Ilgio matavimo prietaisas

TESA SCAN 52

Gamybos metai: 2000, būklė: naudotas, x-travel 1000 mm y-travel 1600 mm z-travel 800 mm Control: WENZEL WPC 2040/FW31.351 Total power requirement: kW (not specified) Machine weight approx. 5500 kg Space requirement approx.: m (not specified) WENZEL CNC-controlled vertical 3-D coordinate measuring machine Model: LH 108 CNC Year of manufacture: 2000, but continuously serviced and calibrated by manufacturer Axis configuration: - Y-axis as long-travel measuring bridge: 1,600 mm - X-axis as measuring head carriage (cross travel): 1,000 mm - Z-axis as vertical measuring quill: approx. 800 mm Maximum workpiece weight / table load: approx. 2,250 kg Clearance under measuring bridge: approx. 900/1000 mm Overall table size: approx. 2,600 x 1,250 mm Table height above floor: approx. 700 mm Table plate thickness: 380 mm Machine height: approx. 3,100 mm Weight: approx. 5,500 kg Special Features / Accessories: • Measuring table, crossbeam, and quill made from dark natural hard stone; table with 6 x 9 threaded holes for workpiece/fixture clamping • All axes are air-bearing for smooth, virtually wear-free operation; equipped with incremental scales, 0.0005 mm resolution • WENZEL CNC control type WPC 2040 / FW31.351 built into worktable (controller replaced approx. 3 years ago) • WENZEL measurement software METROSOFT QUARTIS R 12 SP 1 with SurfPro package and QUARTIS Q-DAS • RENISHAW motorized rotary and swivel head (automatically indexable in 7.5° increments), probe head model PH 10 M plus, with TP 20 probe and various probe accessories • RENISHAW probe head controller unit type PHC 10 C-3 plus, also built into the worktable Dsdpfxot Hw Nys An Hech • Automatic probe changer, 6-position probe magazine model MCR 20 mounted on the table • Mobile hand control panel with progressive control lever (joystick) for manual adjustment of all 3 axes with infinitely variable travel speeds • Sphere standards for table setup, work table, various clamping devices, etc. Condition: Very good – generally in stock, powered for inspection. Ready for demonstration. Disassembled by a CMM specialist at the seller and reassembled here. Delivery: Ex-stock – as is, as inspected Payment: strictly net – upon receipt of invoice.

Gamybos metai: 2001, būklė: labai geros būklės (naudotas), Schütte AG20 multi-spindle automatic lathe Dcedpfx Ashrihyon Hsh

Būklė: naujas, Gamybos metai: 2024, veleno ilgis po galvute: 80 mm, sriegio ilgis: 55 mm, važiuojamoji greitis (maks.): 480 mm/min, E.W. MENN GW63 Flat Die Thread Rolling Machine with Rack-Type Dies Completely overhauled as new. New guides, vibrator, and new vibrating discharge system. Dcsdot Uucaopfx An Hjh New electrical system with inverter and PLC control. Thread size: M8 x 80/55 mm. Production rate: 480 pieces per minute. Thread diameter (min./max.): 3 - 8 mm. Die length: 115/130 mm. Available for inspection and testing at HBR Srl - Calolziocorte (LC).

Būklė: naudotas, Gamybos metai: 1987, Technical details: Djdpsmf Aw Asfx An Hoch Number of spindles: 8

Būklė: naudotas, Gamybos metai: 1990, Techniniai duomenys: Tekinimo skersmuo: 445 mm Tekinimo ilgis: 2000 mm Tekinimo skersmuo virš stovo: 660 mm Veleno skylė: 65 mm Veleno apsukos: 16 – 3150 aps./min. Greitasis judėjimas X kryptimi: 10 mm/min Greitasis judėjimas Z ašyje: 15 m/min Bendras galingumo poreikis: 34 kW Staklių svoris apie: 7,5 t Užimamas plotas apie: 6 x 2,5 x 2,2 m Su CNC valdymu TX 8 D C ašis su varomais įrankiais Revolverinė galvutė su 14 pozicijų Trys žandai, Ø 315 mm Dedpfx Asw I R Ndjn Hech Atraminis stovai, luneta SMW SLK 520 N kaip NC ašis Įvairūs varomieji įrankių laikikliai Įvairūs tekinimo įrankių laikikliai Drožlių transporterio ir aušinimo skysčio sistema

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, tekėjimo ilgis: 700 mm, tekėjimo skersmuo: 230 mm, ašies variklio galia: 25 W, veleno greitis (maks.): 5 000 aps./min, X ašies eiga: 165 mm, Y ašies eiga: 100 mm, Z ašies eigos atstumas: 700 mm, veleno nosis: ASA 8, CNC FANUC TRAVELS X Axis: 165 mm Z Axis: 700 mm Y Axis: 100 mm X2 Axis: 165 mm Z2 Axis: 700 mm Y2 Axis: 100 mm CAPACITY Max swing diameter: 230 mm Max turning diameter: 230 mm Max turning length: 700 mm Max bar working diameter: 65 mm Dcjdpfjy Apcaox An Hsh SPINDLE Spindle nose: ASA 8'' Spindle speed: 5,000 rpm Spindle bore: 80 mm Spindle motor power: 25 kW SUBSPINDLE Subspindle nose: ASA 8'' Subspindle speed: 5,000 rpm Subspindle bore: 80 mm Subspindle motor power: 25 kW UPPER TURRET Number of stations: 12 Power of driven tools: 7.5 kW LOWER TURRET Number of stations: 12 Power of driven tools: 7.5 kW Machine is equipped with: • Two high pressure pumps 35 bar with inverter • Linear scales • Two collet chucks as shown in the pictures • Basic kit of driven and static tool holders • Instruction manuals and CE declaration

