šlavimo mašina

Tennant S30 LPG

Sąlyga: naudotas, Gamybos metai: 2011, veikimo valandos: 382 h, The Tennant S30 is the larger variant of the S20, offering a bit more capacity while delivering the same reliably superior cleaning results. Designed for dependable, industrial-grade cleaning of both indoor and outdoor surfaces. Chsdonyivtspfx Admof The S30 efficiently collects all types of debris, from fine dust to light litter, across various surfaces. Dust capture is superb thanks to the integrated filtration system, ensuring minimal dust emission during sweeping operations. The robust LPG engine guarantees the machine is always ready for use, wherever it's needed! Upon purchase, the sweeper will be fully prepared according to your specifications, delivering a machine tailored to your requirements and perfectly suited to your application.

Sąlyga: naudotas, Gamybos metai: 2006, Gamintojas: Weinig Modelis: Unimat Super 4 Pagaminimo metai: 2006 Codpfxjqprk Ts Admohf Keturių pusių obliavimo staklės Gamintojas: WEINIG, restauruotos Modelis: UNIMAT SUPER 4 su trumpų ruošinių mechanizacija EM15 - Pagaminimo metai: 2006 Techninės specifikacijos - Darbinis plotis: maks. 150 mm - Darbinis plotis: min. 25 mm - Darbinis aukštis: maks. 50 mm - Darbinis aukštis: min. 15 mm - Velenų skaičius: 3 - Viršutinio veleno galia: 22 kW - Apatinio veleno galia: 11 kW - Velenų apsisukimų skaičius: maks. 7.000 aps./min - Veleno skersmuo: 40 mm - Stalo ilgis: 2.000 mm - Maks. padavimo greitis: 24 m/min - Nuolatinis padavimo greičio reguliavimas - Atskiras variklis kiekvienam velenui - Padavimo volas su kardanine pavara - Padavimas iš žurnalo - Motorizuotas obliavimo aukščio reguliavimas - Automatinė tepimo pompa - WEINIG veidinio frezavimo galvutė - WEINIG EM 15 - Bendra galia: 45 kW

Sąlyga: naujas, Instead of €14,874 gross RRP, now only €9,499 net (€11,304 gross incl. 19% VAT). You save 24% compared to the RRP! 150-ton straightening press with electric motor and additional manual hand operation via a hand lever pump, specifically designed for precision work. Available models: Chsdpfsf Sqckjx Admof 30t 60t 100t 150t 200t >200t: on request Custom machines: on request Brand new machine! We are also happy to build a custom press to your specifications. High-quality hydraulic workshop press with a maximum pressing force of 150 tons. The press can also be operated in the traditional electric mode via a lever for both upward and downward movement. For precise tasks (e.g., pressing in bearings, straightening, etc.), the press is also equipped with a hand pump, allowing you to finely control the force manually. The pressure cylinder is mounted on a movable carriage, allowing it to be shifted laterally. This enables you to make optimal use of the maximum frame passage width. Features: - 150 tons maximum pressing force - Pressure gauge with manometer - 2 operating modes: electric operation or manual operation - 2 independent hydraulic pumps - Control cabinet with motor protection monitoring and safety features - Adjustable working height - Draw chains for easy adjustment of the working height - Sturdy machine frame - Cylinder laterally adjustable (mounted on movable carriage) The press can be tested under power on site. ----- Many other workshop presses in various models, sizes, and with optional additional equipment available! 30, 60, 100, 150, 180, 200 tons. ----- Please feel free to contact us; we will be happy to advise you without obligation. The quoted price is net plus 19% VAT. All information subject to change. Europe-wide delivery available! ----- The European Commission provides an online platform for out-of-court dispute resolution (OS platform). This offer serves solely as an online presentation of our products. Contract negotiations take place via telecommunications (email, fax, telephone, message portal), during which we will first provide you with a non-binding quote, along with information about our general terms and conditions and the right of withdrawal including our imprint, before any purchase or contract comes into effect.

