Sijojimo įrenginys

Enders stationäre Siebanlage

Būklė: geras (naudotas), Gamybos metai: 2000, stalo plotis: 1 000 mm, stalo ilgis: 1 800 mm, stūmoklio plokštės plotis: 600 mm, bendras ilgis: 25 000 mm, bendras plotis: 27 000 mm, bendras aukštis: 47 000 mm, bendras svoris: 43 000 kg, štampo pagalvėlės eiga: 200 mm, Control system Siemens Simatic OP 27 Light barrier by Sick Pgedpfx Ajtiwgijpysk Separate control cabinet by Rittal Side walkways/passages Floor-level installation

Būklė: labai geros būklės (naudotas), Gamybos metai: 2008, Zum Verkauf steht eine komplette Produktionslinie für PVC-Fensterbau der Marke URBAN, bestehend aus: Podpfx Aoucl Dcepyjgk *1. Zwei-Kopf-Schweißmaschine; Marke URBAN, Modell: AKS 5305-FF, Seriennummer: 53372, Baujahr: 2007, voll funktionsfähig; *2. Nutfräsmaschine; Marke URBAN, Modell: WS 103, Seriennummer: 790, Baujahr: 2007, voll funktionsfähig; *3. Doppelgehrungssäge: Marke RAPID, Modell DGS 100, Seriennummer: 004606128, Baujahr: 2010, wird mit Absauggerät mit Filtersäcken verkauft, voll funktionsfähig; *4. MACC Stahltrennsäge, Modell NEW 275, Seriennummer: 88266, Baujahr: 2008, voll funktionsfähig; *5. Pantograph der Marke URBAN, Modell MLA A23 – 100466321S, Seriennummer: 528-0, Baujahr: 2008, voll funktionsfähig; *6. Vertikalfräsmaschine; Marke URBAN, Modell M7CRH-100149891, Seriennummer 559, Baujahr: 2008, voll funktionsfähig; *7. Entgratmaschine mit 2 Fräsaggregaten; Marke URBAN, Modell SV 280, Seriennummer: 29342, Baujahr: 2008, voll funktionsfähig; *8. Stabtrennsäge; Marke URBAN, Modell GLS 102, Seriennummer: 102015, Baujahr: 2010, voll funktionsfähig; Die Produktionskapazität der Linie beträgt 30–50 Einheiten/8h (abhängig von der Anzahl der Bedienpersonen). Die Linie war von 2010 bis 2014 nur sehr wenig und nicht unter voller Auslastung im Einsatz. Einzelmaschinen aus der Linie können auf Anfrage verkauft werden. Nettopreis komplette Linie: 33.500 Euro zzgl. MwSt., verhandelbar, FCA Oradea.

Būklė: naudotas, rida: 835 837 km, galia: 309 kW (420,12 AG), pirmoji registracija: 11/2010, kuro tipas: dyzelinas, tuščias svoris: 9 580 kg, didžiausias leistinas svoris: 16 420 kg, bendras svoris: 26 000 kg, padangos dydis: 315/80R22.5, ašių konfigūracija: 6x2, ratų bazė: 4 800 mm, kuras: dyzelinas, stabdžiai: intarder, spalva: geltonas, vairuotojo kabina: miegamoji kabina, pavaros tipas: automatinis, emisijos klasė: Euro 5, pakaba: kitas, sėdimų vietų skaičius: 2, bendras ilgis: 9 480 mm, Gamybos metai: 2010, statybinis aukštis: 3 850 mm, lovų skaičius: 1, Įranga: ABS, borto kompiuteris, kruizo kontrolė, oro kondicionavimas, priekabos jungtis, trauki kontrolė,

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, galia: 36 kW (48,95 AG), kuro tipas: dyzelinas, spalva: geltonas, darbinė masė: 2 450 kg, padang padangų: 100 procentas, Gamybos metai: 2024, veikimo valandos: 8 h, Darbinis svoris: 2450 kg Priekinė ašies apkrova: 1400 kg Galinės ašies apkrova: 2100 kg Variklio gamintojas: 3 cilindrų Perkins, emisijos lygis STAGE V Pgedpfxoyvg N Re Apysk Variklio galia: 36 kW prie 2800 aps./min. Valdymo ratas: priedų įrangai Hidraulinė greitojo keitimo sistema: Euro tipo Priekabos jungtis: rutulinė / varžtinė Važiavimo greitis: 30 km/h versija

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2003, Complete plant with primary impact crusher, feed opening 2320x1700 mm. Mobile. Production capacity: 800 t/h, output size 0-40 mm, suitable for limestone. Secondary stage includes two Laron Lau 8 hammer mills, feed opening 1620x700 mm. Pjdpfslwya Nox Apyjgk