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2013, Funkcionalumas: visiškai funkcionalus, matavimo diapazonas X ašis: 600 mm, matavimo diapazonas Y ašis: 1 000 mm, matavimo diapazonas Z ašis: 600 mm, ruošinio svoris (maks.): 300 kg, Įrenginys puikios būklės, beveik nenaudotas. Pilnas komplektas su kompiuteriu ir darbo stalu. Dcodpfexr Ulpox An Hsh

Būklė: naudotas, Gamybos metai: 2005, Turning diameter: 275 mm Turning length: 900 mm Control system: TRAUB TX8i Spindle bore: 65 mm Drive power, 100% duty cycle: 25.20 kW Drive power, 40% duty cycle: 30.20 kW Torque at 40% / 100% duty cycle: 180 / 135 Nm Spindle speeds, stepless: 1 - 5,000 rpm Spindle diameter in front bearing: 110 mm C-axis: 1 - 500 rpm Tool turret No. 1 X-axis: 290 mm Y-axis: 165 mm Z-axis: 600/950 mm B-axis: 360° Rapid traverse X/Y/Z: 18 / 18 / 30 m/min Feed force X/Y/Z: 10 / 10 / 7 kN Number of tools: 2x2 + 2x2 Number of driven tools: 2x2 + 2x2 mm Tool speeds: 8,000 / 2,000 rpm Drive power, 25% duty cycle: 5.80 kW Torque at 25% duty cycle: 4x18.6 / 4x74 Nm Dcodew E Nnbepfx An Hoh Tool holder: TRAUB Ø60 Tool turret No. 2 / No. 3 / No. 4 X-axis: 170 mm Z-axis: 600/950 mm Y-axis: +/- 60 mm Rapid traverse X/Y/Z: 18 / 15 / 30 m/min Feed force X/Y/Z: 10 / 10 / 7 kN Turret - number of stations: 10 Number of driven tools: 10 mm Tool speeds: 1 - 6,000 rpm Drive power, 25% duty cycle: 5.80 kW Torque at 25% duty cycle: 18.60 Nm Tool holder: DIN 69880 Ø40x63 Bar feeder: DNH61 / 3000 Bar lengths: 1,000 - 3,200 mm Bar diameter: 18 - 63 mm Max. hexagon: 45 mm Total power requirement: 95.00 kW Machine weight approx.: 16.00 t Installation dimensions approx.: 10.00 x 3.50 x H3.00 m Equipped with TRAUB TX 8i control, main and counter spindle with C-axis, 3 turret tool carriers, 1 vertical tool carrier with B-axis, extraction system, chip conveyor, coolant system with coalescence separator. Bar loader: TRAUB Stamag DNH61 / 3000 2 pcs. 3-jaw chucks SMW KNCS-N 170-43 2 pcs. HAINBUCH collet chucks 40 pcs. various static tool holders 6 pcs. various driven tool holders Spare parts package The machine can be inspected under power.

Būklė: naudotas, Gamybos metai: 2007, Sukimosi skersmuo: 600 mm Apsukimo skersmuo: 680 mm Tekinimo aukštis: 600 mm Z ašis: 500 mm X ašis: 560 mm Pagrindinės verpstės pavaros galia: 65/80 kW Dsdpfjv Rrq Dex An Hsch Pagrindinės verpstės apsukos: 2800 Ruošinų keitiklis: 12 vietų Z ašies pastūma: 0,01–30 000 mm/min X ašies pastūma: 0,01–45 000 mm/min Griebtuvas: Rota NCR 630 mm Įtampa: 400 V Dažnis: 50 Hz Valdymas: Siemens 840 D pl Bendras galingumo poreikis: 140 A Staklių svoris apie 18 t Užimamas plotas apie 6,5 x 3,8 x 4,20 m Įskaitant padėklą su įrankiais.

Gamybos metai: 1987, būklė: naudotas, mašinos/transporto priemonės numeris: 7.0176, Note: We have 6 units of this machine in stock! Manufacturer: Gildemeister Model: GS 36 – 6 A/C Machine No.: 7.0176 Year of manufacture: 1987 Weight: 11 t General / technical data: Portal 6-spindle automatic lathe Spindle pitch circle: 300 mm Number of longitudinal slides: 6 Number of cross slides: 2 Max. cross slide travel: 60 mm Max. longitudinal slide travel: 125 mm Spindle speeds: Infinitely variable 562 – 3373 rpm Main time range: Infinitely variable 1.95 – 78 seconds Secondary time range: 0.79 – 2.13 seconds Drive power: DC spindle motor 20 kW; feeds 8 kW Installation area: approx. 1720 x 4700 mm Note: The machine cannot be converted for bar work. Equipment: – 1 creep speed drive for setup operation – 1 automatic central lubrication system – 1 coolant system with piping and pump – 1 facing slide, position 3 (without cams) – 1 facing slide, position 5 – 6 longitudinal slides (without drive, without cams) – Feed for independent longitudinal slide, flexible, position 1–6 – Programmable logic controller IPC 620 – Noise protection measures 80db – Automatic feed re-engagement with electrical interlock for side door – Hinge belt chip conveyor – Machines equipped with DC drives for spindle speed and feed – KIENZLE terminal 2450-07 with signal interface and data transmission control Dsdpfx Anjin Ub Ts Hech Accessories: Electrical configuration: The electrical equipment consists of a direct current main drive with 20 kW output for the spindle and a three-phase servomotor for the feed drive with an output of 8 kW (protection class IP 54), as well as the appropriate switching and control devices and all required installation. Total connected load of the machine: 32 kW/h.