Frezavimo staklė

TIGER FU90

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Grinding length: 973 mm Centre height: 250 mm Maximum swiveling of workpiece table: +6° / -9° Centre taper: MT5 Ledpfx Amswhp Dne Hshf Maximum travel of grinding spindle headstock: 100 mm Maximum swiveling of grinding spindle headstock: +45° / -30° Maximum grinding wheel diameter: 500 mm Speed range: 32 - 600 rpm Maximum workpiece weight between centres: 400 kg Internal grinding device, maximum grindable bore: 160 mm Machine weight: approx. 5,000 kg

Gamybos metai: 1940, būklė: naudotas, Automatic universal hobbing machine for the production of spur gears and worm gears. Ljdpfx Amokw T Rmj Hehf Maximum hobbing diameter: 120 mm Minimum hobbing diameter: 5 mm Smallest module: 0.30 Largest module: 2 mm Maximum hobbing length: 100 mm Supplied complete with all accessories.

Gamybos metai: 1955, būklė: naudotas, Radial drilling machine, drill press, radial arm drilling machine - Arm reach: 2055 mm - Max. distance from machine table to spindle mount: 1700 mm Lodpjd Enr Iofx Am Hohf - Taper: MT5 - Motor power: 7.5 kW - Spindle speeds: 11.2–1400 rpm - Column diameter: Ø 450 mm - Spindle stroke: 540 mm - Thread cutting device - Automatic feed: 0.037–2.0 mm/rev - Clamping area: 920 x 1600 mm - Dimensions: 2580/1110/H3450 mm - Weight: 6465 kg

Būklė: naudotas, Radial drilling machine CSEPEL Type RFh 75 / 1500 Machine No. 13704 Year of manufacture: 1985 Drilling capacity in steel Ø 75 mm Drilling capacity in cast iron Ø 90 mm Spindle taper MT 5 Nominal arm reach 1500 mm Maximum spindle reach 1500 mm (to column) Minimum spindle reach 440 mm (to column) Distance spindle nose – clamping surface 370 - 1700 mm Vertical adjustment of arm 950 mm Table size / clamping surface 1800 x 1100 mm Column diameter 450 mm Quill stroke 380 mm Spindle speed 19–1900 rpm, 21 steps Lhodpfx Amelhwr Ro Hjf Feed rate 0.047–2 mm/rev, 12 steps Motor power 11 kW Power supply 380 Volt, 50 Hz, 15 kW - Spindle clockwise/anticlockwise operation via hand lever switch - Hydraulic gearshift for spindle speed and feed rate - Hydro-mechanical central clamping - Motorized vertical arm adjustment - No coolant system - Machine lamp - Operating manual included Space required: Length 2720 mm x Width 1170 mm x Height max. 3770 mm Transport height with motor on column: 3500 mm Transport height without motor on column: 3250 mm Weight: 6.3 t Good condition

Būklė: geras (naudotas), Studer S30-12 Cylindrical Grinding Machine TECHNICAL DATA Main Dimensions Centre Height: 125 mm Distance Between Centres: 400 / 700 / 1025 mm Maximum Longitudinal Slide Travel: 400 / 700 / 1000 mm Longitudinal Slide Table Speed: 50 – 5000 mm/min Reversal Delay: 0-6 s Minimum Automatic Travel: 1.5 mm Max. Travel: 400 / 700 / 1020 mm Max. Table Swivel: 12 / 30 / 78° Cross Slide Swivel Range: ±45° Rapid Adjustment: 40 mm Feed Travel with Handwheel: 20 mm Maximum Plunge Depth: 1.7 mm Grinding Spindle Headstock Lodpfx Ajvca Izsm Hshf Grinding Wheel Diameter x Width x Bore: 450 x 80 x 203 mm Rotational Speed: 1340 / 1500 / 1625 / 1800 / 2000 / 2200 rpm Coarse Adjustment: 210 mm Workpiece Headstock Swivel Range: 0 – 90° Speed Range: 30 – 675 rpm Taper Mount: Morse 5 Collets: W25 Tailstock Taper Mount: Morse 3 Quill Travel: 30 mm Total Power Requirement: 5 / 8.25 kW No liability is accepted for the correctness, completeness or accuracy of the information provided.

Būklė: labai geros būklės (naudotas), Gamybos metai: 1999, Grinding wheel width max. 15 mm Grinding wheel diameter max. 110 mm Module – max. 0.5 – 10 Pressure angle 15 – 25° Speed 2800 rpm Total power requirement 0.4 kW Lhodpfx Amevibc Ho Hjf Machine weight approx. 0.02 t Space requirement approx. 0.4 x 0.2 x 0.2 m For profiling grinding worms for gear flank grinding machines. Finishing and re-profiling on the following models: NZA, AZA, RZ 300 E, RZ 301 S, RZ 362 A, AM,... Right adjustment plate with micrometer screw adjustment, axial Left adjustment plate with micrometer screw adjustment, radial 2 precision motor spindles for mounting diamond wheels.

Būklė: geras (naudotas), Magnetic table 455 x 170 mm Lhodpfx Aotu Il Tem Hjf Digital readout Water tank Dressing device Wet grinding unit

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2009, sukimosi skersmuo virš skersinio stumduko: 925 mm, tekėjimo ilgis: 2 800 mm, tekėjimo skersmuo: 1 200 mm, veleno skylė: 132 mm, veleno greitis (maks.): 2 000 aps./min, CNC Siemens 840D 48-position tool changer with Capto C8 tools Lhjdpfx Aswzyn Rom Hef Chip conveyor Forkardt 400 mm chuck, 2 SMW Autoblok hydraulic steady rests Capacity: 2800 x 1250 mm, spindle bore 132 mm Weight: 23,500 kg

Būklė: naudotas, Gamybos metai: 1965, Siūlomos dvi WMW SU 315x3000, prijungimo galia 1/2 mašina: 12,6/12 kW, svoris 1/2 mašina: 8,2/9 t, reikia kapitalinio remonto. Lsdpfxjxg Ihgo Am Hshf

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, ratlankio plotis: 800 mm, modulis 1-6 maks. skersmuo 600 mm digitalinis nuskaitymas Pilnas įrenginys su dokumentacija, įrankių laikikliais, keičiamomis pavaromis,... Lhodpsxhck Sofx Am Hef