Gamybos metai: 2014, Sąlyga: geras (naudotas), For sale: Nilfisk Compact Industrial Safety Vacuum Cleaner Model: CTS40 M Z22 400 V 4 kW 9 A 50 Hz 114 kg ATEX explosion-proof Codpfohu Sf Hex Admshf The vacuum cleaner is in good condition and ready for immediate use. Machinery purchase / sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, AND MUCH MORE. Do you need a high-quality, yet affordable metalworking machine for your production? Or are you looking to sell your equipment? For more information or to contact us, please visit our website.

Sąlyga: naujas, Techniniai duomenys: Talpa: 100 t Montavimo aukštis: 1010 mm Didžiausia darbo sritis: 1010 x 300 mm Stūmoklio eiga: 400 mm Pirmyn eiga: 7,12 mm/s Atgal eiga: 13,42 mm/s Variklio galia: 4 kW Plotis: 1600 mm Gylis: 850 mm Aukštis: 2450 mm Csdpsk Nz N Eefx Admjhf Svoris, apie: 1000 kg Įranga: - Šoniniu būdu slankiojantis cilindras - Erdvi darbo sritis - Reguliuojamas darbinio stalo aukštis - Sukimui atspari, suvirinto plieno konstrukcija - Manometras - Tikslus slėgio reguliavimas - Papildomas rankinis siurblys Atraminiai prizmai galimi už papildomą mokestį.

Sąlyga: geras (naudotas), Gamybos metai: 2010, Industrial vacuum cleaner, dust extractor, vacuum cleaner, industrial dust collector, floor vacuum, safety industrial vacuum cleaner -EX: protected -Manufacturer: Nilfisk, ultra-compact industrial vacuum with side channel blower -Type: CTS22 H Z22 -Connection: 400 Volt Chedpjgl Duzofx Admef -Power: 2.2 kW -Quantity: 3 units available -Price: per unit -Dimensions: 1100/770/H1270 mm -Weight: 127 kg/unit

Sąlyga: naudotas, veikimo valandos: 2 572 h, The Tennant M30 increases productivity by delivering exceptional sweeping and scrubbing performance, while also improving health and safety standards. The machine is easy to operate and maintain, and it quickly enhances your facility’s image by cleaning in a single pass (wet or dry). It also cleans up to three times longer on one tank of water, using Tennant’s innovative ec-H2O technology which reduces water consumption by up to 70%. This Tennant M30 comes standard with: - Complete maintenance service - New battery pack - Free on-site delivery - New wear parts and squeegees - Service and overhaul - Training and instruction - Cleaning agents - Brushes and accessories tailored to your floor Other specifications: - Type: Ride-on sweeper-scrubber - Condition: Used - Brand: Tennant - Model: M30 - Operator type: Ride-on - Theoretical capacity: 15,860 m²/h - Side brush diameter: 53 cm - Scrubbing width: 157 cm - Squeegee width: 150 cm - Number of scrub brushes: 2 - Brush type: Cylindrical - Scrub brush size: 30.5 x 122 cm - Scrub brush pressure: 193 kg - Hopper capacity: 198 liters - Solution tank capacity: 284 liters - Recovery tank capacity: 360 liters - Power source: 36V battery - Hopper discharge: High-dump system - Maximum dump height: 152 cm - Filter surface area: 7.3 m² - Filter type: Panel filter - Maximum speed: 13 km/h - Maximum gradient: 10% - Drive type: Rear-wheel drive Chodpfx Asnyiv Nsdmjf - Filter shaker: Electric - Weight (excluding batteries): 1,815 kg - Weight (including batteries): 2,449 kg - Dimensions (LxWxH): 274 x 162 x 147 cm - Availability: In stock - Operating hours: 2,572 hours In addition, Metech offers all maintenance services for this machine, as well as reordering of cleaning agents. Alongside this used Tennant M30, we also have new and used sweeper-scrubbers available. Check out our sweeper-scrubbers for more information. Want to know more about this Tennant M30? Contact us—our team is happy to provide more details.