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2006, 1 used CONCRETE BATCHING PLANT Manufacturer: Liebherr Model: Betomix 1.0 Year of manufacture: 2006 Nominal capacity: 60 m³/hour compacted concrete Aggregate storage: 120 m³ (4 x 30 m³) as inline silo with weigh belt Mixer: Liebherr ring pan mixer 1.0-R Dosing: Aggregates: weigh belt Water: water scale Additives: additive scale Pgsdswk Hxhepfx Apysk Cement: cement scale Control container included Control system: SIMMA Cement silos: 3 x 100 t (transport dimensions D = 3 m, removable legs) INCLUDING VARIOUS SPARE PARTS IMMEDIATELY AVAILABLE Price INCLUDES DISMANTLING Offers and prices are net ex works Subject to prior sale, errors and/or misrepresentation reserved, no guarantee and/or warranty, sold as seen, lying and/or standing. Any reproduction, further use, publishing and/or copying of this offer is strictly prohibited!

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Conveyor belt length: approx. 28 m Discharge height: approx. 10 m Pjdpov Scaxefx Apyegk Feed hopper approx. 10 m³ with adjustable dosing conveyor belt 2 transport conveyors (one of which is flexible) on a 3-axle chassis Powered by ENDRESS generator set, 45 kVA,

Būklė: labai geros būklės (naudotas), Gamybos metai: 2004, Winch incl. Lifting capacity max. 2 t at 2.7 meters Pgodpfx Apjq N E U Ajyok Lifting capacity max. 1 t at 5.3 meters Operating hours: 270 h Electric: yes

Būklė: labai geros būklės (naudotas), The plant essentially consists of: - 2 feeding units (walking floor bunkers) - 2 silos, each with 55 cbm, equipped with discharge screws - 2 screw conveyors - 4 mixing and homogenization chambers Pgsdpfxjlxzl Eo Apyok - 5 transport conveyor belts - 2 parallel-operated twin-shaft extruders for processing woody biomass - 1 twin-shaft paddle mixer - twin-shaft extruder for homogenization - laboratory container with mixing and dosing system for liquid extracts

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2007, veikimo valandos: 22 605 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 100 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 600 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 1 100 mm, balo svoris: 1 400 kg, bendras svoris: 36 000 kg, alyvos bako talpa: 1 300 l, For sale is a refurbished baler with 100 t pressing force, large format 1100 x 1100 mm, 75 kW drive power, and a 10-fold cross-tying system. Technical Data – Baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main press force: 100 t Prepress force: 50 t Operating hours: 22,605 h Feed opening dimensions: 1,600 x 1,100 mm Filling volume per press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale dimensions: 1,100 x 1,100 mm Drive power: 75 kW Connected load: 126 kW Total current consumption: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput rates at a Bulk density of 30 kg/m³: approx. 16 t/h Bulk density of 50 kg/m³: approx. 25 t/h Bulk density of 100 kg/m³: approx. 47 t/h Bale weights up to 1,400 kg, depending on material and bale length Oil tank capacity: approx. 1,300 l PLC: Telemecanique TSX Micro Operator panel: Schneider MAGELIS Touch Baler dimensions assembled with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions baler only: 11,765 x 2,500 x 3,450 mm (L x W x H) Machine weight baler: approx. 36 t Psdsvf E Avjpfx Apyogk Remarks: The baler has been partially refurbished, serviced in our workshop, tested after completion, and stored. The machine is available at short notice and can be inspected at our warehouse by appointment. The following refurbishment works have been carried out: - Derusting and partial repainting of the baler - Complete draining of the hydraulic oil tank, replacement of oil and air filters - Refilled with new hydraulic oil - Replaced all hydraulic hoses - Disassembled, overhauled, and reassembled main hydraulic cylinder, two pre-press flap cylinders, and channel press cylinder: honed cylinder tubes, renewed all seal kits, and carried out final pressure test - Dismantled pre-press flap with bearings and bearing brackets. Removed and re-welded 1st and 3rd arc segment - Renewed both bearings on pre-press flap shaft - Renewed upper material retainer on pre-press flap frame - Dismantled the press ram, inspected and replaced both front running wheels - Removed and replaced material retainers and wear profiles on sides and bottom of the press ram - Dismantled, overhauled horizontal and vertical needle and tying units, replaced plastic sliding plates, bearings for twister shafts and wire guide pulleys on the needle heads - Replaced both bronze slide rails left and right in press ram frame cover - Renewed both wire redirect units left and right, incl. bale retention clamps - Fully renewed wire feeding unit incl. hydraulic cylinder under the needle passages - Welded and smoothed out wire grooves on the bottom and side walls of the press channel - General maintenance and service work according to manufacturer’s recommendations - Baler tested in both manual and automatic mode after completion of refurbishment, accepted and stored All technical information is provided without liability for errors or omissions.