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1990, veikimo valandos: 4 452 h, Funkcionalumas: visiškai funkcionalus, pjovimo aukštis (maks.): 120 mm, pagrindinis pjūklo diskas skersmuo: 380 mm, pjovimo gylis: 340 mm, Raimann KR 310 E 340/120 Multi-blade Saw with Movable Saw Blade - Made in Germany - Year of manufacture: 1990 - Technical documentation (DTR) Codpfxerhig Ej Admjhf - Operating hours: 4452 h TECHNICAL SPECIFICATIONS: - Track width: 340 mm - Max. cutting height: 120 mm - Cutting height with movable blade: 85 mm - Motor power: 30 kW - Minimum workpiece length: 700 mm - Table width: 740 mm - Feed rate adjustable by inverter: 6–48 m/min - Three rows of pawls - Option for fitting a pressure shoe - Arbor diameter: 80 mm - Fixed arbor length: 190 mm - Electric cutting height adjustment - Electric spindle height adjustment - Four upper pressure rollers - Automatic central lubrication - Laser - Fence - Extraction port diameter: 250 mm Machine dimensions: 250 x 200 x 220 cm Weight: 2000 kg

Sąlyga: naujas, Gamybos metai: 2024, SCHORR Ride-on Sweeper Electric Sweeping Machine Street Sweeper Floor Cleaner Powerful and smooth-running sweeper for indoor and outdoor use. Equipped with an optional spray nozzle. The ride-on sweeper provides a comfortable and efficient solution for floor cleaning. The ergonomic seat and intuitive controls enable effortless operation, even over extended periods. The powerful motor ensures thorough cleaning even in demanding conditions. With a generous 80-litre debris hopper, large areas can be cleaned without frequent interruptions. This combination of comfort and efficiency makes floor cleaning a stress-free and pleasant task. Standard LED work lights make it easier to work in darker areas. With 1920 watts of power delivered by a 48V system, the sweeper is well equipped to provide you with over 4 hours of continuous operation. SCHORR Ride-on Sweeper RR80KM – Discover the advantages: -- Fully electric ride-on sweeper with 1250mm working width – ideal for large indoor and outdoor areas -- 48V/1920W power -- 80-litre bagless rear debris hopper, easily extendable and emptied -- Powerful 48V, 58Ah system -- Optional spray nozzle for reduced dust emission -- Extremely simple operation -- Outstanding manoeuvrability Technical Data Manufacturer (Short): SCHORR Manufacturer Model: RR80KM Drive: Ride-on Power: 1920W Operating time: approx. 4 hours Number of wheels: 4 Tyres: PU (non-slip) Net weight: 400kg Basic Dimensions Debris hopper volume: 80l Fresh water tank volume: 10l Main brush diameter: 500mm Overall length: 1600mm Overall height: 1300mm Overall width: 1250mm Sweeper width (without brushes): approx. 80cm *Additional technical data available upon request. The chassis is made entirely of flexible and robust plastic, minimising the risk of damage to objects such as walls. Apart from the side brushes, no components protrude beyond the body, allowing work as closely as possible to objects. The debris hopper is made of rigid steel and can be conveniently removed from the rear of the machine. Sensitive components like the front lights are protected by a metal bumper. Overall, the machine is perfectly equipped for most applications. Naturally, we generally keep all spare parts in stock and can deliver them quickly should you ever encounter a problem. If you require technical support, we have the necessary expertise and can also carry out repairs in our in-house workshop. Would you prefer to finance or lease the device? No problem! We also offer attractive options for this. Feel free to contact us and we will advise you on the various possibilities. We look forward to your enquiry! The SCHORR team will be glad to assist you with any questions regarding our ride-on sweeper. Our knowledgeable staff are available by phone or e-mail. We look forward to hearing from you and providing support with your enquiry. Cjdpfx Adsuac D Uomehf

Sąlyga: labai geros būklės (naudotas), Panel loading at 15 cycles per minute, complete with motorized roller conveyors Chjdpfx Adehv Sttsmsf Loader